• Journal of Bio-Environment Control
• /
• v.9 no.4
• /
• pp.212-222
• /
• 2000

This study was performed to investigate the performance of heat recovery device attached to exhaust gas flue connected to combustion chamber of greenhouse heating system. The experimental heat recovery system is mainly consisted of LPG combustion chamber and two heat recovery units; unit-A is attached directly to the exhaust gas flue, and unit-B is connected with unit-A. Heat recovery performance was evaluated by estimating total energy amounts by using enthalpy difference between two measurement points together with mass flow rate of gas and/or air passing through each heat recovery unit depending on 5 different flow rates controlled by voltage meter. The results of this experimental study, such as heat exchange behavior of supply air tubes and exhaust air passages crossing the tubes, pressure drop between inlet and outlet, heat recovery performance of exchange unit, etc., will be used as fundamental data for designing optimum heat recovery device to be used for fuel saving purpose by reducing heat loss amounts mostly wasted outside of greenhouse through flue.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.4
• /
• pp.275-279
• /
• 1977

During the experimental rearing period of common carp in a small simple recirculating aquarium combined with frequent exchanges of water and cleanings, some observations were made on the conditions of fish growing which was directly and instantly affected by the cleaning frequency of strainer, changing rate of water, division and frequency of feed supply, prohibition of excess feeding and the amount of dissolved oxygen. The fish don't seem to be stressed by the manipulation for the change of rearing water, cleaning of detritus in the strainer and filter. It appeared that the most hazzardous matters to fish growth were : 1) supplying feed when fish do not show active response to feed supplied, and 2) giving ample amount of feed at one time. When especially the amount of the feed is within the range fish instantly can swallow, the water clarity is maintained even after feeding operation, but if any excess amount is given the fish intake into mouth much more feed than able to instantly swallow and try to swallow it resulting in much dissolving and suspension of feed materials in water, making the water quite cloudy. Consequently all the water as well as filter bed becomes significantly polluted.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.167-176
• /
• 2020

The automated fish feed system currently used in Korea supplies a certain amounts of feed to water tanks at a certain time. This automated system can reduce the labor cost of managing aqua farms, but it is very difficult to control intelligently and appropriately the amount of expensive feed that is critical to aqua farm productivity. In this paper, we propose the FIIFF Inference Model( Fuzzy Inference-based Intelligent Fish Feeding Model) that can solves the problems of these existing automatic fish feeding devices and maximizes the efficiency of feed supply while properly maintaining the growth rate of fish in aqua farms. The proposed FIIFF inference model has the advantage of being able to control feed amounts appropriately since it computes the amount of feed using the current water environments and fish activity state of the aqua farms. The result of the feed amount yield experiment with the proposed FIIFF Inference Model represents the effect of saving 14.8% over the eight months of actual feed amount in the aqua farm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3261-3266
• /
• 2012

Sodium borohydride($NaBH_4$) known as the material of hydrogen generation and storage can produce the hydrogen via catalytic hydrolysis. This protide chemical could be used in the hydrogen supply system for residential and mobile fuel cells, and thus many researches and developments regarding to these chemicals and decomposition reactions have been implemented. We experimented the hydrolysis of $NaBH_4$ alkaline solution by metal oxide-supported PGM(platinum group metal) catalysts and measured the generation rate of hydrogen which is product of decomposition reaction. We compared oxides as catalyst supports, and the precious metals, Pt and Ru for the catalysts and studied the effects of amounts of catalyst added and $NaBH_4$ concentrations on the hydrogen generation rates and patterns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.552-558
• /
• 2011

In this paper, simulation works for a cascade refrigeration cycle using propane, ethylene and methane as a refrigerant have been performed for the liquefaction of natural gas using Peng-Robinson equation of state built-in PRO/II with PROVISION release 8.3. The natural gas feed compositions were supplied from Korea Gas Corporation and the flow rate was assumed to be 5.0 million tons per annual. Supply temperature for propane refrigerant was fixed as $-40^{\circ}C$, that for ethylene refrigerant as $-95^{\circ}C$, and that for methane refrigerant as $-155^{\circ}C$. Natural gas was finally cooled and liquefied to $-162^{\circ}C$ by Joule-Thomson expansion. Conclusively, 91.64% by mole of the natural gas liquefaction ratio was obtained through a cascade refrigeration cycle and Joule-Thomson expansion.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.38-45
• /
• 2007

A liquid rocket engine fuel-rich gas generator has been developed for the first time in the country, which can produce combustion gas over the rate of 4 kg/s at 900 K and 58 bar. The gas is not only for driving a turbopump but also for providing heat source for propellant supply tanks. The final design of the gas generator had been fixed based on the concept and preliminary development tests, and was validated through structure and heat transfer analysis. The manufacturing involved precision machining, surface finish, and special welding technique. The final assessment on the characteristics of ignition and combustion had been carried out for two different versions of injector heads. This concluded that the present product satisfies the development requirements such as spatial temperature distribution and the development has been successful.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.415-422
• /
• 2008

