• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.65-71
• /
• 2003

The injection concentration of corrosion inhibitor increases under the pH 7, temperature of 2$0^{\circ}C$, and alkalinity of 35 mg/l (as CaCO$_3$), the corrosion rate gradually decreased. When the corrosion inhibitor of 10 mg/l is injected, the corrosion rate for carbon steel pipe, galvanized steel pipe, and copper pipe reduces for 37, 66 and 61 % respectively that it is more efficient on galvanized steel pipe and copper pipe. As a result of examination of corrosion rate at pH 6, 7, and 8 when injecting 10 mg/l of corrosion inhibitor under the conditions of 2$0^{\circ}C$ in water temperature and 35 mg/l (as CaCO$_3$) in alkalinity, the efficiency of the corrosion inhibitor increases as the pH increases. For carbon steel pipe, it does not show much a difference with the change of the pH condition, but galvanized steel pipe and copper pipe clearly show the corrosion rate depending on the change of the pH condition. The efficiency of corrosion inhibitor is low as the concentration of residual chlorine is high, but it does not show a great influence at 0.4 mg/l or less. For each pipe type, in the case of carbon steel pipe, the range of increase of corrosion speed following the residual chloride is higher than the other pipe types. In the meantime, the effect following the residual chlorine in copper pipe is low.

• The Journal of Fisheries Business Administration
• /
• v.36 no.1 s.67
• /
• pp.155-166
• /
• 2005

Since 1980's, fishery household population have been continuously in a down slope with a 5$\%$ annual decreasing rate in Korea. With a particular situation that the scale of over 60s population has been soaring compared with that of under 16 aged population plunging, some difficulties have been raised with the respect of labor supply into fishery communities. This study is aimed at analyzing the tendency of fisheries population with the change of economic development rates and prospect a future fisheries population with the consideration of present decreasing rate. Model results indicate that the tendency of future fishery household population would be decreased by 4.96$\%$ annually through a decade from 2000. Interestingly, it is predicted that the decreasing rate of male fishery household population would be faster than that of female. Consequently, women would hold a greater part in Fishery household population in 2010. In addition, the fishery household population of 40s and 50s would increase from 36$\%$ to 49$\%$, that of over 60s from 21$\%$ to 37$\%$. In conclusion, as a population over 40's encompass almost 90$\%$ in the total population, the fishing communities have a difficulty in shortage of the young workforce.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.7
• /
• pp.549-555
• /
• 2006

In the present study, sterilizing and antibacterial performance tests of Polybutylene pipe with nano-silver were carried out in the testing bench of water supply facilities. Experimental results show that the average sterilizing and antibacterial rate of two micro-biological samples such as E. coli and S. aureus is about 90% in case of stillness experimental condition and 99% in case of flowing experimental condition, when elapsed time is 120 hours and 3 hours, respectively. Experimental results also show that the supply water velocity in nano-silver Polybutylene pipe varies from 1 m/s to 1.5 m/s, the elapsed time needed sterilizing rate reach to 100% decreases.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.10-10
• /
• 2022

The concern about food security is rising as the unstable situation of food supply and demand due to the Covid-19 pandemic, climate change, and turbulent political situation. Korea's global food security index (GFSI), analyzed by the Economist Group, is considered good, but the level continuously decreases in comparing food security levels by country. In particular, Korea is highly dependent on food imports, and food and grain self-sufficiency rates continuously decrease. Therefore, increasing those rates to strengthen food security is urgent. Among the major grains, the self-sufficiency of wheat, com, and soybeans, except rice, is relatively low. Unlike the decrease in the annual rice consumption, the annual wheat consumption has been continuously maintained or increased, which is required public-private efforts to increase the self-sufficiency rate of wheat. Applying the government's policies implemented to increase the self-sufficiency rate of rice in the past will help increase the self-sufficiency rate of wheat. In other words, expanding wheat production and infrastructure, stabilizing supply and demand, and establishing a distribution system can be applied. However, the processing capability of wheat and rice is different, which is necessary to improve wheat quality and processing technology to produce consumer-preferred wheat-based products. The wheat and flour quality can be improved through breeding, cultivation, post-harvest management, and milling. In addition, research on formulation, processes, packaging, and storage to improve the quality of wheat-based products should be done continuously. Overall, food security could be strengthened by expanding wheat production and consumption, improving wheat quality, and increasing wheat self-sufficiency.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.451-458
• /
• 2017

An Electric Vehicle (EV) is operated with the electric energy of a battery in place of conventional fossil fuels. Thus, a suitable charging infrastructure must be provided to expand the use of electric vehicles. Because the battery of an EV must be charged to operate the EV, expanding the number of EVs will have a significant influence on the power supply and demand. Therefore, to maintain the balance of power supply and demand, it is important to be able to predict the numbers of charging EVs and monitor the events that occur in the distribution system. In this paper, we predict the hourly charging rate of electric vehicles using transformation matrix, which can describe all behaviors such as resting, charging, and driving of the EVs. Simulation with transformation matrix in a specific region provides statistical results using the Monte-Carlo Method.

