References
- McLean, G. W., 1988, 'Review of Recent Progress in Linear Motors,' IEEE Proc. B, Vol. 135, No. 6, pp. 380-416 https://doi.org/10.1049/ip-b.1988.0042
- Widdowson, G. P., Youyoung, L., Gaunekar, A. S. and Srikanth, N., 1998, 'Design of a High Speed Linear Motor Driven Gantry Table,' Proc. PEDES '98 https://doi.org/10.1109/PEDES.1998.1330727
- Basak, A., Filho, E, Nakata, T. and Takahashi, N., 1997, 'Three Dimensional Computation of Force in a Novel Brushless DC Linear Motor,' IEEE Trans. Magn., Vol. 33, No. 2, pp. 69-71 https://doi.org/10.1109/20.582708
- Akmease, R. and Eastham, J. E, 1992, 'Design of Permanent Magnet Flat Linear Motors for Standstill Applications,' IEEE Trans. Magn., Vol. 28, No. 5, pp. 3042-3044 https://doi.org/10.1109/20.179711
- Jung, I., Yoon, S., Shim, J. and Hyun, D., 1997, 'Analysis of Forces in a Short Primary Type and a Short Secondary Type Permanent Magnet Linear Synchronous Motor,' IEEE Int. Electric Machines and Drives Conf. Proc., pp. MCI-8.1-8.3 https://doi.org/10.1109/IEMDC.1997.604157
- Evers, W., Henneberger, G., Wunderlich, H. and Seelig, A., 1998, 'A Linear Homopolar Motor for a Transportation System,' The 2nd Int. Symp. On Linear Drives for Industry Appl., pp. 46-49
- Groning, I., Henneberger, G., Wunderlich, H. and Seelig, A., 1998, 'Optimization of a Magnetic Levitation System for a Linear Drive,' The 2nd Int. Symp. On Linear Drives for Industry Appl., pp. 102-105
- Wang, R. and Gierras, J. F., 1998, 'Performance Calculations for a PM Hybrid Linear Stepping Motor by the Finite Element and Reluctance Network Approach,' The 2nd Int. Symp. On Linear Drives for Industry Appl., pp. 400-403
- Kwon, B., Woo, K., Rhyu, S. and Park, S., 1998, 'Analysis of Direct Thrust Control in Permanent Magnet Type Linear Synchronous Motor by FEM,' The 2nd Int. Symp. On Linear Drives for Industry Appl., pp. 404-407
- Abdou, G. and Tereshkovich, W., 2000, 'Performance Evaluation of a Permanent Magnet Brushless DC Linear Drive for High-Speed Machining Using Finite Element Analysis,' Finite Elements in Analysis and Design, Vol. 35, pp. 169-188 https://doi.org/10.1016/S0168-874X(99)00064-5
- Staton, D. A. and So, E., 1998, 'Determination of Optimal Thermal Parameters for Brushless Permanent Magnet Motor Design,' 33nd IAS Annual Meeting, Vol. 1, pp. 41-49 https://doi.org/10.1109/IAS.1998.732257
- Ishizuka, M., Hayama, S. and Iwasaki, H., 2000, 'Application of a Semi-Empirical Approach to the Thermal design of Electronic Equipment,'ITHERM 2000, pp. 99-106 https://doi.org/10.1109/ITHERM.2000.866814
- Refai-Ahmed, G. and Basit, S., 2000, 'Thermal Characrization of Point of Used Power Supply,' ITHERM 2000, pp. 372-377 https://doi.org/10.1109/ITHERM.2000.866217
- 장창수, 김종영, 김영준, 오정석, 2001, '칩 마운터용 리니어 모터의 열전달 해석,' 2001 춘계기계학회 논문집, Vol. D, pp. 396-401