• 한국주조공학회지
• /
• 제12권1호
• /
• pp.40-50
• /
• 1992

A computer simulation of mold filling has been performed in order to analyze the fluid flow pattern in a mold cavity since casting defects such as cold shut formation, entrapment of air or gas, and inclusions are closely related to the fluid flow phenomena. The flow of molten metal entering the mold cavity with free surface has been modeled by SMAC(Simplified Marker and Cell) method. Two dimensional analysis was carried out on plate shape castings with two types of gate system. The calculation results were compared with those of water modeling experiments and showed relatively good agreement.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.174-180
• /
• 2002

A virtual reality technology for multipurpose numerical simulation is developed to reproduce and investigate a variety of ocean environmental problems in a 3D-Numerical Wave Tank. The governing equations for solving incompressible fluid motion are Navier-Stokes equation and continuity equation, and the Marker-Density function technique is adopted to implement the fully-nonlinear free-surface kinematic condition. The marine environmental situations, i.e. waves, currents, wind, etc., are reproduced by use of multi-segmented wavemaker on the basis of the so-called "snake-principle". In this paper, some numerical reproduction techniques for regular and irregular waves, multi-directional waves, Bull's-eye wave, wave-current, and solitary wave are presented, and a model test in motion with large amplitude of roll angle is conducted in the developed 3D-NWT, using a overlaid grid system.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.920-922
• /
• 2018

This paper describes a method to classify simple circular artificial markers on surfaces of a box on the back of hand to detect the pose of user's hand for VR/AR applications by using a Leap Motion camera and two IMU sensors. One IMU sensor is located in the box and the other IMU sensor is fixed with the camera. Multi-layer Perceptron (MLP) algorithm is adopted to classify artificial markers on each surface tracked by the camera using IMU sensor data. It is experimented successfully in real-time, 70Hz, under PC environments.

• IMMUNE NETWORK
• /
• 제5권2호
• /
• pp.124-129
• /
• 2005

Background: CM1 (centrocyte/-blast marker 1) is originally defined as a germinal center B cell marker. It is known that CM1 plays a critical role on B cell development in germinal center. In addition, we have found that CM1 is expressed on lymphoma cell lines, such as Raji, Ramos and IM-9. This means that CM1 might be served as a tumor marker as well. In the present study, we examined the expression of CM1 on the surface of the other tumors and the possibility of the development of tumor screening ELISA kit by using CM1. Methods: First, we have examined the expression of CM1 on stomach cancer and hepatoma, which are predominantly (discovered) occurred in Korean, by flow cytometry analysis. After purifying of CM1 antigen from Raji and Ramos, the optimal ELISA condition was determined. And then we compared the level of CM1 between normal individuals and cancer patients by ELISA. To decrease the non-specific binding of anti-CM1 mAb with serum components except CM1 and to enhance the diagnostic accuracy, albumin depletion spin column was used. Results: CM1 was highly expressed on stomach cancer and hepatoma cell lines. In addition, we have also confirmed the increased CM1 expression on cancer patients. The difference of CM1 expression between normal individuals and cancer patients were more clearly observed, after deletion of serum albumin by using albumin depletion spin column. Conclusion: Based on the results from this study, CM1 might be a useful molecule for the early diagnosis of cancer. In addition, further studies for the increase of ELISA sensitivity and appropriate albumin depletion methods should be needed.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 춘계학술발표대회
• /
• pp.38-38
• /
• 2001

Spermatogonial stem cells은 sperrnatogenesis에서 중요한 역할을 하며, 곡세정관의 기저막에 위치하고 있는 것으로 알려져 있다. 그러나, 그 동안 이 세포에 특이하게 발현되는 marker가 거의 알려져 있지 않아 spermatogonial stem cell의 연구에 많은 어려움을 가져왔다. 최근 일반적인 stem cell이 갖는 특성 중, 기저막과 상호작용을 하는 surface protein으로 integrin이 존재한다는 사실을 이용하여, anti-$\alpha$$_{6}$/ 또는 anti-$\beta$$_1$ integrin항체로 germ cell을 선발하여 정소에 이식한 결과, 높은 효율로 이식세포유래의 정자발생이 가능하다는 결과가 보고되었다 (Shinohara et al., 1999). 한편, 항암제의 일종인 busulfan을 마우스에 투여(40mg/kg)한 후 4-5주가 경과하면 세정관의 기저막에 위치하는 spermatogonia를 제외하고 대부분의 생식세포는 소멸한다 본 실험의 목적은 이러한 사실들을 이용하여 spermatogonial stem cell의 특성을 밝히고, 이 생식세포를 보다 간편하고 손쉽게 선발할 수 있는 시스템을 확립하는데 있다. Busulfan처리 후 5주가 경과된 마우스와 정상적인 13주령의 마우스 testis로부터 세포를 분리한 후 FITC-conjugated anti-IgG를 이용한 면역형광법으로 측정.분석한 결과, 형광표식된 세포비율이 대조군과 비교하여 busulfan을 처리한 경우에서 유의적인 증가를 보였다.(17$\pm$3.8%. 0.7$\pm$0.3% busulfan vs control). 또한, IgG와 결합한 단백질이 존재하는 이들 세포들은 곡세정관의 기저막을 따라 위치하며, 단백질과 복합체를 형성한 IgG는 anti-Ig $G_{2a}$와 반응하지 않는다는 사실을 관찰했다. 이러한 IgG 복합체를 형성한 세포들의 특성을 이용하여, IgG와 반응을 하지 않는 것으로 확인된 이차 항체인 an1i-Ig $G_{2}$와 일차 항체인 anti-$\alpha$$_{6}$ 또는 anti-$\beta$$_1$ integrin항체를 이용하여 측정.분석하였다. Busulfan을 처리한 마우스 정소에서 분리한 세포를 다시 laminin으로 코팅된 dish에서 선발.회수해서, anti-lgG, anti-$\alpha$$_{6}$ 또는 anti-$\beta$$_1$ integrin항체로 각각 표식된 세포비율을 비교하였다. Laminin으로부터 선발.회수한 세포에서는 IgG복합체가 $\alpha$$_{6}$ 또 는 $\beta$$_1$integrin과 거의 같은 수준에서 높은 비율로 표식되었다. 결론적으로, busulfan에 의해 유도된 IgG와 결합가능한 단백질은 $\alpha$$_{6}$나 $\beta$$_1$ integrin과 마찬가지로 immunoglobulin G를 이용하여 spermatogonial stem cell의 선발을 가능하게 했다. 따라서, busulfan처리시 IgG는 미분화된 정조세포의 선발을 위한 하나의 marker로서 사용가능함을 시사한다.다.

