• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.317-328
• /
• 2017

This paper presents design and specific absorption rate analysis of a 2.4 GHz wearable patch antenna on a conventional and electromagnetic bandgap (EBG) ground planes, under normal and bent conditions. Wearable materials are used in the design of the antenna and EBG surfaces. A woven fabric (Zelt) is used as a conductive material and a 3 mm thicker Wash Cotton is used as a substrate. The dielectric constant and tangent loss of the substrate are 1.51 and 0.02 respectively. The volume of the proposed antenna is $113{\times}96.4{\times}3mm^3$. The metamaterial surface is used as a high impedance surface which shields the body from the hazards of electromagnetic radiations to reduce the Specific Absorption Rate (SAR). For on-body analysis a three layer model (containing skin, fats and muscles) of human arm is used. Antenna employing the EBG ground plane gives safe value of SAR (i.e. 1.77W/kg<2W/kg), when worn on human arm. This value is obtained using the safe limit of 2 W/kg, averaged over 10g of tissue, specified by the International Commission of Non Ionization Radiation Protection (ICNIRP). The SAR is reduced by 83.82 % as compare to the conventional antenna (8.16 W/kg>2W/kg). The efficiency of the EBG based antenna is improved from 52 to 74 %, relative to the conventional counterpart. The proposed antenna can be used in wearable electronics and smart clothing.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.79-90
• /
• 2009

This paper presents the development of dynamically combined Typhoon generated surge-tide-wave numerical model which is applicable from deep to shallow water. The dynamically coupled model consists of hydrodynamic module and wind wave module. The hydrodynamic module is modified from POM and wind wave module is modified from WAM to be applicable from deep to shallow water. Hydrodynamic module computes tidal currents, sea surface elevations and storm surges and provide these information to wind wave module. Wind wave mudule computes wind waves and provides computed information such as radiation stress, sea surface roughness and shear stress due to winds. The newly developed model was applied to compute the surge, tide and wave fields by typhoon Maemi. Verification of model performance was made by comparison of measured waves and tide data with simulated results.

• Journal of Environmental Science International
• /
• v.18 no.5
• /
• pp.539-550
• /
• 2009

This study found that tropical cyclones (TCs) formed for fall in 2007 over the western North Pacific were distributed in high-latitudes comparing to 56-year (1951-2006) climatological mean. The frequency and latitude of TC genesis became higher than 56-year climatological mean from September onward in 2007 and all the TCs that formed to the north of 20$^{\circ}$N was also distributed after September in 2007. These characteristics of TC genesis for fall in 2007 could be confirmed through analyzing various variables, such as a large-scale atmospheric circulation, outgoing longwave radiation (OLR), vertical zonal wind shear, and sea surface temperature (SST). On the other hand, a frequency of the TC that occurred to the north of 200N showed a clear interdecadal variation and its decreasing trend was distinctive in recent years. Its intensity was also weaker that TCs that did to the south of 20$^{\circ}$N. However, a latitude of TC genesis showed an increasing trend until recent years, whose variation was consistent with trend that through a SST analysis, warm SST went north in recent years.

• Journal of the Korean earth science society
• /
• v.37 no.7
• /
• pp.465-475
• /
• 2016

The diurnal and semidiurnal tides in the global atmosphere are examined using 3-hourly geopotential height field of the state-of-the-art reanalysis data. Unlike the previous studies, the spatial structure and seasonality of those tides are analyzed from the surface of the earth to the stratosphere. It is found that, at most levels, diurnal tide is strong in the midlatitudes while semidiurnal tide is predominant in the tropics. The former shows strong seasonal cycle with a larger amplitude in summer than in winter in both hemispheres. This is different from the semidiurnal tide which has essentially no seasonal cycle. In term of the vertical structure, while semidiurnal tide has a barotropic structure, diurnal tide exhibits a distinct vertical structure with increased amplitude and height. Especially tropical diurnal tide exhibits a nearly opposite phase from the surface to the free troposphere, and to the upper stratosphere. Its amplitude also varies nonlinearly with height, possibly influenced by water vapor, ozone, gravity waves and solar radiation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1090-1099
• /
• 2004

In this paper a novel design of equilateral-triangular microstrip antenna using PIN diode fur switching the resonant frequency is presented and experimentally studied. The proposed antenna has changed the resonant frequency by length of spur-lines on the patch, and PIN diodes are utilized to switch the spur-line on and off. The shape of the spur-line is changed according to the on and off states of PIN diode and the equilateral triangular microstrip antenna has different resonant frequencies in accordance with them. The resonant frequency is 1.22 GHz with off states since the surface currents flow the periphery of T shape spur-lines, while the resonant frequency is 1.82 GHz with on states since the surface currents are little effect with the conventional equilateral triangular microstrip antenna. The radiation pattern of the proposed antenna has a good linear polarization with the cross polarization of -20 dB both with on and off states.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.398-407
• /
• 2007

In this paper we proposed the tag antenna with a low performance distortion from an attached surface material using the asymmetric dual-arm dipole antenna(ADDA) structure. The tag is designed to exhibit low performance changes when the tag is attached on a target object(the medical litter receptacle, ${\varepsilon}_r=1.7,\;tan\;{\delta}=0.002$). Detail design parameters for the proposed antenna are optimized to maintain a good readable range in free-space as well as on a target object. The size of the optimized antenna is $100\;mm{\times}50\;mm$. The antenna shows the matching bandwidth($S_{11}$< -10 dB) of 3.7 % and the radiation efficiency of 80 % at the operating frequency. Finally we confirmed the readable range of the tag antenna by measurement and it shows about 5.3 m in free space and 5.5 m on the target object.