This study was carried out to investigate the effect of operating and design conditions of gas dispersion type of absorber on $SO_2$ removal efficiency. pH difference between upper and lower part of gas dispersing plate of absorber was 0.2, which was relatively low. This was supposed that recirculation capacity of absorbing liquid between froth zone and reaction zone of absorber be increased by oxidation air injection through liquid riser which acted as liquid pump. Test results showed that $SO_2$ removal efficiency was more sensitive than absorber ${\Delta}P$. High $SO_2$ removal even at lower pH resulted from very low concentration of $HSO_3^-$ ion in absorbing liquid because of direct supply of dissolved oxygen into froth zone. 96% of $SO_2$ removal efficiency was obtained under the condition of absorber pH 5.2, flue gas flow rate of $1,530\;Nm^3/hr$, inlet $SO_2$ concentration of 800 ppm, absorber ${\Delta}P$ of 250mmAq. The following equation by a multiple linear regression was obtained to describe the relationship between $SO_2$ removal and operating variables. $$f=1-{\exp}(-1.3939+1.060pH+0.0139{\Delta}P-0.00267G-0.000064SO_2Conc.),\;R^2=0.9719$$

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.135-146
• /
• 2020

This study was aimed to investigate the possibility of using raw and anaerobically-digested piggery wastewater as culture media for a green microalga Chlorella vulgaris (C. vulgaris). Due to high concentration of ammonia and dark color, the microalga did not grow well in this wastewater. In order to solve this problem, air stripping and NaOCl-treatment were applied to reduce the concentration of NH₃-N and the color intensity from the wastewater. Algal growth was monitored in terms of specific growth rate, biomass productivity, and nutrient removal efficiency. As a result, C. vulgaris grew without any sign of inhibition in air-stripped and 10-folds diluted anaerobically-digested piggery wastewater with enhanced biomass productivity of 0.57 g/L·d and nutrient removal of 98.7-99.8% for NH₃-N and 41.0-62.5% for total phosphorus. However, NaOCl-treatment showed no significant effect on growth of C. vulgaris, although dark color was removed greatly. Interestingly, despite that the soluble organic concentration after air stripping was still high, the biomass productivity was 4.4 times higher than BG-11. Moreover, air stripping was identically effective for raw piggery wastewater as for anaerobic digestate. Therefore, it was concluded that air stripping was a very effective method for culturing microalgae and removing nutrients from raw and anaerobically-digested piggery wastewaters.

• Quality Improvement in Health Care
• /
• v.9 no.1
• /
• pp.6-17
• /
• 2002

Background : This study was conducted to investigate the current situation of medical supply purchasing and stock management at general hospitals having more than 150 beds in Korea and to find methods of effective purchasing and optimal stock management. Methods : Survey was done from staff at the purchasing departments of 229 general hospitals throughout Korea. Data collection was done using a structured questionnaire between January 3 to March 15, 2001. The survey form was returned from 88 hospitals (rate of return: 38.4%). Results : Firstly, 13.6% of the hospitals did not carry the optimal stock of medical supplies, the lead time optimal stock was 3 weeks or longer in 64.4% of the hospitals. Secondly, since 69.8% of the hospitals showed passive attitude toward training on purchasing management and stock management techniques. Thirdly, as for the question on the presence or absence of a deliberation committee for purchasing of new medical supplies, 60% of the hospitals with less than 300 beds did not have one, and 9.4% of the hospitals opened the deliberation committee less than twice a year. Conclusion : At the time of purchasing new medical supplies, purchasing should be done according to the decision by the deliberation committee so that no deduction is made at the time of claiming insurance, and by setting a certain period of time, purchasing of those medical supplies that were not purchased during this period needs to be done according to the decision by the deliberation committee.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6581-6589
• /
• 2013

This study reset the Examination Criteria for Energy Use Plan by the project sector so that the Consultation about Energy Use Plan would play an effective role in reaching the National Energy Policy Issues, and to prevent complaints from the superintendent of the project & agent engaged in the project. To achieve this aim, consultation case analysis was carried out from 2001 to 2010 and the National Energy Master Plan was reviewed. The predicted effect of energy savings calculated by reset Examination Criteria on the $1^{st}$ energy demand target at 2030 was 2.5%, the effect of new and renewable energy utilization on a new and renewable energy supply target at 2030 was 3% and the rate of $CO_2$ reduction to greenhouse gas emission BAU at 2020 was 1.1%.