• 한국조경학회지
• /
• 제50권6호
• /
• pp.1-14
• /
• 2022

본 연구는 도시화 과정에서 발생한 도시 열섬현상을 완화하기 위해 도시 내에서 시행할 수 있는 생활권 녹지 조성 방법인 근린공원 조성, 소공원 조성, 주차장 녹화, 가로수 식재, 옥상·벽면 녹화 다섯 가지의 유형에 대해 세부 녹화 시나리오를 설정하여 열환경 개선 효과를 정량적으로 분석하는 것을 목표로 한다. 열환경 개선 효과를 확인하기 위해 미기후 시뮬레이션 프로그램인 ENVI-met 4.4.6v 모델을 활용하였다. 분석 결과, 공원의 식재 밀도가 높아질수록 기온이 낮아졌으나 사람이 느끼는 온열 체감 정도인 열쾌적성 지수 PET는 기온과 정비례하지 않았다. 수목이 증가하며 기온은 감소하였으나 상대습도가 소폭 증가 및 풍속이 다소 감소하였으며, 특히 PET에 많은 영향을 미치는 평균 복사온도가 수목 밀도와 정비례하지 않아 PET 역시 기온과 다른 양상을 보였다. 소공원은 한 개소 조성 후 효과를 확인하였을 때 최대 56m 반경까지 기온 저감 영향을 주었고, 250m 간격으로 세 개소를 추가 조성한 경우 기온 저감 범위가 약 12.5% 증가하였다. 기온과 달리 PET는 식재된 수목 영역 인근만 영향을 미쳐 소공원 조성 후 주변 환경의 열쾌적성은 큰 차이를 보이지 않았다. 지표면 포장을 아스팔트에서 잔디블록으로 변경하거나 옥상 및 벽면녹화 시행 등은 직접적인 일사 차양의 역할을 하지 않으나 기온 저감에 긍정적인 효과를 주었고, PET는 세 유형 모두 조성 전후 유의미한 차이를 보이지 않았다. 가로수는 식재 간격이 좁을수록 더 높은 기온 저감 효과를 보였으나, PET는 수목 밀도와 정비례하지 않았다. 가로수 하부 관목 식재의 경우 기온 저감에는 큰 영향을 주지 않으나 열쾌적성 개선에는 긍정적인 영향을 주었다. 본 연구는 도시 열섬현상 해소를 위한 생활권 녹지 조성 전략을 개괄적으로 제시하고 효율적인 열환경 개선을 위한 세부 전략을 수립하는 데에 활용될 수 있을 것으로 판단된다.

• 해양환경안전학회지
• /
• 제29권2호
• /
• pp.87-97
• /
• 2023

본 연구에서는 울진군 대형산불 발생이 연안해역에 미치는 영향을 파악하기 위하여 울진군 나곡(F-1), 후정(F-2), 봉평(F-3), 공세항(F-C)에서 수질과 함께 해조류의 종조성, 우점종 및 군집 특성을 분기별로 조사하였다. 수질 분석 결과, 산불에 대한 영향을 판단하기 위한 수소이온농도(pH)는 표·저층에서 각각 8.07~8.30과 8.12~8.48 이었다. 본 연구의 pH 값은 동해의 연안 해수에 있는 일반적인 농도 범위에 포함된 값으로 산불로 인한 직접적인 영향으로 볼 수 없었다. 연안 조하대에서 조사한 해조류의 분석 결과, 전 시기에 대한 해조류의 종조성 비율은 홍조류(58.1%) > 대롱편모조류(갈조류, 25.8%) > 녹조류(14.5%) > 현화식물(1.6%) 순이었다. 시기별 해조류의 우점종은 3월과 6월에 나곡(F-1)과 후정(F-2) 해역에서 대롱편모조류(Ochrophyta, 갈조류)의 미역(Undaria pinnatifida)이 가장 우점하였다. 9월과 11월은 봉평(F-3) 해역과 공세항(F-C)에서 각각 홍조류(Rhodophyta)인 우뭇가사리(Gelidium elegans)와 혹돌잎류(Lithophyllum sp.)가 가장 우점하였다. 군집분석에서는 그룹이 계절에 따른 특정 해조류의 출현 유무에 따라 2개(A, B)로 나누어졌다. 우점종은 그룹 A에서 미역, 우뭇가사리, 미끈뼈대그물말, 그룹 B는 주로 혹돌잎류가 출현하였다. 따라서, 연구지역의 해조류 종조성과 군집구조는 전형적인 수온에 따른 계절변화와 함께 대조구와의 유의미한 차이도 보이지 않아서 산불에 의한 영향은 나타나지 않았다.

• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.885-894
• /
• 2006

본 논문의 의도는 하이퍼스펙트럴 영상의 다량의 밴드를 사용하면서도 효율적인 분류기법의 개발에 초점을 두고 있다. 본 연구에서는 하이퍼스펙트럴 영상의 분류에 있어 이론적으로 밴드수가 많아질수록 분류정확도가 높을 것이라 예상되는, 다변량 통계분석기법중의 하나인 정준상관분석을 적용한 분류기법을 제안한다. 그리고 기존의 대표적인 전통적 분류기법인 최대 우도분류 방법과 비교한다. 사용되는 하이퍼스펙트럴 영상은 2001년 9월 2일 취득된 EO1-Hyperion 영상이다. 실험을 위한 밴드수는 LANDSAT TM 영상에서 열밴드를 제외한 나머지 데이터의 파장대와 일치하는 부분을 감안하여 30개 밴드로 선정하였다. 지상실제데이터로서 비교기본도를 채택하였다. 이 비교기본도와 시각적으로 윤곽을 비교하고, 중첩분석하여 정확도를 평가하였다. 최대우도분류의 경우 수역 분류를 제외하고는 전혀 분류기법으로서의 역할을 하지 못하는 것으로 판단되며, 수역의 경우도 큰 호수 외에 작은 호수나 골프장내 연못, 부분적으로 물이 존재하는 작은 영역 등은 전혀 분류하지 못하고 있는 것으로 나타났다. 그러나 정준상관분류결과는 비교기본도와 형태적으로 시각적 비교를 해볼 때 골프장잔디를 거의 명확히 분류해 내고 있으며, 도시역에 대해서도 고속도로의 선형 등을 상당히 잘 분류해내고 있음을 알 수 있다. 또한 수역의 경우도 골프장 연못이나 대학교내 연못, 기타지역의 연못, 웅덩이 등 까지도 잘 분류해내고 있음을 확인할 수 있다. 결과적으로 정준상관분석 알고리즘의 개념상 트레이닝 영역 선정시 시행착오를 겪지 않고도 정확한 분류를 할 수 있었다. 또한 분류항목 중에서 잔디와 그 외 식물을 구분해 내는 능력과 수역을 추출해 내는 능력이 최대우도분류기법에 비해 우수하였다. 이상의 결과로 판단해 볼 때 하이퍼스펙트럴영상에 적용되는 정준상관분류기법은 농작물 작황 예측과 지표수 탐사에 매우 유용하리라 판단되며, 나아가서는 분광적 고해상도 영상인 하이퍼스펙트럴 데이터를 이용한 GIS 데이터베이스 구축에 중요한 역할을 할 수 있을 것으로 기대된다.

