• 제목/요약/키워드: surface methodology

검색결과 1,972건 처리시간 0.039초

건조키위 제조를 위한 삼투건조공정의 최적화 (Optimization for the Process of Osmotic Dehydration for the Manufacturing of Dried Kiwifruit)

  • 홍주헌;윤광섭;최용희
    • 한국식품과학회지
    • /
    • 제30권2호
    • /
    • pp.348-355
    • /
    • 1998
  • 건조키위의 제조시 건조에 의한 품질열화를 줄이기 위한 전처리공정으로서 삼투공정을 행하여 부분실시 계획법으로 실험계획을 수립한 후 반응표면분석법으로 최적화를 수행하여 최적조건을 얻고자 하였다. 삼투건조시 침지온도와 당농도 그리고 침지시간을 독립 변수로 하고 수분함량, solid gain, weight reduction, moisture loss, 적정산도, 당도, vitamin C를 반응변수로 하였다. 삼투건조 시 물질이동의 특성은 침지온도, 농도, 시간이 길어질수록 증가하는 것으로 나타났으며, 수분함량은 침지온도, 농도, 시간이 증가할수록 낮은 값을 보였고 당도는 침지온도와 농도 및 시간이 증가함에 따라 증가하였다. 적정산도와 vitamin C는 낮은 온도와 고농도의 처리에서 당의 보호작용으로 손실이 적게 나타났다. 수립된 회귀모형에 대한 적합성 결여분석 결과 반응변수 모두 유의성이 없어(P>0.05) 수립된 반응표면 모형이 통계적으로 유의하다고 할 수 있었으며 다중회귀분석 결과 일차항은 유의성이 인정되었다. 독립변수의 영향은 온도와 농도보다 유의성이 있었으나 시간에 대해서는 반응변수 모두 유의성이 인정되지 않았다. 독립변수중 가장 영향이 적은 침지시간인 1.5시간으로 고정하고 온도와 농도만을 변수로하여 수분함량을 $66{\sim}69%$로 하고, 당도와 vitamin C함량을 각각 $24^{\circ}Brix,\;23mg%$이상으로 하는 온도와 농도는 $34{\sim}39^{\circ}C,\;52{\sim}58^{\circ}Brix$로 나타나, 건조키위 제조를 위한 삼투처리의 최적조건을 $37^{\circ}C,\;55^{\circ}Brix$, 1.5시간으로 결정할 수 있었다.항균 효소제인 lysozyme을 분리하는데 매우 효과적인 방법이었다.제로 재차 이용할 경우 비드가 일정한 크기를 갖고, 감소한 표면적과 같은 양의 새로운 비드를 첨가한다면 사용된 비드의 재활용 가능성도 있다고 사료되었다.로 제조된 간장의 구수한 맛, 신맛, 짠맛과 종합적 기호도에서 유의차가 있어서 CM-메주로 제조한 간장보다 우수하였다. MCM-메주로 제조된 간장이 성분과 기호도에 있어서도 CM-메주로 제조된 간장보다 우수한 결과를 보였다. 일본인의 우리나라 전통적인 김치에 대한 종합적인 기호도는 염농도 2.03%, 2.63%, 1.07%의 김치 순으로 아주 싱거운 김치는 선호하지 않음을 알 수 있었다.{\;}8%+{\;}CO_2{\;}15%$ 조건이 보다 적합하였다.신증후군 재발을 경험한 응답자가 9명, 백신접종에도 불구 해당 질병 발병을 경험한 접종자가 3명, 생백신 접종 후 백신 균주에 의한 발병을 경험한 접종자가 2명이었다. 결론 : 국내의 소아 신장학 전문가들은 일반 소아에서 권장되는 예방접종 지침과는 다른 수정된 방식에 따른 예방접종을 실시하고 있었으나 아직 질병 경과와 스테로이드 사용에 따른 접종 시기에 다양성을 보이고 있었고, 또한 예방접종 후의 부작용을 경험한 경우도 다수 있었다. 따라서 향후 다수의 소아를 대상으로 한 전향적인 연구를 통하여 소아 신질한 환아에서 추천되는 예방접종 지침을 확립할 필요가 있다고 사료된다. 생리활성효과에 손색없는 것으로 판단되고, 이러한 기능성에 기초하여 chocolate, 음료 등의 식품이나 의약품의 기능성 소재로서의 산업적 응용 가능성이 높은 것으로 사료된다.대장균군이 역시 난각에서 가장 높은 빈도로 분리되었고, 난황(Yolk)에서는 극히 낮은 수준의 세균오염도를 보였다. 다양한 동물종유래 S. aureus

