• 제목/요약/키워드: supplementary materials

검색결과 262건 처리시간 0.022초

Proton Magnetic Resonance Spectroscopic Changes of the Primary Motor Cortex and Supplementary Motor Area in Hemiparetic Patients with Corticospinal Tract Injury due to Deep Intracerebral Hematoma

  • Yang, Dong-Joon;Son, Byung-Chul;Baik, Hyun-Man;Lee, Sang-Won;Sung, Jae-Hoon;Choe, Bo-Young
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2005년도 제30회 춘계학술대회
    • /
    • pp.32-34
    • /
    • 2005
  • Purpose: To investigate the metabolic changes in the motor and motor association cortices following axonal injury in the internal capsule that was caused by deep intracerebral hematoma. Materials and Methods: Using proton magnetic resonance spectroscopy (1H MRS), the authors studied the primary motor cortices (M-1) and supplementary motor areas (SMA) of 9 hemiparetic patients with documentable hemiparesis of varying severity, and we studied 10 normal volunteers as controls. To measure the M-1 and SMA biochemical changes, 4 separate single volumes of interest (VOIs) were located bilaterally in the affected and unaffected hemisphere (AH and UH). Results: 1H MRS provided a neuronal and axonal viability index by measuring levels of N-acetylaspartate (NAA) and creatine/phosphocreatine (Cr). The M-1/SMA NAA/Cr ratios of the AH and UH in patients, and the AH and normal volunteers were compared. The NAA/Cr ratios of the M-1 and SMA in AH, and the SMA in UH were significantly lower than those of normal volunteers. Conclusion: These 1H MRS findings indicate that axonal injury in the descending motor pathway at the level of internal capsule could induce metabolic changes in the higher centers of the motor pathway.

  • PDF

21세기 건강증진과 질병예방 교육과정 개발 - 제5차 대한예방의학회 예방의학 학습목표 개정 방향 - (Curriculum of Health Promotion and Disease Prevention for the 21st Century - The 5th Revision of Preventive Medicine Learning Objectives -)

  • 천병철;조수헌;최보율
    • Journal of Preventive Medicine and Public Health
    • /
    • 제39권4호
    • /
    • pp.293-301
    • /
    • 2006
  • The preventive medicine learning objectives, first developed in 1977 and subsequently supplemented, underwent necessary revision of the contents for the fourth time to create the fifth revision. However, the required educational contents of health promotion and disease prevention have been changed by the new trends of medical education such as PBL and integrated curriculum, the rapid change of the health and medical environment and the globalization of medicine. The Korean Society of Preventive Medicine formed a task force, led by the Undergraduate Education Committee in 2003, which surveyed all the medical colleges to describe the state of preventive medicine education in Korea, analyzed the changing education demand according to the change of health environment and quantitatively measured the validity and usefulness of each learning objective in the previous curriculum. Based on these data, some temporary objectives were formed and promulgated to all the medical schools. After multiple revisions, an almost completely new series of learning objectives for preventive medicine was created. The objectives comprised 4 classifications and 1 supplement: 1) health and disease, 2) epidemiology and its application, 3) environment and health, 4) patient-doctor-society, and supplementary clinical occupational health. The total number of learning objectives, contained within 13 sub-classifications, was 221 (including 35 of supplementary clinical occupational health). Future studies of the learning process and ongoing development of teaching materials according to the new learning objectives should be undertaken with persistence in order to ensure the progress of preventive medicine education.

Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete

  • Sharma, Raju;Bansal, Prem Pal
    • Advances in concrete construction
    • /
    • 제8권1호
    • /
    • pp.21-31
    • /
    • 2019
  • The rich recipe of ultra high performance concrete (UHPC) offers the higher mechanical, durability and dense microstructure property. The variable like cement/sand ratio, amount of supplementary cementitious material, water/binder ratio, amount of fiber etc. alters the UHPC hardened properties to any extent. Therefore, to understand the effects of these variables on the performance of UHPC, inevitably a stage-wise development is required. In the present experimental study, the effect of sand/cement ratio, the addition of finer material (fly ash and quartz powder) and, hybrid fiber on the fresh, compressive and microstructural property of UHPC is evaluated. The experiment is conducted in three phases; the first phase evaluates the flow value and strength attainment of ingredients, the second phase evaluates the efficiency of finer materials (fly ash and quartz powder) to develop the UHPC and the third phase evaluate the effect of hybrid fiber on the flow value and strength of ultra high performance hybrid fiber reinforced concrete (UHP-HFRC). It has been seen that the addition of fly ash improves the flow value and compressive strength of UHPC as compared to quartz powder. Further, the usage of hybrid fiber in fly ash contained matrix decreases the flow value and improves the strength of the UHP-HFRC matrix. The dense interface between matrix and fiber and, a higher amount of calcium silicate hydrate (CSH) in fly ash contained UHP-HFRC is revealed by SEM and XRD respectively. The dense interface (bond between the fiber and the UHPC matrix) and the higher CSH formation are the reason for the improvement in the compressive strength of fly ash based UHP-HFRC. The differential thermal analysis (DTA/TGA) shows the similar type of mass loss pattern, however, the amount of mass loss differs in fly ash and quartz powder contained UHP-HFRC.