• Ocean Science Journal
• /
• v.42 no.4
• /
• pp.211-222
• /
• 2007

We compare insolation results calculated from two well-known empirical formulas (Socket and Beaudry's SB73 formula and the original Smithsonian (SMS) formula) and a radiative transfer model using input data predicted from meteorological weather-forecast models, and review the accuracy of each method. Comparison of annual mean daily irradiance values for clear-sky conditions between the two formulas shows that, relative to the SMS, the SB73 underestimates spring values by 9 W $m^{-2}$ in the northern Adriatic Sea, although overall there is a good agreement between the annual results calculated with the two formulas. We also elucidate the effect on SMS of changing the 'Sun-Earth distance factor (f)', a parameter which is commonly assumed to be constant in the oceanographic context. Results show that the mean daily solar radiation for clear-sky conditions in the northern Adriatic Sea can be reduced as much as 12 W $m^{-2}$ during summer due to a decrease in the f value. Lastly, surface irradiance values calculated from a simple radiative transfer model (GM02) for clear-sky conditions are compared to those from SB73 and SMS. Comparison with iu situ data in the northern Adriatic Sea shows that the GM02 estimate gives more realistic surface irradiance values than SMS, particularly during summer. Additionally, irradiance values calculated by GM02 using the buoy meteorological fields and ECMWF (The European Centre for Medium Range Weather Forecasts) meteorological data show the suitability of the ECMWF data usage. Through tests of GM02 sensitivity to key regional meteorological factors, we explore the main factors contributing significantly to a reduction in summertime solar irradiance in the Adriatic Sea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2011-2018
• /
• 2011

The paper demonstrates how to deal with the Near-field Acoustic Holography method (NAH) for reducing noise source which is generated in air-conditioning compressor. Sound radiation was measured for both normal compressor and fault compressor. The acoustic noise holograms are predicted by measuring at discrete multiple points around the two compressors and are thereafter reconstructed on the surface of the compressors. 1344 measuring points are used by two microphones in which one is scanning microphone and the other is reference microphone. NAH is a good tool for the visualization of Sound so we can show the source of sound graphically. In this paper, the NAH method found the exact noise source position on the surface of the compressor and the noise-related sub part in the compressor. We found the NAH and is very useful as a noise reduction tool for home-appliance device.

• Atmosphere
• /
• v.27 no.3
• /
• pp.317-329
• /
• 2017

Ocean mixed layer (OML) depth affects diurnal cycle of sea surface temperature (SST) induced by change of solar radiation absorption and heat budget in ocean. The diurnal SST variation can lead to convection over the ocean, which can impact on localized precipitation both over coastal and inland. In this study, we investigate the OML characteristics affecting the diurnal cycle of SST for the Korean Peninsula and surrounding areas. To analyze OML characteristics, HYCOM oceanic mixed layer depth (MLD) and wind field at 10 m from ERA-interim during 2008~2016 are used. In the winter, MLD is deeply formed when the strong wind field is located on perpendicular to continental slope over deep seafloor areas. Besides, cooling SST-induced vertical mixing in OML is reinforced by dry cold air originated from Siberia. The OML in summer is shallowly distributed about 20 m. In order to estimate the impact of OML model in high resolution NWP model, four experimental simulations are performed. At this time, the prognostic scheme of skin SST is applied in NWP to simulate diurnal SST. The simulation results show that CNTL (off-OML) overestimates diurnal cycle of SST, while EXPs (on-OML) indicate similar results to observations. The prediction performance for precipitation of EXPs shows improvement compared with CNTL over coastal as well as inland. This results suggest that the application of the OML model in summer season can contribute to improving the prediction for performance of SST and precipitation over coastal area and inland.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.357-361
• /
• 2009

This study performed analysis on the thermal pattern and current characteristics of an LED ((Light Emitting Diode) street lamp. It did this using a TVS (Thermal Video System) to analyze the LED street lamp's thermal pattern, and measured its characteristics using an oscilloscope. The ambient temperature and humidity during the experiment were maintained at $24{\pm}2[^{\circ}C]$ and 50~60[%]. The capacity of the LED street lamp was 120[W] and nine sets of modules were arranged at uniform intervals. On one module, 24 LED lamps were arranged in a radial pattern. The analysis of the thermal diffusion pattern at the front of the LED lamp showed that the maximum surface temperature was approximately $34[^{\circ}C]$. In addition, there was almost no change in the temperature of the upper cover, and the temperature at the side showed a uniform thermal diffusion pattern. The surface temperature of the converter converting AC to DC increased to approximately $46[^{\circ}C]$. The analysis results of the thermal characteristics of one LED indicated uniform thermal characteristics for an initial eight minutes. However, the temperature at the center of the LED increased to approximately $82[^{\circ}C]$ after 12 minutes had elapsed. It can be seen from this that the temperature at the center of the LED was higher than the allowable temperature, $70[^{\circ}C]$ of the insulating material for general electrical devices. Therefore, it is necessary to design a lamp in such a way that the plastic insulating material does not come into contact with or get close to the LED lamp. The voltage of the LED lamp converted by the AC/DC converter was measured at DC 27[V] and the current was DC 13[A]. Consequently, it can be seen that in order to secure an adequate light source, it is important to supply a stable current that was greater than the current of other light sources. Therefore, appropriate radiation of heat is required to secure the stability and reliability of the system.