• 대한토목학회논문집
• /
• 제29권5A호
• /
• pp.565-575
• /
• 2009

최근, 테러 및 전쟁과 관련된 폭발사고가 빈번히 발생하고 있으며, 특히 도심지에서는 이러한 폭발사고로 인해 인명피해 뿐 아니라 주요 시설물에도 큰 손상이 가해져 제2차, 3차의 피해가 발생하게 된다. 폭발사고에 대하여 인명 및 시설물을 안전하게 보호하기 위해서는 기본적으로 구조물에 가해지는 폭발하중 효과에 대한 이해가 필요하다. 폭발하중은 매우 빠른 시간 내에 콘크리트 구조물에 큰 압력으로 작용하는 하중이므로 변형률 속도와 구조물의 국부적인 손상을 고려하여 동적응답을 평가해야 한다. 일반적으로, 콘크리트는 다른 건설재료에 비해 상대적으로 높은 폭발저항성을 가진 재료이지만, 일반강도 콘크리트는 충격 및 폭발하중에 대하여 충분한 저항성능을 가지지 않는다. 그러므로 방호설계에서는 고에너지 흡수력과 높은 파괴저항성을 지니는 새로운 재료의 개발이 필요하다. 본 논문에서는 최근 활발하게 연구 중인 초고강도 콘크리트(UHSC)와 Reactive Powder Concrete(RPC)에 대한 방폭성능을 평가하고자 한다. UHSC와 RPC는 강도 및 성능향상, 부재의 치수 및 중량 감소, 내진저항성 향상과 같은 장점들로 인해 초고층건물 및 초장대교량에서 사용되어지고 있다. 또한 UHSC와 RPC는 9.11테러와 같은 테러 및 충격하중에 의한 사회주요시설물의 방호설계에 적용할 수 있다. 그러므로 본 연구에서는 폭발하중에 대한 UHSC 및 RPC 구조물의 거동을 파악하기 위하여 $1.0m{\times}1.0m{\times}150mm$의 슬래브 구조물 시편을 제작하여 폭발실험을 수행하였으며, 폭발파의 특성 뿐만 아니라 최대 및 잔류 변위와 철근과 콘크리트 표면에서 변형률을 측정하여 구조물의 거동을 분석하였다. 또한 손상 및 파괴모드를 각 시편별로 측정하였다. 본 실험을 통해 UHSC 및 RPC가 일반강도콘크리트에 비해 폭발저항성이 높은 것으로 분석되었다.

• 헤리티지:역사와 과학
• /
• 제56권3호
• /
• pp.214-232
• /
• 2023

천연기념물 '경산 대구가톨릭대학교 백악기 스트로마톨라이트'는 희소성, 접근성, 보존성 및 규모면에서 매우 우수하여 2009년 12월 천연기념물로 지정되었으나 지정 당시부터 주변 지역의 발굴을 통한 연장선 확인과 그에 따른 보존방안 마련의 필요성이 제기되었다. 이에 문화재청은 2022년 4월부터 12월까지 화석산지 발굴을 통한 산출양상, 퇴적층 특성, 풍화 상태 등의 조사를 실시하여 자연유산적 가치 및 보존·활용 방안을 제시하였다. 지정면적(762m²) 중 노출되어 있는 반구형 스트로마톨라이트(약 30m²)를 중심으로 주변 지역 1,186m²를 발굴한 결과, 기존 스트로마톨라이트 층준을 따라 전체 면적에 걸쳐 연속적으로 분포하며 반구형 스트로마톨라이트들은 동쪽 지역에서 우세하고 서쪽으로 갈수록 반구형 돔의 분포와 크기가 작아지는 경향이 있다. 반면, 판상형 스트로마톨라이트는 동쪽 지역에서는 관찰되지 않고, 서쪽 지역에서만 관찰된다. 이러한 특징은 규모가 있는 호수에서 장기간 성장한 결과로, 판상형 또는 작은 주상형 돔들이 성장을 지속하며 연결되어 커다란 돔으로 성장하고, 이러한 돔들이 층리면에 마치 산호초와 같은 군집을 이루며 분포하게 된 것으로 해석된다. 스트로마톨라이트 층리면에 발달한 소규면 단층과 절리들, 식물 및 지의류의 성장은 풍화를 가속하는 원인이 되고 있으나 공룡 발자국이나 공룡알화석산지에서 진행되는 화학 약품에 의한 보존처리는 스트로마톨라이트 특성상 맞지 않는 방법이며 폐쇄형 보호시설의 설치를 통한 보존이 고려되어야 한다. 이번 발굴로 스트로마톨라이트의 분포, 규모 및 가치는 기존 천연기념물의 지정 당시보다 훨씬 더 크고 높아졌다는 것이 확인되었다. 따라서 매장 문화재(석실묘)의 발견으로 발굴하지 못한 지역의 전문가에 의한 추가 발굴과 천연기념물의 확대지정에 대한 재검토가 요구된다.

