• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.440-445
• /
• 2011

Dynamic characteristic analysis is required in developing SMT mounter system with high installation speed and position precision, because of vibration source occurred by positioning head. This paper presents the method of improving dynamic characteristic of SMT(Surface Mount Technology) mounter with finite element method and modal test. The design direction is that natural frequencies of SMT mounter must be higher than the vibration source. In addition, the effect of input shaping on residual vibration reduction is investigated by simulating the response of a first-order system.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.106-113
• /
• 1995

Surface mounters are used to mount the parts of electronic products on PCB(Printed Circuit Board. Those machines rely on high precision, high productivity, and software for accomodation of use. In this paper, two algorithms and a software which can give the users the acco-modation and high productivity for rotary type surface mounters are presented. The algo- rithms for development of of the software consider all factors which affect the effeciency of the operation. And the interface between user and machine for the accomodation of use can be achieved through the developed software.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.573-577
• /
• 2002

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++on Windows NT with easily usable GUI. Using this system, we can automatically measure and inspect the quality of all feeders in production process by analyzing the measurement results statistically.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권2호
• /
• pp.95-99
• /
• 2006

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and to inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++ on Windows with easily usable GUI. Using this system, we can automatically measure and inspect the quality of ail feeders in production process by analyzing the measurement results statistically.

• 한국콘텐츠학회논문지
• /
• 제6권4호
• /
• pp.46-54
• /
• 2006

다수 대의 표면실장기를 포함한 PCB조립라인의 생산성 향상을 위한 방법을 제시한다. PCB조립시간의 단축을 위하여 각 실장기 별로 부품공급 피더의 배치 및 실장순서가 최적화 되어야 하며, 표면실장기들의 라인 밸런스를 위하여 부품 할당이 최적화 되어야 한다. 전체의 최적화 문제를 정수계획문제로 수식화하며, 전향경로문제와 후향경로 문제로 분할하여 구성한다. 클러스터링 알고리즘과 branch-and-bound 알고리즘을 사용하여 전향경로문제의 해를 구하며, 할당 알고리즘과 연결 알고리즘을 사용하여 후향경로 문제의 해를 구한다. 시뮬레이션 결과를 통하여 제안된 방법의 성능을 평가한다.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.79-92
• /
• 1994

Surface mount technology has been evolving in the electronics industries. Efficient operation of surface mounters is closely related with the productivity of the electronic products. In this study, modeling and optimal algorithm for allocating feeders and sequencing mounting jobs in the rotary type surface mounter, which consider all the constraints, in the hardware and are easy to be used in the field, are developed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.48-51
• /
• 1997

This paper presents the algorithm of FIC inspection in chip mounter. When device is mounted on the PCB, it is impossible to get zero defects since there are many problems which can not be predicted. Of these problems, devices with bent corner leads due to mis-handling and which are not placed at a given point measured along the axis are principal problem in SMT(Surface Mounting Technology). In this paper, we proposed a new algorithm based on the Radon transform which uses a projection to inspect the FIC(Flat Integrated Circuit) device and compared this method with other algorithms. We measured the position error and applied this algorithm to our image processing board which is characterized by line scan camera. We compared speed and accuracy in our board.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.98.4-98
• /
• 2001

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens ...

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.716-723
• /
• 2002

Heat transfer in linear motor driven stages for surface mounting device applications was investigated. A simple one-dimensional thermal resistance model (TRM) was introduced. In order to reduce three-dimensional nature to one-dimensional, a few assumptions and simplifications were employed suitably. A good agreement with a finite element heat transfer analysis in temperature profile was obtained. For validation, the analysis was compared with the measurement with respect to motor driving power. Overall discrepancy was less than 7$^{\circ}C$. The influence of two high thermal resistance parts, insulation sheet and thermal contact between the coil assembly and the mounting plate, was examined through the analysis. Additionally, the thermal resistance analysis was applied to another stage including an internal cooling-air passage, and was found available for this system as well. After validation, the cooling effect was surveyed in terms of motor power, and cooling-air and -water flow rate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.96-101
• /
• 2001

Heat transfer in linear motor driven stages for surface mounting device applications was investigated. A simple one-dimensional thermal resistance model was introduced. In order to reduce three-dimensional nature to one-dimensional, a few assumptions and simplifications were employed suitably. A good agreement with a finite element heat transfer analysis in temperature profile was obtained. For validation, the analysis was compared with the measurement with respect to motor driving power. Overall discrepancy was less than $7^{\circ}C$. The influence of two high thermal resistance parts, insulation sheet and thermal contact between the coil assembly and the mounting plate, was examined through the analysis. Additionally, the thermal resistance analysis was applied to another stage including an internal cooling-air passage, and was found available for this system as well. After validation, the cooling effect was surveyed in terms of motor power, and cooling-air flow rate.