• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.2
• /
• pp.16-22
• /
• 2011

It is recognized that the control surface fault is detected by monitoring the value of the coefficients due to the control surface deviation. It is found out the control surface stuck position by comparing the trim value with the reference value. To detect and isolate the fault, two mixed methods apply to the real-time parameter estimation and similarity measure. If the scatter of aerodynamic coefficients for the fault and normal are closing nearly, fault decision is difficult. Applying similarity measure to decide for fault or not, it makes a clear and easy distinction between fault and normal. Low power processor is applied to the real-time parameter estimator and computation of similarity measure.

• Journal of the Korean Society of Visualization
• /
• v.6 no.2
• /
• pp.28-32
• /
• 2008

Contrary to the flow rate in fully filled pipe flows, the flow rate in partially filled pipe flows is significantly influenced by the variation of water level, channel slop, and so on. The major difference in these two flows results from the existence of a free surface. To make it clear, in the present study, a similarity of the velocity profile in a partially filled circular pipe has been investigated according to the water level. A particle image velocimetry (PIV) technique was applied to measure the three-dimensional velocity profiles. As a result, there is found a similarity of the velocity profile near the central region. However, near the side wall, the similarity is broken due to the interaction between the wall and the free surface.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.396-402
• /
• 2004

The purpose of this study was to investigate the difference of cotton fabric texture perceived between on-line(screening fabric) and off-line(real fabric), and to analyze fabric characteristics having an effect on the difference. The similarity of 55 various cotton fabrics perceived between on-line and on-line were measured showing simultaneously real fabrics and screening fabrics by 7-scale questionnaire. And the characteristics of cotton fabrics such as weave structure, thickness, weight, fabric density, stiffness, Hunter's L, a, b, and hue were measured. Cotton fabrics were classified into 3 groups by extent of similarity. There were no significant differences in weft density, stiffness, Hunter's L, a, b, and hue among 3 groups. But there were significant differences in weave structure, thickness, weight, warp density, and difference of warp ＆ weft density. The fabrics having large similarity were thick and heavy, had small warp density and difference of warp ＆ weft density, and distinct surface texture. The group having medium similarity included fabrics of medium thickness and weight, having weak surface texture, large warp density and difference of warp ＆ weft density. The group having small similarity, which the differences between on-line and off-line were large, included thin and light fabrics having smooth surface and large warp density and difference of warp ＆ weft density.

• Journal of Educational Research in Mathematics
• /
• v.16 no.2
• /
• pp.115-138
• /
• 2006

The purpose of this paper is to investigate students' constructing similarities in the understanding the problem phase and the devising a plan phase of problem solving. the relation between similarities that students construct and how students construct similarities is researched through case study. Based on the results from the research, authors reached a conclusion as following. All of two students constructed surface similarities in the beginning of the problem solving process and responded to the context of the problem information sensitively. Specially student who constructed the similarities and the difference in terms of a specific dimension by using diagram for herself could translate the equation which used to solve the base problem or the experienced problem into the equation of the target problem solution. However student who understood globally the target problem being based on the surface similarity could not translate the equation that she used to solve the base problem into the equation of target problem solution.

• Atmosphere
• /
• v.24 no.4
• /
• pp.471-479
• /
• 2014

A road surface temperature prediction model (UM-Road) using input data of the Unified Model (UM) output and road physical properties is developed and verified with the use of the observed data at road weather information system. The UM outputs of air temperature, relative humidity, wind speed, downward shortwave radiation, net longwave radiation, precipitation and the road properties such as slope angles, albedo, thermal conductivity, heat capacity at maximum 7 depth are used. The net radiation is computed by a surface radiation energy balance, the ground heat flux at surface is estimated by a surface energy balance based on the Monin-Obukhov similarity, the ground heat transfer process is applied to predict the road surface temperature. If the observed road surface temperature exists, the simulated road surface temperature is corrected by mean bias during the last 24 hours. The developed UM-Road is verified using the observed data at road side for the period from 21 to 31 March 2013. It is found that the UM-Road simulates the diurnal trend and peak values of road surface temperature very well and the 50% (90%) of temperature difference lies within ${\pm}1.5^{\circ}C$ (${\pm}2.5^{\circ}C$) except for precipitation case.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.34-40
• /
• 2023

In this study, real-time collection of mold vibration signals during injection molding processes was achieved through IoT devices installed on the mold surface. To analyze changes in the collected vibration signals, injection molding was performed under six different process conditions. Analysis of the mold vibration signals according to process conditions revealed distinct trends and patterns. Based on this result, cosine similarity was applied to compare pattern changes in the mold vibration signals. The similarity in time and acceleration vector space between the collected data was analyzed. The results showed that under identical conditions for all six process settings, the cosine similarity remained around 0.92±0.07. However, when different process conditions were applied, the cosine similarity decreased to the range of 0.47±0.07. Based on these results, a cosine similarity threshold of 0.60~0.70 was established. When applied to the analysis of mold vibration signals, it was possible to determine whether the molding process was stable or whether variations had occurred due to changes in process conditions. This establishes the potential use of cosine similarity based on mold vibration signals in future applications for real-time monitoring of molding process changes and anomaly detection.