• 대한원격탐사학회지
• /
• 제39권6_2호
• /
• pp.1635-1650
• /
• 2023

지구온난화로 인한 해수면온도 상승은 해양 생태계와 해양 생물에 열적 스트레스를 유발하여 해양 종의 생산성과 분포에 심각한 영향을 미친다. 이와 관련하여 최근 우리나라의 수산자원 중 살오징어의 어획량이 지속적으로 감소하고 있다. 본 연구에서는 지속적인 수산자원 관리를 위하여 어장 형성에 영향을 주는 해양환경을 분석하고 천리안해양관측위성 자료를 비롯한 여러 위성자료들을 이용하여 계절별 살오징어 서식지적합 모델을 개발하였다. 해수면온도는 14.11-26.16℃, 해수면높이는 0.56-0.82 m, 엽록소-a 농도는 0.31-1.52 mg m^-3, 일차생산량은 580.96-1574.13 mg C m^-2 day^-1인 범위에서 평균적으로 약 83%의 살오징어가 어획되는 것을 확인하였다. 계절별로 적합지수를 곡선 접합한 후, 네 가지 통계 방법으로 서식지적합지수를 개발하였고 그 중 산술평균을 사용한 모델이 가장 좋은 성능을 보였다. 개발한 통계 모델과 2019년 어획량 자료와 비교하였을 때, 계절별로 다른 해역에 생성되는 어장과 어획량이 높은 곳에 서식지적합지수가 높게 나타나는 것을 확인하여 모델이 잘 개발될 것을 볼 수 있었다. 또한, 살오징어의 어장 형성과 관련이 높은 해수면온도의 뚜렷한 증가 추세를 확인하였으며 앞으로 지속될 해양 온난화에 의해 어장이 변화할 것으로 예상이 된다. 수산자원 관리를 위해서는 꾸준히 모니터링하는 것이 필요하다고 보여진다.

• 한국해양학회지:바다
• /
• 제14권1호
• /
• pp.1-9
• /
• 2009

2007년 8월에 동해에서 처음으로 $^{234}Th/^{238}U$ 비평형(disequilibrium)을 이용하여 유광대에서 심층으로의 입자상 유기탄소 침강플럭스(export flux)를 추정하였다. 입자상 유기탄소 침강플럭스는 $^{234}Th$ 침강 플럭스에 POC/$^{234}Th_p$ 비율을 곱하여 구하였으며, $^{234}Th$ 플럭스는 표층에서 수심 100 m까지 $^{234}Th/^{238}U$ 비평형을 적분하여 계산하였고 POC/$^{234}Th_p$ 비율은 수심 150 m와 200 m에서 채집한 부유물질 시료(입자크기가 0.7 ${\mu}m$이상)에서 측정하였다. 유기탄소 침강플럭스는 14-506 mg C $m^{-2}$ $day^{-1}$의 범위를 나타냈으며, 정점 A2에서 최고값을 보였고 정점 D4에서 최소값을 보였다. 유기탄소 침강플럭스는 유광대에서의 일차생산력과 매우 좋은 상관관계를 나타내었으며, 유기탄소 침강플럭스/일차생산력 비율은 0.29-0.62(평균 0.43)의 범위를 보였고, 연안역에 비해 심해역에서 다소 높은 비율을 나타냈다. 동해에서 관측한 유기탄소 침강플럭스는 전반적으로 대양에서 관측한 값들보다는 높았고 대륙 주변해에서 관측한 값보다 다소 높거나 유사하였다. 동해에서의 침강플럭스/일차생산력 비율은 북해(North Sea)와 척치해(Chukchi Sea)에서 관측한 값들과는 유사하였지만, 라브라도해(Labrador Sea), 바렌츠해(Barents Sea), 리온스만(Gulf of Lions)에서 관측한 값들보다는 월등히 높았다. 따라서 동해는 전세계 해역에서 유광대에서 생성된 유기탄소가 수심 200 m 이하 심층으로 가장 많은 비율로 침강하는 해역들 가운데 하나라고 생각된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국인구학
• /
• 제11권2호
• /
• pp.54-66
• /
• 1988