초등학교 영재학급용 교수·학습 자료 개발을 위한 가변칠교판 활용 소재 발굴 (Discovery of Materials Using Rotatable Tangram to Develop Teaching and Learning Materials for the Gifted Class)

  • 강민정;송상헌
    • 한국초등수학교육학회지
    • /
    • 제24권1호
    • /
    • pp.169-186
    • /
    • 2020
  • 본 연구는 보통의 초등학생들에게도 익숙한 전통칠교판을 변형하여 만든 가변칠교판을 활용하여 초등학교 영재학급용 교수·학습 자료 개발을 위한 소재 발굴을 목적으로 한다. 가변칠교판은 영재학급 학생들이 수학적 의사소통을 통해 정당화를 수 있다. 다만, 영재학급 학생이라도 초등학교 수준에서는 '기호화' 단계를 거치지 않으면 모든 크기의 삼각형, 직사각형을 찾아 정당화(증명)하기에는 어느 정도의 한계가 있다. 따라서 문자와 기호에 대한 탐구 과정이 필요한 학생들에게는 보충 학습 자료와 추가 발문을 제공할 필요가 있다. 초등학교 영재학급용 교수·학습 자료 개발을 위한 가변칠교판이라는 소재는 영재학급 학생들의 수학적 추론능력과 수학적 의사소통능력을 발달시키는데 기여할 수 있을 것으로 기대한다.

Effect of curing on alkalinity and strength of cement-mortar incorporating palm oil fuel ash

  • Payam Shafigh;Sumra Yousuf;Belal Alsubari;Zainah Ibrahim
    • Advances in concrete construction
    • /
    • 제15권3호
    • /
    • pp.191-202
    • /
    • 2023
  • Palm oil fuel ash (POFA) is a newly emerging pozzolanic material having high amount of silica content. Various forms of POFA were used in cement-based materials (CBMs) in replacement of cement in different dosages of low and high volume. Although, there are many researches on POFA to be used in concrete and mortar, however, this material was not practically used in the construction industry. Engineers and designers need to be confident to use any new developed materials by knowing all engineering properties at short and long terms. As durability concern, concrete pH value is one of the most important properties. Portland cement produces are alkaline initially, however, it may be reduced due to aging and its components. It is believed that by incorporation of supplementary cementitious materials in CBMs the pH value reduces due to utilization of Ca(OH)2 in pozzolanic reaction. This study is the first attempts to understand the pH value of mortars containing up to 30% POFA under different curing conditions and its changes with time. The results were also compared with the pH of ground granulated ballast furnace slag (GGBFS) and fly ash (FA) content mortars. In addition, the compressive strength of different mortars under different curing conditions were also studied. The results showed that the pH value of control mix (without cementitious materials) was more than all the blended cement mortars indifferent curing conditions at the same ages. However, there was a reducing trend in the pH value of all mortar mixes containing POFA.

조선시대 군사 유삼(油衫)의 종류와 운용 체계 (Types and Management System of Military Raincoat, Yusam, of the Joseon Dynasty)

  • 박가영
    • 복식
    • /
    • 제64권7호
    • /
    • pp.143-155
    • /
    • 2014
  • This study focuses on Yusam, a military raincoat that was worn during the Joseon Dynasty. The purpose of this study is to review the types and management system of Yusam. Documentary records, paintings and relics were used as research materials. Yusam was recorded as either Yusam(油衫) or Yu-ui(油衣) in writing. It usually looked like a skirt and was worn like a cape, but there were differences in length. Some of them took the form of a short coat with half-sleeves and side slits. Research analysis results of Silrok, Ilseongrok and the archives of the military camp in the later Joseon are as follows: First, Mokyusam and Jiyusam coexisted as military raincoats. Mokyusam was made with cotton and perilla oil, while Jiyusam was made with traditional Korean paper, a cotton edging and perilla oil. Second, the differences between general Yusam and military Yusam include the material of the clothing, the materials for waterproofing, the color, and the manufacturer. Third, each military camp supplied soldiers with hundreds to thousands of Yusam. Military officers and King's guards wore Mokyusam because Mokyusam was higher than Jiyusam. Fourth, soldiers Yusam together with Yujeongeon, Chorip, Galmo, or Hwihang as a hat. Fifth, the higher the rank, the higher the price of Yusam and the longer the term of usage. On the other hand, as the rank got higher, the cost of the supplementary oil rose, while the duration of usage got shorter.