• Journal of Mechanical Science and Technology
• /
• v.14 no.11
• /
• pp.1286-1295
• /
• 2000

The ventilation effectiveness is evaluated as a function of air exchange rate and supply / extract locations in a simplified model chamber using a tracer gas technique of CO$_2$ gas injected into a supply duct. Ventilation systems consist of supply and extract fans, a CO$_2$gas generator, a CO$_2$gas analyzer and a test chamber. The ventilation effectiveness is evaluated using a step-down method based on ASTM Standard E741-83. The room mean age of the model chamber is decreased with increasing air exchange rate fanged from 6to 10 air changes per hour. The ventilation effectiveness of the mechanical inlet/natural extract system is better than that of the mechanical extract system.

• Journal of Biosystems Engineering
• /
• v.23 no.4
• /
• pp.365-372
• /
• 1998

This study was carried out to develop a nutrient-solution mixing-and-supplying system, which used a low-cost metering device instead of expensive metering pumps and a fuzzy logic controller. A low cost and precise overflow-type metering device was developed and evaluated by testing the flow discharge for the automatic nutrient-solution mixing-and-supplying system for snail-scale hydroponic sewers. The fuzzy logic controllers, which could predict and meet the desired values of EC and supply rate of nutrient solution were developed and verified by simulation and experiment. this fuzzy logic controller, whose algorithm consists of four crisp inputs, two crisp outputs and nine rules, was developed to predict the desired value of EC and supply rate of nutrient solution and two crisp inputs, one crisp output and nine rules used to control EC to the desired values. The nutrient-solution mixing-and-supplying system showed satisfactory EC control performance with the maximum overshooting of 0.035 mS/cm and the maximum settling time of 15 minutes in case of increasing 0.7 mS/cm. also, the accuracy of the overflow-type metering device in terms of the full-scale error was 2.29% when using solenoid valve only and 0.2% when using solenoid valve and flow control valve together.

• Korean Journal of Materials Research
• /
• v.16 no.5
• /
• pp.323-328
• /
• 2006

In situ electrical conductivity measurements on $V_2O_5WO_3/TiO_2$ catalysts were carried out at between 100 and $300^{\circ}C$ under pure oxygen, NO and $NH_3$ to investigate the reaction mechanism for ammonia SCR (selective catalytic reduction) de NOX. The electrical conductivity of catalysts changed irregularly with supply of NO. It was, however, found that the electrical conductivity change with ammonia supply was regular and the increase of electrical conductivity was mainly caused by reduction of the labile surface oxygen. The electrical conductivity change of catalysts showed close relationship with the conversion rate of NOx. Variation of conversion rate in atmosphere without gaseous oxygen also showed that labile lattice oxygen is indispensable in the initial stage of the de NOx reaction. These results suggest that liable lattice oxygen acts decisive role in the de NOx mechanism. They also support that de NOx reaction occurs through the Eley?Rideal type mechanism. The amount of labile oxygen can be estimated from the measurement of electrical conductivity change for catalysts with ammonia supply. This suggests that measurement of the change can be used as a measure of the de NOx performance.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.4
• /
• pp.164-169
• /
• 2001

This paper deals with comparison of characteristics of continuous-sheet type low-Tc superconducting (LTS) power supply and discrete-sheet type LTS power supply. These characteristics have been analyzed through experiments. These power supplies consist of two exciters, a rotor, a stator, and a LTS load. A continuous-sheet type has a single continuous niobium (Nb) sheet attached to the inner surface of on the stator. In the case of discrete-sheet type, four separated Nb sheets are used. this experiment is using 1.81 mH LTS magnet load and maximum 30 A dc exciter current. A discrete-sheet type is expected to produce much better pumping rate than a continuous-sheet type. The experimental observations have been compared with the theoretical predictions. In this experiment, the maximum pumping-current has reached about 926 A.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.82-85
• /
• 2000

We introduce pulsed $CO_2$ laser power supply excited by half-wave rectified 60Hz AC discharge some advantage of cost and size compared to a typical pulsed power supply. AC frequency is adjusted from 10Hz to 60Hz to control laser output. In this laser, a low voltage open loop control for high voltage AC discharge circuits is employed to avoid the HV sampling or switching. The control is achieved by using a ZCS circuit and a PIC one-chip microprocessor that control the gate signal of SCR precisely. The pulse repetition rate is limited by 60Hz due to a high leakage inductance. The maximum laser output was obtained about 20W at the condition of total pressure, 18Torr and pulse repetition rate,60Hz.