I. Introduction Since the 1970's drug abuse among young people has increasingly become a social problem in Korea. In the 1980's, drug abuse, especially glue sniffing, has become the cause of many unfortunated incidents resulting in harm to others as well as the abusers themselves. Taking into consideration of the seriousness of this problem, the Republic of Korea National Red Cross initiated a nation-wide research programme, to understand the present situation and to raise the level of public awareness. The goal of this research was to begin a nation - wide campaign against drug abuse. The research team was composed of the Advisary Committee members and the staff of the Youth Department of the Republic of Korea National Red Cross. The data were collected in February 1988 with the collaboration of the staff and volunteers in the local Chapters. The respondents were allocated nation-wide by the quota sampling method. The questionnaires were distributed to the respondents in three groups :2, 700 to junior and senior high school students, 605 to working youths, and 916 to delinquent youths. A total of 4, 221 questionnaires were collected. II. Characteristics of the Respondents The respondents in each group were selected evenly from rural and urban areas. The general characteristics of the respondents can be described as follow: in case of students, the proportions between male and female respondents, and between senior high school and junior high school students were almost evenly distributed. In case of working youths, the proportion of females (80.5%) was higher than those of the students and the delinquents groups. Delinquent youths were defined as those currently being under custody of the centers for juvenile delinquents. Of this number, 38.8% and 68.2% were junior and senior high school drop-outs respectively. The majority of them (92.6%) were male. As for the family background of the respondents, the proportion of those residing in poverty - stricken areas, and the proportion of those from broken families were higher in case of working youths and delinquent youths than those in case of students. III. Present Patterns of Drug Abuse The following summarizes the presents of drug abuse, as tabulated from the results of the survey. 1. Smoking The percentage of youths who smoke was 36% in the student group, 32% m the working youths group, and 94.4% in the delinquent youths group. 2. Alcohol 50.3% of students, 71.6% of working youths, and 93.3% of delinquent youths has experienced drinking alcohol beverages. 3. Tonic: non - alcoholic, caffeinated beverages popular in Korea and Japan The percentage of those who have used tonic at least once was over 90% in all of the three groups. 4. Sedative About 70% of each group has used sedative with the proportion of working youths use higher than those in other groups. 5. Stimulants Those who have used stimulants comprised around 15% in each group. 6. Tranquilizers Somewhat less than 5% of students and working youths, and 28% of delinquent youths, have used tranquilizers. 7. Hypnotics The users of hypnotics amounted to 0.4% of students, 2.6% of working youths and 7.1% of delinquent youths. 8. Marihuana Those who have used marihuana indicated 0.7% of students, 0.8% of working youths, and 13% of delinquent youths. 9. Glue-sniffing The percentage of glue-sniffing was 3.7%, 5% in the students group and in the youths group respectively, but the proportion was unusually high, at 40.7% in the delinquent youths group. From the results of the survey the present situation of drug abuse in Korea can be summarized as follows: 1. A high percentage of Korean youths have experienced smoking cigarettes and drinking alcoholic beverages. 