• Journal of Educational Research in Mathematics
• /
• v.25 no.1
• /
• pp.95-111
• /
• 2015

The purpose of this study is to analyze cases on teaching solutions exploration of Wythoff's game through using the analogy for the gifted elementary students, to suggest useful teaching methods. Students recognized structural similarity among problems on the basis of relevance of conditions of problems. The discovery of structural similarity improves the ability to solve problems. Although 2 groups-NIM game with surface similarity is not helpful in solving Wythoff's game, Queen's move game with structural similarity makes it easier for students to solve Wythoff's game. Useful teaching methods to find solutions of Wythoff's game through using the analogy are as follow. Encoding process helps students make sense of the game. It is significant to help students realize how many stones are remained and how the location of Queen can be expressed by the ordered pair. Inferring process helps students find a solution of 2 groups-NIM game and Queen's move game. It is necessary to find a winning strategy through reversely solving method. Mapping process helps students discover surface similarity and structural similarity through identifying commonalities between the two games. It is crucial to recognize the relationship among the two games based on the teaching in the Encoding process. Application process encourages students to find a solution of Wythoff's game. It is more important to find a solution by using the structural similarity of the Queen's move game rather than reversely solving method.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.23-30
• /
• 2017

PURPOSES : In this paper, the applicability of DEM to a coarse graining method was evaluated by simulating a series of minicone tests for cement paste. METHODS : First, the fundamental physical quantities that are used in a static liquid bridge model were presented with three basic quantities based on the similarity principle and coarse graining method. Then, the scale factors and surface tensions for six different sizes of particles were determined using the relationship between the physical quantities and the basic quantities. Finally, the determined surface tensions and radii were utilized to simulate the fluidal behavior of cement paste under a minicone test condition, and the final shape of the cement paste with reference DEM particle radii was compared with the final shape of the others. RESULTS : The simulations with adjusted surface tensions for five different radii of particles and surface tension showed acceptable agreement with the simulation with regard to the reference size of the particle, although disagreement increases as the sizes of the particle radii increase. It seems reasonable to increase the particle radii by at least 0.196 cm considering the computational time reduction of 162 min. CONCLUSIONS : The coarse graining method based on the similarity principle is applicable for simulating the behavior of fluidal materials when the behavior of the materials can be described by a static liquid bridge model. However, the maximum particle radius should be suggested by considering not only the scale factor but also the relationship of the particle size and number with the radius of the curve of the boundary geometry.

• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.330-336
• /
• 2016

The present work is concerned with heat and mass transfer of an electrically conducting second grade MHD fluid past a semi-infinite stretching sheet with convective surface heat flux. The analysis accounts for thermophoresis and thermal radiation. A similarity transformations is used to reduce the governing equations into a dimensionless form. The local similarity equations are derived and solved using Nachtsheim-Swigert shooting iteration technique together with Runge-Kutta sixth order integration scheme. Results for various flow characteristics are presented through graphs and tables delineating the effect of various parameters characterizing the flow. Our analysis explores that the rate of heat transfer enhances with increasing the values of the surface convection parameter. Also the fluid velocity and temperature in the boundary layer region rise significantly for increasing the values of thermal radiation parameter.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.3
• /
• pp.407-414
• /
• 1996

In this paper we consider the variable structure control for a class of discrete-time uncertain multivariable systems where the nominal system is linear. Discrete-time switching dynamics are introduced so that a new type of state trajectories called sliding mode may exist on the sliding surface by state feedback. The quantitative analysis for the matched uncertainties will show that every response of the system with the proposed switching dynamics is bounded within small neighborhoods of the state-space origin. Also, by the similarity transformation it will be shown that the eigenvalues of the closed-loop systems are composed of those of the subsystems which govern the range-space dynamics and null-space dynamics. It will be also shown that ideal sliding mode can be obtained in the absence of uncertainties due to one-step attraction to the sliding surface regardless of initial position of states. (author). 12 refs., 2 figs.