  • PDF

Progress of Composite Fabrication Technologies with the Use of Machinery

  • Choi, Byung-Keun;Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Park, Soo-Jeong;Moon, Kyung-Man;Chung, Won-Jee;Kim, Man-Soo
    • International Journal of Ocean System Engineering
    • /
    • 제2권3호
    • /
    • pp.185-194
    • /
    • 2012
  • A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

열대 태평양 SSTA 패턴 변화에 따른 우리나라 여름철 수문 변동 분석 (Warm Season Hydro-Meteorological Variability in South Korea Due to SSTA Pattern Changes in the Tropical Pacific Ocean Region)

  • 윤선권;김종석;이태삼;문영일
    • 대한토목학회논문집
    • /
    • 제36권1호
    • /
    • pp.49-63
    • /
    • 2016
  • 본 연구는 열대 태평양지역 ENSO (El $Ni{\tilde{n}}o$-Southern Oscillation) 패턴 변화에 따른 우리나라 여름철(June-September, JJAS) 지역 수문변동 영향 분석을 위하여, 우리나라 5대강 113개 중권역의 강수량과 유출량 자료를 대상으로 합성편차 분석(Composit Analysis, CA)과 Student's t-test에 의한 유의성 검정을 실시하였다. 분석 결과, 유역별로 다소 차이는 있으나 전반적으로 WP (Warm-Pool) El $Ni{\tilde{n}}o$ 해에는 평년에 비하여 강수량과 유출량의 증가 특성이 뚜렷이 나타났으며, CT (Cold-Tongue) El $Ni{\tilde{n}}o$ 해에는 주로 감소하는 경향이, La $Ni{\tilde{n}}a$ 해에는 다소 증가 또는 평년 상태를 유지하는 것을 분석되었다. 또한 백분위 기후값 편차의 산포도분석 결과 여름철 강수량의 증가/감소에 따른 유출량 증 감의 선형적 분포특성을 확인할 수 있었으며, 산포도의 중심은 WP El $Ni{\tilde{n}}o$ 해에는 +17.93%, +26.99%, CT El $Ni{\tilde{n}}o$ 해에는 -8.20%, -15.73%, 그리고 La $Ni{\tilde{n}}a$ 해에는 +8.89%, +15.85%로 분석되었다. 본 연구의 결과는 El $Ni{\tilde{n}}o$ La $Ni{\tilde{n}}a$ 등 열대 태평양 지역 기후현상이 뚜렷한 시기의 우리나라 수자원 장기예측의 불확실성을 줄여 주어 유역차원의 안정적인 중 장기 물공급 전망 등 수방정책지원을 위한 참고자료로 활용이 가능할 것이다.

석류추출액의 청징화를 위한 효소처리조건 최적화 (Optimization of Enzyme Treatment Condition for Clarification of Pomegranate Extract)

  • 김성호;김인호;차태양;강복희;이진형;김종명;송경식;송방호;김종국;이진만
    • Applied Biological Chemistry
    • /
    • 제48권3호
    • /
    • pp.240-245
    • /
    • 2005
  • 효소처리조건에 따른 석류추출액의 청징화특성을 조사하기 위하여 효소반응온도($35{\sim}55^{\circ}C$), 시간($30{\sim}70$분) 및 농도($0.02{\sim}0.10%$)를 중심합성계획법에 의한 16개 구간으로 설정하여 탁도, 갈색도, 가용성 고형분 함량, 총당 및 환원당 함량 등을 반응 표면분석법으로 모니터링하였다. 탁도는 주로 효소반응시간에 의하여 영향을 받고 있었으며, 처리온도 $37.99^{\circ}C$, 처리시간 60.90분, 효소농도 0.08%일 때 탁도의 최소값이 0.04(O.D)로 나타났다. 갈색도는 효소농도에 가장 많은 영향을 받는 것으로 나타났으며, 처리온도와 처리시간에 대해서는 거의 영향을 받지 않는 것으로 나타났으며, 총당의 함량은 처리온도, 처리시간, 효소농도에 대해 모두 영향을 받고 있었으며, 처리온도 $39.28^{\circ}C$, 처리시간 42.04분, 효소농도 0.03%일 때 최대값 8.37%을 나타내었다. 환원당 및 고형분 함량의 경우 효소농도에 가장 많은 영향을 받고 있었으며, 환원당은 처리온도 $42.96^{\circ}C$, 처리시간 46.21분, 효소농도 0.02%일 때 최대값 7.22%를 나타내었고, 고형분 함량은 처리온도 $46.91^{\circ}C$, 처리시간 42.13분, 효소농도 0.02%일 때 최대값 8.13%으로 나타났다. 각 변수에 대한 회귀식을 구한 후 탁도 및 갈색도의 최소값에 대한 최적효소처리조건을 superimposing 한 결과 효소처리 조건은 온도 $45{\sim}50^{\circ}C$, 시간 $50{\sim}60$분 및 농도 $0.06{\sim}0.08%$이었다.