2. Tonics (non - alcoholic, caffeinated beverages), antipyretic analgesics and stimulants quite regularly used. 3. Tranquilizers, hypnotics, marihuana and glue-sniffing are more widely used among delinquent youths than the other youths. From this fact, there exists a correlation between drug abuse and juvenile delinquency. IV. Time-series Analysis of the First Experience of Drug Abuse and Deviant Behaviour The respoundents were asked when they were first exposed to drugs and when they committed deviant acts. By calculating the average age of each experience, the following pattern was found (See Figure 1). Youths are first exposed to drugs by abuse of tonic(non - alcoholic, caffeinated beverages). At the age of 13, they amoke cigarettes, the use of antipyretic analgesics begins at 14 year old, while at the age of 15, they use tranquilizers, and at 16 hynotics. The period of drug abuse which starts from drinking caffeinated beverages and smoking cigarettes and ends in the use of hypnotics takes about three years. During this period, other delinquent behaviours begin to surface, that is, at the age of 13 when smoking cigarettes begins, the delinquent behaviour pattern starts with truancy. Next, they start taking money from others by using physical force. Prior to the age of 15, they are suspended from school, become hostile to adults, begin running away from home, and start using stimulants and alcohol. Soon they become involved even in glue-sniffing and in the use of marihuana. At the age of 15, they begin to see adult videos and carry weapons. Sexual promiscuity and usage of tranquilizers follows the viewing of adult videos. Consequently, by the time they reach the age of 16, they visit drinking establishments, and are picked up by police for committing delinquent acts. And finally, they come to use hypnotic - type drugs. From the above descriptions, drug abuse can be assumed to have a close correlation with delinquent behaviour. V. Social Factors Related to Drug Abuse As for the Korean youths, glue-sniffing is found to he related to aggressive delinquency, in such cases as run - aways, being picked up by the police, and taking money by force. Smoking cigarettes and drinking alcohol is found to be related to seeing adult videos and visiting drinking establishments. Hypnotics and marihuana were found to be representive of drugs which are related to degenerational delinquency, irrespective of social delinquency. The social factors connected with these drug abuse are as follows: 1. Individual factors Male students were more heavily involved in the usage of drug than females. Youths who do not attend church were more likely to be involved in drugs than those who attend. 2. Family factors The youths who were displeased with their mothers smoking and those who thought their parents did not love each other, or those whose parents had used drugs without prescription, were more likely to he drug users. 3. School factors Those youths who found school life boring, were unsuccessful in their studies, spend most of their time with friends, feel their teachers smoke too much, those who had a positive perception of their teachers smoking were likely to he drug users. To sum up, drug abusers depend on the influence of their parents, teachers and peers. IV. Reasons for Drug Abuse Korean students have mainly used drugs to release stress (42.8%), to stay awake (19.7%), and because of the easy accessibility of drugs( 16.6%). Other reasons are due to their ignorance of the side effects of the drugs (3.6%), natural curiosity (4.2%), and to increase strength(3.O%). From the above facts, the major reasons for drug abuse among Korean youths are to release stress and to stay awake in order to prepare exams. Furthermore, since drugs are readily available, we can conclude that drug abuse is caused by the school system(such as entrance exams) in Korea. VII. Conclusion Drug usage among Korean youths are relatively less common than those of western youths. In some cases, such as, glue-sniffing and use of stimulants, the pattern of drug abuse is found. Moreover, early drug abuse is evident, and it has a close connection with deviant behaviour, resulting in juvenile delinquency. Drug abuse cannot be attributed to any one social factor. Specifically, drug abuse depends on parents, peers, teachers and other members of the community, and also is influenced by social institutions such as the entrance exam system. Every person and organization concerned with youth must participate collectively in restraining drug abuse. Finally, it is suggested that social agencial working for youth welfare should make every effort to tackle this serious problem confronted by the Korean youths today.