• Animal Bioscience
• /
• 제37권5호
• /
• pp.929-943
• /
• 2024

Objective: The present study was executed to explore the molecular mechanism of fibroblast growth factor 10 (FGF10) gene in bovine adipogenesis. Methods: The bovine FGF10 gene was overexpressed through Ad-FGF10 or inhibited through siFGF10 and their negative control (NC) in bovine adipocytes, and the multiplicity of infection, transfection efficiency, interference efficiency were evaluated through quantitative real-time polymerase chain reaction, western blotting and fluorescence microscopy. The lipid droplets, triglycerides (TG) content and the expression levels of adipogenic marker genes were measured during preadipocytes differentiation. The differentially expressed genes were explored through deep RNA sequencing. Results: The highest mRNA level was found in omasum, subcutaneous fat, and intramuscular fat. Moreover, the highest mRNA level was found in adipocytes at day 4 of differentiation. The results of red-oil o staining showed that overexpression (Ad-FGF10) of the FGF10 gene significantly (p<0.05) reduced the lipid droplets and TG content, and their down-regulation (siFGF10) increased the measurement of lipid droplets and TG in differentiated bovine adipocytes. Furthermore, the overexpression of the FGF10 gene down regulated the mRNA levels of adipogenic marker genes such as CCAAT enhancer binding protein alpha (C/EBPα), fatty acid binding protein (FABP4), peroxisome proliferator-activated receptor-γ (PPARγ), lipoprotein lipase (LPL), and Fas cell surface death receptor (FAS), similarly, down-regulation of the FGF10 gene enriched the mRNA levels of C/EBPα, PPARγ, FABP4, and LPL genes (p<0.01). Additionally, the protein levels of PPARγ and FABP4 were reduced (p<0.05) in adipocytes infected with Ad-FGF10 gene and enriched in adipocytes transfected with siFGF10. Moreover, a total of 1,774 differentially expressed genes (DEGs) including 157 up regulated and 1,617 down regulated genes were explored in adipocytes infected with Ad-FGF10 or Ad-NC through deep RNA-sequencing. The top Kyoto encyclopedia of genes and genomes pathways regulated through DEGs were the PPAR signaling pathway, cell cycle, base excision repair, DNA replication, apoptosis, and regulation of lipolysis in adipocytes. Conclusion: Therefore, we can conclude that the FGF10 gene is a negative regulator of bovine adipogenesis and could be used as a candidate gene in marker-assisted selection.

• Journal of Microbiology and Biotechnology
• /
• 제22권3호
• /
• pp.283-291
• /
• 2012

Bioremediation efforts often rely on the application of surfactants to enhance hydrocarbon bioavailability. However, synthetic surfactants can sometimes be toxic to degrading microorganisms, thus reducing the clearance rate of the pollutant. Therefore, surfactant-resistant bacteria can be an important tool for bioremediation efforts of hydrophobic pollutants, circumventing the toxicity of synthetic surfactants that often delay microbial bioremediation of these contaminants. In this study, we screened a natural surfactant-rich compartment, the estuarine surface microlayer (SML), for cultivable surfactant-resistant bacteria using selective cultures of sodium dodecyl sulfate (SDS) and cetyl trimethylammonium bromide (CTAB). Resistance to surfactants was evaluated by colony counts in solid media amended with critical micelle concentrations (CMC) of either surfactants, in comparison with non-amended controls. Selective cultures for surfactant-resistant bacteria were prepared in mineral medium also containing CMC concentrations of either CTAB or SDS. The surfactantresistant isolates obtained were tested by PCR for the Pseudomonas genus marker gacA gene and for the naphthalene-dioxygenase-encoding gene ndo. Isolates were also screened for biosurfactant production by the atomized oil assay. A high proportion of culturable bacterioneuston was tolerant to CMC concentrations of SDS or CTAB. The gacA-targeted PCR revealed that 64% of the isolates were Pseudomonads. Biosurfactant production in solid medium was detected in 9.4% of tested isolates, all affiliated with genus Pseudomonas. This study shows that the SML is a potential source of surfactant-resistant and biosurfactant-producing bacteria in which Pseudomonads emerge as a relevant group.