미강의 $\gamma$-oryzanol 및 생리활성물질의 에탄올 추출공정 최적화 (Optimization of Ethanol Extraction of $\gamma$-oryzanol and Other Functional Components from Rice Bran)

  • 조인희;최용희
    • 한국식품저장유통학회지
    • /
    • 제17권2호
    • /
    • pp.281-289
    • /
    • 2010
  • 본 연구에서는 미강의 지용성 생리활성 물질인 $\gamma$-oryzanol과 그 모핵인 ferulic acid를 ethanol을 용매로 효율적으로 추출하고자 반응표면분석법을 이용하여 최적 추출 조건을 설정하였다. 중심합성계획법에 따라 추출조건의 독립변수를 시료에 대한 용매비($X_1$), 추출 온도($X_2$), 추출 시간($X_3$)으로 하고 이에 따라 영향을 받는 종속변수로 추출 수율($Y_1$), 총페놀 함량($Y_2$), 전자공여능($Y_3$), 미강의 지용성 생리활성물질인 ferulic acid 함량($Y_4$)과 $\gamma$-oryzanol 함량($Y_5$)을 설정하였다. 추출 수율은 추출조건이 시료에 대한 용매비 22.56 mL/g ($X_1$), 추출 온도 $78.19^{\circ}C$ ($X_2$), 추출 시간 522.15 min ($X_3$)일 때 최대값 42.03%를 나타내었다. 총페놀 함량의 최대값은 90.78 mg GAE/100 g이었으며, 이때의 추출 조건은 시료에 대한 용매비 21.26 mL/g, 추출온도 $94.65^{\circ}C$, 추출시간 567.97 min이었고, 전자공여능은 시료에 대한 용매비 20.20 mL/g, 추출온도 $81.89^{\circ}C$, 추출 시간 701.87 min일 때 최대값 54.72%를 나타내었다. 그리고 ferulic acid 함량의 최대값은 시료에 대한 용매비 5.22 mL/g, 추출 온도 $79.66^{\circ}C$, 추출 시간 575.24 min일 때 210.47 mg/100g이었고 $\gamma$-oryzanol 함량은 시료에 대한 용매비 5.10 mL/g, 추출온도 $81.83^{\circ}C$, 추출시간 587.39 min에서 최대값 660.39 mg/100g를 나타내었다. 실험결과 모든 종속변수들은 시간보다는 시료에 대한 용매비와 추출온도에 영향을 많이 받았다. 특히 미강의 지용성 생리활성물질인 ferulic acid와 $\gamma$-oryzanol은 온도가 약 $80^{\circ}C$보다 높아지면 추출함량이 감소하는데 이는 온도가 높아짐에 따라 추출용매의 증발과 같은 손실때문인 것으로 사료된다. 이들 특성을 모두 만족시키는 최적 추출조건은 시료에 대한 용매비 10.45 mL/g, 추출온도 $80^{\circ}C$, 추출시간 535 min으로 예측되었다. Ethanol 역시 isopropanol 과 같이 hexane의 대체용매로서 미강의 추출 용매로 적합하다고 사료된다.