Re-Birth Design Analysis for Developing Sustainable Fashion Products

  • Lee, Yoon Kyung;DeLong, Marilyn
    • 한국의류학회지
    • /
    • 제40권3호
    • /
    • pp.566-573
    • /
    • 2016
  • Sustainability in fashion cannot ignore fashion attributes required for the design of rapidly changing and innovative products. This study examines "Re-Birth Design" development and provides a means to apply academic and industry perspectives to the investigation of Re-Birth fashion product development. This study defines "Re-Birth Design" as stock that has been designed and launched through distribution channels, subsequently returned unused, then improved and reborn into a new product for redistribution. This study analyzed specific cases. We selected 100 designs for Re-Birth from 11 brands of "K" fashion company in Korea, to be successfully sold in 2014. These cases are used in the analysis and are categorized into design types. As a result of the analysis, "Re-Birth Design" had five levels: Level 1. Changes in supplementary materials such as adding or removing decoration, Level 2. Changes in patterns or materials (changes within the product), Level 3. Partial changes in design (leading to a new design), Level 4. Complete deconstruction and rebirth of the design, and Level 5. Complete deconstruction followed by the use of the design source for a new product that is not a garment. This study analyzed products owned by brands, as well as successful cases of Re-Birth designs that reused existing resources, reduced energy consumption, and increased environmental and economic efficiency by recreating new products that could be resold.

과학 교과서 선정과 평가에 관련된 교사들의 인식조사와 과학 교과서 평가틀 개발에 관한 연구 (The Development of Evaluating Framework for a Science Textbook in a Secondary School)

  • 최경희;김숙진
    • 한국과학교육학회지
    • /
    • 제16권3호
    • /
    • pp.303-313
    • /
    • 1996
  • The major purpose of this thesis is to construct the evaluating framework of a science textbook with a high confidence and universal validity, referring to a preceeding study and materials involved in research work, and in consideration of the educational conditions of the secondary school. The framework developed in this study are composed of 7 categories: content, organization, representation, laboratory, illustrations, external form or editing system, and supplementary materials. Each category consists of detailed items. Eech item in the check-list is to be given between one and five points, and the total number of possible points in this evaluating framework is 290. As a result, these evaluating items enable quantitative analyses, afford an opportunity which we can look into many-sidedly the respects we should consider when a science textbook is adopted, and they can be estimated partly or synthetically as occasional demands. This study is exepected to contribute to choose a good science textbook as fundamental data in the future, and to help the lasting study or estimation of the textbook.

  • PDF

수학 교과에서의 수행과제를 활용한 수업 방안 탐색 -백워드 이론을 기반으로- (An Investigation on the Mathematical Instruction Utilizing Performance Tasks according to the Backward Design)

  • 황혜정;박현주
    • 한국수학교육학회지시리즈A:수학교육
    • /
    • 제55권1호
    • /
    • pp.107-127
    • /
    • 2016
  • The purpose of this study was to explore the possibility of mathematical instruction through performance task activities based on the The Backward Design, which was suggested at first by Wiggins & McTighe in 1998. The Design deals with a performance assessment task involving the whole objective and its entire content of a lesson. Based on the Backward Design, this study established the mathematical instructional materials, which deal with the concept of 'the sector' taught in middle school, with one large performance task including three small tasks. It is important that in the lesson students be guided to achieve the several learning goals by themselves through reasoning activities. For this purpose, a formal interview was carried out by the subject of three middle school mathematics teachers. As a result, in order to implement the instruction utilizing the performance tasks more efficiently in future, it is required that a large performance task should be selected or developed including the content or problem contexts to be relevant with the real-life challenging situations. In addition, to make students enhance reasoning skills, it is strongly requested that the tasks including the utilization of supplementary materials such as technological devices or manipulatives be dealt with in a lesson.

Fabrication of nitrogen doped ordered mesoporous carbon derived from glucosamine with hybrid capacitive behaviors

  • Zhang, Deyi;Han, Mei;Li, Yubing;Wang, Bing;Wang, Yi;Wang, Kunjie;Feng, Huixia
    • Carbon letters
    • /
    • 제23권
    • /
    • pp.9-16
    • /
    • 2017
  • This paper introduces a nitrogen-doped ordered mesoporous carbon (NOMC) derived from glucosamine with hybrid capacitive behaviors, achieved by successfully combining electrical double-layer capacitance with pseudo-capacitance behaviors. The nitrogen doping content of the fabricated NOMC reached 7.4 at% while its specific surface area ($S_{BET}$) and total pore volume reached $778m^2g^{-1}$ and $1.17cm^3g^{-1}$, respectively. A dual mesoporous structure with small mesopores centered at 3.6 nm and large mesopores centered at 9.9 nm was observed. The specific capacitance of the reported materials reached up to $328Fg^{-1}$, which was 2.1 times higher than that of pristine CMK-3. The capacitance retention rate was found to be higher than 87.9% after 1000 charge/discharge cycles. The supplementary pseudocapacitance as well as the enhanced wettability and conductivity due to the incorporation of nitrogen heteroatoms within the carbon matrixes were found to be responsible for the excellent capacitive performance of the reported NOMC materials.