• Journal of Korean Neurosurgical Society
• /
• 제64권6호
• /
• pp.853-863
• /
• 2021

Objective : Biodegradable poly-L-lactic acid (PLLA) with a highly biocompatible surface via tantalum (Ta) ion implantation can be an innovative solution for the problems associated with current biodegradable stents. The purpose of this study is to develop a Taimplanted PLLA stent for clinical use and to investigate its biological performance capabilities. Methods : A series of in vitro and in vivo tests were used to assess the biological performance of bare and Ta-implanted PLLA stents. The re-endothelialization ability and thrombogenicity were examined through in vitro endothelial cell and platelet adhesion tests. An in vivo swine model was used to evaluate the effects of Ta ion implantation on subacute restenosis and thrombosis. Angiographic and histologic evaluations were conducted at one, two and three months post-treatment. Results : The Ta-implanted PLLA stent was successfully fabricated, exhibiting a smooth surface morphology and modified layer integration. After Ta ion implantation, the surface properties were more favorable for rapid endothelialization and for less platelet attachment compared to the bare PLLA stent. In an in vivo animal test, follow-up angiography showed no evidence of in-stent stenosis in either group. In a microscopic histologic examination, luminal thrombus formation was significantly suppressed in the Ta-implanted PLLA stent group according to the 2-month follow-up assessment (21.2% vs. 63.9%, p=0.005). Cells positive for CD 68, a marker for the monocyte lineage, were less frequently identified around the Ta-implanted PLLA stent in the 1-month follow-up assessments. Conclusion : The use of a Ta-implanted PLLA stent appears to promote re-endothelialization and anti-thrombogenicity.

• 한국전문물리치료학회지
• /
• 제26권3호
• /
• pp.99-105
• /
• 2019

Background: Although magnetic resonance imaging is accurate, it is expensive to measure the movement of temporomandibular joint. The three-dimensional (3D) motion analysis system is an inexpensive measurement tool. Objects: This study examined the reliability of quantifying the mouth opening and lateral mandibular shift and differences between individuals with and without temporomandibular disorder (TMD) using the hygienic method of surface markers on the skin with 3D ultrasound-based motion analysis. Methods: This study included 24 subjects (12 with and 12 without TMD). Temporomandibular joint motion during mouth opening was recorded using two surface markers with 3D ultrasound-based motion analysis. An intraclass correlation coefficient [ICC (3,k)] was used to confirm the intrarater reliability of quantifying kinematic temporomandibular joint motion, and an independent t-test was used to evaluate differences in maximal mouth opening and lateral mandibular shift between the two groups. Results: Assessment of mouth opening and lateral mandibular shift showed excellent test-retest reliability with low standard error of measurement. The lateral mandibular shift and opening-lateral mandibular shift ratio were significantly increased in the TMD group during maximum mouth opening (p<.05). However, no significant difference in maximal mouth opening was observed between the groups with and without TMD (p>.05). Conclusion: This hygienic and simple surface marker method can be used to quantify the mouth opening and lateral mandibular shift at the end-range of mouth opening. The TMD group showed an increased lateral mandibular shift movement at the end-range of mouth opening. The lateral mandibular shift movement can be regarded as a symptom in the diagnosis and treatment of TMD.

• 분석과학
• /
• 제32권2호
• /
• pp.48-55
• /
• 2019

The simple and effective analytical method for the quality control of a novel scalp tonic formulation has been developed and optimized in terms of HPLC conditions and sample preparation method, meanwhile, the optimization of preparation condition was using response surface methodology (RSM) based on central composite design (CCD). Oleanolic acid was selected as marker compound because of its bioactivities for alopecia therapy. The developed analytical method and extraction condition were successfully qualified. Coefficient of determination ($r^2$) for the calibration was 0.9997 with a line passing through the origin point in the range of 0.1-100 mg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 17.5 ng/mL and 55.0 ng/mL, respectively. The intra-day and inter-day precision of the method were 0.5-1.4 % and 0.7-1.8 % in relative standard deviation, respectively, while those accuracy were 99.5-100.9 % and 100.0-102.2 %, respectively. The repeatability of oleanolic acid in samples ranged of 0.3-1.9 % based on peak area and 0.3-0.7 % for retention time. Recoveries from samples were 95.0-99.4 % with lower than 1.8 % in relative standard deviation. Overall, the developed analytical method will be used for quality control of this commercial scalp tonic products successfully.