토양 및 지하수 Investigation 과 Remediation에 대한 현장적용

  • Wallner, Heinz
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 추계학술대회
    • /
    • pp.44-63
    • /
    • 2000
  • Situated close to Heathrow Airport, and adjacent to the M4 and M25 Motorways, the site at Axis Park is considered a prime location for business in the UK. In consequnce two of the UK's major property development companies, MEPC and Redrew Homes sought the expertise of Intergeo to remediate the contaminated former industrial site prior to its development. Industrial use of the twenty-six hectare site, started in 1936, when Hawker Aircraft commence aircraft manufacture. In 1963 the Firestone Tyre and Rubber Company purchased part of the site. Ford commenced vehicle production at the site in the mid-1970's and production was continued by Iveco Ford from 1986 to the plant's decommissioning in 1997. Geologically the site is underlain by sand and gravel, deposited in prehistory by the River Thames, with London Clay at around 6m depth. The level of groundwater fluctuates seasonally at around 2.5m depth, moving slowly southwest towards local streams and watercourses. A phased investigation of the site was undertaken, which culminated in the extensive site investigation undertaken by Intergeo in 1998. In total 50 boreholes, 90 probeholes and 60 trial pits were used to investigate the site and around 4000 solid and 1300 liquid samples were tested in the laboratory for chemical substances. The investigations identified total petroleum hydrocarbons in the soil up to 25, 000mg/kg. Diesel oil, with some lubricating oil were the main components. Volatile organic compounds were identified in the groundwater in excess of 10mg/l. Specific substances included trichloromethane, trichloromethane and tetrachloroethene. Both the oil and volatile compounds were widely spread across the site, The specific substances identified could be traced back to industrial processes used at one or other dates in the sites history Slightly elevated levels of toxic metals and polycyclic aromatic hydrocarbons were also identified locally. Prior to remediation of the site and throughout its progress, extensive liaison with the regulatory authorities and the client's professional representatives was required. In addition to meetings, numerous technical documents detailing methods and health and safety issues were required in order to comply with UK environmental and safety legislation. After initially considering a range of options to undertake remediation, the following three main techniques were selected: ex-situ bioremediation of hydrocarbon contaminated soils, skimming of free floating hydrocarbon product from the water surface at wells and excavations and air stripping of volatile organic compounds from groundwater recovered from wells. The achievements were as follows: 1) 350, 000m3 of soil was excavated and 112, 000m3 of sand and gravel was processed to remove gravel and cobble sized particles; 2) 53, 000m3 of hydrocarbon contaminated soil was bioremediated in windrows ; 3) 7000m3 of groundwater was processed by skimming to remove free floating Product; 4) 196, 000m3 of groundwater was Processed by air stripping to remove volatile organic compounds. Only 1000m3 of soil left the site for disposal in licensed waste facilities Given the costs of disposal in the UK, the selected methods represented a considerable cost saving to the Clients. All other soil was engineered back into the ground to a precise geotechnical specification. The following objective levels were achieved across the site 1) By a Risk Based Corrective Action (RBCA) methodology it was demonstrated that soil with less that 1000mg/kg total petroleum hydrocarbons did not pose a hazard to health or water resources and therefore, could remain insitu; 2) Soils destined for the residential areas of the site were remediated to 250mg/kg total petroleum hydrocarbons; in the industrial areas 500mg/kg was proven acceptable. 3) Hydrocarbons in groundwater were remediated to below the Dutch Intervegtion Level of 0.6mg/1; 4) Volatile organic compounds/BTEX group substances were reduced to below the Dutch Intervention Levels; 5) Polycyclic aromatic hydrocarbons and metals were below Inter-departmental Committee for the Redevelopment of Contaminated Land guideline levels for intended enduse. In order to verify the qualify of the work 1500 chemical test results were submitted for the purpose of validation. Quality assurance checks were undertaken by independent consultants and at an independent laboratory selected by Intergeo. Long term monitoring of water quality was undertaken for a period of one year after remediation work had been completed. Both the regulatory authorities and Clients representatives endorsed the quality of remediation now completed at the site. Subsequent to completion of the remediation work Redrew Homes constructed a prestige housing development. The properties at "Belvedere Place" retailed at premium prices. On the MEPC site the Post Office, amongst others, has located a major sorting office for the London area. Exceptionally high standards of remediation, control and documentation were a requirement for the work undertaken here.aken here.

  • PDF

발효온도 및 소금농도에 따른 배추김치의 발효 특성 (Fermentation Property of Chinese Cabbage Kimchi by Fermentation Temperature and Salt Concentration)

  • 장문정;김명환
    • Applied Biological Chemistry
    • /
    • 제43권1호
    • /
    • pp.7-11
    • /
    • 2000
  • 배추김치의 실제 유통온도조건$(0{\sim}l5^{\circ}C)$과 국제식품규격위원회(CODEX)에 제출된 염농도조건$(1.5{\sim}4.0%)$의 변화에 따른 김치의 발효특성을 반응표면분석법으로 조사하였다. 발효기간이 길어짐에 따라서 김치의 pH는 감소한 반면 산도는 증가하였다. 발효온도가 높아짐에 따라서 pH및 산도의 감소 및 증가 속도가 높아졌으며, $0{\sim}5^{\circ}C$구간에서는 24일이 지난 후에도 최적 pH인 4.2에 도달하지 못한 반면 $5{\sim}15^{\circ}C$구간에서는 $14{\sim}24$일만에 도달하였다. 소금농도가 증가할수록 pH 감소속도는 낮았으며 발효초기보다 발효말기에 효과가 컸다. $0^{\circ}C$에서 24일이 지난 후에도 산도는 $0.35{\sim}0.43%$ 수준이었지만, $15^{\circ}C$에서는 8일만에 적정산도인 0.75%를 넘어섰다. 소금농도 증가에 따른 산도증가의 억제효과는 $15^{\circ}C$보다는 $0^{\circ}C$에서 뚜렷하게 나타났다. 김치의 pH와 산도에 미치는 영향 정도는 발효기간, 발효온도, 소금농도 순서로 나타났다. 이차다항회귀곡선식에서 pH와 산도 모두 높은 적합도$(r^{2}>0.9276)$를 나타내었으며 일차다항회귀가 결정계수를 주도하였다. 적정 가식기간인 산도 $0.40{\sim}0.75%$를 기준으로 2.75%의 소금농도 배추김치의 경우 $15^{\circ}C$, $10^{\circ}C$$5^{\circ}C$에서 각각 4일, 10일 및 18일로 나타났으며, $5^{\circ}C$의 발효 온도에서는 소금농도가 1.50%에서 4.00%로 증가함에 따라 14일에서 19일로 적정 가식기간이 길어졌다.

  • PDF

기계화를 전제로 한 산간경사지답경지정리방안에 관한 연구(II) (A Study on the Methodology of Land-Consolidation Sloping Paddies in land Vallry for the Farm-Mechanization (II))

  • 황은
    • 한국농공학회지
    • /
    • 제24권4호
    • /
    • pp.57-68
    • /
    • 1982
  • The paddy fiels slope located in Kangweon province Hwyongsung gun Gonggeun myon Shinchonri was considerably steep and so it was impossible to economically consolidate the field up to date. But for the porpose of farm mechanization, the field (32. 27ha) was consolidated by the auther under the assitance of the Ministry of Agriculture and Fishery and,;the Administration of Kangweon province. This paddy field consolidation was caused by the treatise on "Land-consolidation methods for farm mechanization in the steep-sloped paddy field", of which the auther is the same. The constrution was carried out from September, 1981 to April, 1982. During the 4esign and construction, some Peculiarities were found and discussed. That is, in design, besides the common condititions for a design, some special conditions were considered and written below; (1) The ranges of field slope in this design were 1/100-1/30. (2) Long sides of the land readjustment blocks must be arranged abreast contour line, and so they make the amount of cutting and banking decreased so as to take the maximum advantage of the configuration of the field. (3) In design, the main principles of dividing blocks were written below; i) First of all, long side of a block should be drawn straight abreast a contour line. ii) Long side of a block should arrange abreast contour line and make its length 100-150m, if not, l)reak the side in order to make a bended rectangle. iii) Length of a short side should be determinded within differences of elevation (0.6 -1. 2m) between the two adjacent blocks toward the normal to a contour line. iv) Length of a short side should be above 15m and the ratio of long and short side should be slso kept 1: (4-6). v) A new field surface leveling was determinded from the elevation which produce the least amount of cuttingand banking within the range of 0.6-1. 2m diffe rences of elevation between the two adjacent blocks. vi) In the course of dividing blocks with the same width along the line which was normal to a contour line, all blocks connot keep their shape in a retangle because of steep slope of the field and so on, and so it was also necessory to make some non-retanglar and small blocks such as a trianglar or trapezoidal shape, which was impossible to use some of farm machinery. But because this non-rectanglar and small blocks were divided, larger and many rectanglar blocks can be divided and construction cost can also be lowered. According to the conditions discussed above, the paddy field consolidation project designed and constructed. And the results of this study were obtained as below; (1) Three-forth of total cost of this paddy field consolidation was not construction cost, and these cost consist of land grading (1/4), road and canal construction cost (1/4) and the other cost (1/4) such as surveying or materials and 56 on. (2) The steeper the land slope, the greater cost was assigned for road and canal construction, and than land grading. (3) Curtailment of the road and canal construction cost depended on simplificating their strutures. (4) In the case of the land slopes were low, the land grading cost was high by 1: 1.4 in comparison with the road and canal construction cost, and conversely when the slops were steep, the road and canal construction cost was high by 1 : 5 in compa- rison with the land grading cost. (5) The densities of irrigation canal, drainage canal and trunk and branch road were 150. Sm/ha, 60. im/ha and 17. 4m/ha respectively. The density of irrigation canal of the area was high by 2 times in comparison with the average one of Kangweon Province, and the others were nearly the same. (6) Most farmers (above 85%) knew the effects of paddy field consolidation. The effects are; 1) Improvement of irrigation 2) Improvement of farm management 3) Improvement of transportarion 4) farm mechanization and 5) grouping of the scattered land. And the more farm modernization was accomplished by these projects, the more farmers wanted to live in their land. (7) In spite of the very steep sloped paddy field, the diminution rate of the net farm land caused by consolidation was 7.7% which was nearly the same as the one of Chulweon plain of Kangweon province. Land grading cost was 971, OOOwon/ha which was rather cheap by 13.2% than the one of Ghulweon plain, and unit construction cost was 5, 341, OOOwon/ha (included soil addition) which was also nearly the same as the one of Chulweon plain and FNFIA (The federation of national farmland improvement association).

  • PDF

파이롯트 규모에서 미강을 이용한 해양미생물 Cellulophaga lytica LBH-14 유래의 cellobiase 생산 (Enhanced Production of Cellobiase by a Marine Bacterium, Cellulophaga lytica LBH-14, in Pilot-Scaled Bioreactor Using Rice Bran)

  • 고와;김형우;이잔홍;이진우
    • 생명과학회지
    • /
    • 제23권4호
    • /
    • pp.542-553
    • /
    • 2013
  • 본 연구의 목적은 통계학적 방법을 사용하여 해양미생물 Cellulophaga lytica LBH-14가 생산하는 cellobiase의 생산조건을 확립하는 것이었다. 이 균주의 생육에 최적인 미강, ammonium chloride 및 배지의 초기 pH는 100.0 g/l, 5.00 g/l 및 7.0이었으나, 이 균주가 생산하는 cellobiase의 생산에 최적인 조건은 각각 91.1 g/l, 9.02 g/l 및 6.6이었다. 이 균주의 생육에 최적인 $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$$(NH_4)_2SO_4$ 등과 같은 배지의 염농도는 각각 6.25, 0.62, 0.28 및 0.73 g/l이었으나, cellobiase 생산에 최적인 염들의 농도는 각각 4.46, 0.36, 0.27 및 0.73 g/l이었다. 또한, 균체의 생육 및 cellobiase의 생산에 최적인 온도는 각각 35 및 $25^{\circ}C$이었다. 플라스크 규모에서 최적화한 조건으로 파이롯트 규모의 생물배양기에서 cellobiase를 생산한 결과, 이 균주가 생산하는 cellobiase의 생산성은 92.3 U/ml이었으며, 이는 최적화하기 전에 비하여 5.4배 향상된 것 이었다. 본 연구를 통하여 쌀 도정공정의 부산물인 미강 및 ammonium chloride를 cellobiase를 생산하는 기질로 개발하였으며 해양 미생물을 사용하여 cellobiase의 생산기간을 7일에서 3일로 단축시켰다. 또한, 본 연구를 통하여 C. lytica LBH-14가 생산하는 cellobiase의 최적 생산조건은 이 균주가 생산하는 CMCase의 최적 생산조건과 다르다는 사실을 확인하였다.

반응표면분석에 의한 쇠고기 야채 쌀죽의 이화학적 및 관능적 특성 변화

  • 이용욱;금준석;은종방
    • 한국식품저장유통학회:학술대회논문집
    • /
    • 한국식품저장유통학회 2003년도 제23차 추계총회 및 국제학술심포지움
    • /
    • pp.167.2-168
    • /
    • 2003
  • 현대 사회는 서구적인 식생활의 변화로 인해 조리가 간편하고 조리 시간이 짧은 즉석식품과 영양 기호식품을 동시에 충족시켜주는 음식에 대한 소비가 늘고 있는 실정이다. 또한 최근 미곡의 공급량에 비해서 소비량이 해마다 감소하여 재고미의 증가를 볼 때, 쌀의 새로운 이용방법 모색이 절실히 요망된다. 따라서 쌀의 소비촉진과 현대사회의 소비형태를 접목시켜서 쇠고기와 야채를 이용한 즉석쌀죽을 개발하고자 하였다. 쇠고기, 야채 및 쌀가루를 이용한 soup mix의 최적 배합비를 설정하기 위하여 제조조건에 따라 다르게 제조한 쇠고기 야채 쌀죽의 이화학적 및 관능적 특성에 미치는 변화를 조사하였다. 이때 야채의 배합비에 따른 이화학적 및 관능적 특성을 모니터링 하고자 반응표면분석법 (response surface methodology, RSM)을 이용하였다. 요인변수(Xn)를 쌀의 양에 대한 버섯의 비율 (X$_1$), 당근의 비율 (X$_2$), 대파의 비율 (X$_3$)로 하여 중심합성계획에 따라 17실험구로 구분하여 조리실험을 실시하였고, 반응변수(Yn)는 soup mix를 이용하여 제조한 쇠고기 야채 쌀죽의 이화학적 특성인 색도의 L*값 (Y$_1$), a*값 (Y$_2$), b*값 (Y$_3$), 점도(Y$_4$), 퍼짐성 (Y$_{5}$), 고형분 함량(Y$_{6}$), PH (Y$_{7}$)으로 하였으며 관능적 특성인 색 (Y$_{8}$), 향 (Y$_{9}$), 점성 (Y$_{10}$), 맛 (Y$_{11}$), 전체적인 기호도 (Y$_{12}$)를 종속변수로 하여 회귀분석에 이용하였다. 회귀분석에 의한 모델식의 예측에는 SAS (statistical analysis system)program을 사용하였으며, 3차원 반응표면 분석법으로 해석하였다. 야채의 배합비에 따라 제조한 쇠고기 야채 쌀죽의 물리적 특성인 색도의 L*, a*, b* 값에 대한 반응표면 회귀식의 $R^2$은 각각 0.6098(p> 0.05), 0.8803 (p <0.05), 0.6781(p> 0.05)로서 b값에 있어서 그 유의성이 5%수준에서 인정되어 b값에 미치는 영향이 크다는 것을 알 수 있었다. L*값은 63-68사이로, a*값은 0.13에서 -0.89사이를 b*값은 2-5값 사이에서 변화하여 제조한 죽의 색이 옅은 황색임을 알 수 있었다. 고형분 함량, 퍼짐성과 pH에 대한 $R^2$은 각각 0.4280, 0.5433과 0.2406임을 볼 때 버섯, 당근, 대파의 비율에 따라 제조한 쇠고기 야채 쌀죽의 고형분 함량, 퍼짐성과 pH는 설정된 범위내에서 그 유의성이 인정되지 않아 큰 영향을 미치지 않음을 알 수 있었다. 관능검사 결과, 색과 향에 대한 반응표면 회귀식의 $R^2$은 각각0.6000과 0.7825이고 P-value는 각각 0.4290과 0.0942로서 5% 수준에서 유의한 상관성이 없음을 확인할 수 있었다. 맛과 점성에 대한 $R^2$은 0.8717과 0.8068이고 P-value는 각각 0.0195 (p <0.05)와 0.0612로서 야채의 배합비에 따라 맛에 있어서 유의확률 5%수준에서 그 유의성이 인정되었으며, 전체적인 기호도에 대한 유의성은 $R^2$이 0.8463이고 P-value는 0.0344 (p <0.05)임을 볼 때, 설정된 범위내에서 야채의 배합비에 따라 제조한 쇠고기 야채 쌀죽의 맛과 기호도에 큰 영향을 미치는 것을 알 수 있었다. 그리고 최대 임계점이 버섯의 첨가량은 0.99%, 당근의 첨가량은 0.97%, 대파의 첨가량은 0.59%에서 최적 반응표면을 나타내었다. 이상의 결과로 볼 때, 야채의 배합비에 따른 맛과 전체적인 기호도에 있어서 그 유의성이 5%수준에서 모두 유의한 상관관계를 보였으며, soup mix 제조시 쌀가루 양에 대한 야채의 최적 배합비는 버섯, 당근, 대파에 있어서 각각 0.99, 0.97과 0.59%임을 알 수 있었다.

  • PDF