• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.458-466
• /
• 2011

In the mixed system of supercritical carbon dioxide/organic solvents, poly(vinyl alcohol)(PVA) film of high degree of hydrolysis could be dyed with a dichroic dye of C. I. direct black 22(DB22) and as a result, high durability was obtained. Especially, as a dye dispersant in a supercritical fluid phase, a mixed solvent system of ethylene glycol: dimethyl sulfoxide=4 : 6 weight ratio was investigated. Then the optimum pressure for dyeing could be reduced down to 200 bar. Using this supercritical fluid system, the maximum dyeing appeared as the transmittance of less than 1% and the waste amount was reduced to the level of 1/10. After 500% drawing of this PVA film, both the polarizing efficiency of 94% and the single piece transmittance of 30% were obtained. The limitation of DB22 and further improvements were also discussed.

• Journal of Life Science
• /
• v.18 no.2
• /
• pp.213-219
• /
• 2008

Flavonoids in pine needles are known to be effective scavengers of free radical. Especially, proanthocyanidin, a kind of flavonoids possesses cardiovascular protection and antioxidative activities. Here, we evaluated proanthocyanidin contents in total polyphenolic compounds of pine needle extracts prepared by using hot water, ethanol, hexane or sub-supercritical $CO_2$. Analyses of total polyphenolic compounds and proanthocyanidin in each extracts indicated that hot water extract contained the highest concentrations, but sub-supercritical extract contained the lowest concentrations. On the other hand, evaluation of proanthocyanidin contents in total polyphenolic compounds in each extracts showed that sub-supercritical extract possessed the highest content, but hot water extract possessed the lowest content. These results indicate that extracts containing high concentrations of both total polyphenolic compounds and proanthocyanidin could be obtained by using hot water or ethanol extractions. Furthermore, extract containing high content of proanthocyanidin out of total polyphenolic compounds could be achieved by using sub-supercritical extraction. Measurement of antioxidative activities of extracts showed that hot water extract possessed the highest activity. In this study, we prepared extracts from pine needles by four different methods and evaluated the antioxidative compounds in extracts that could be used for effective components of functional food products.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.750-755
• /
• 1996

Citrus juice was treated with supercritical carbon dioxide $(SC-CO_{2})$ and the effect of temperature and pressure on quality of citrus juice was determined. Pectinesterase (PE) was inactivated by $(SC-CO_{2})$ below temperatures necessary for thermal inactivation. There was no significant change in the pH, Brix and total acidity of citrus juice before and after $(SC-CO_{2})$ treatment, but brightness was improved. More ascorbic acid was retained during $(SC-CO_{2})$ treatment of citrus juice than thermal treatment $(93^{\circ}C/0.66\;min)$.During storage of supercritically treated citrus juice at $4^{\circ}C$, activity of PE was reversible. Sensory evaluation showed that color, flavor, taste and overall acceptance of $(SC-CO_{2})$ treated juice were not significantly different from untreated juice. This method offers potentially beneficial processing avenues for citrus juice and other juices, especially in the area of minimally processed products.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.831-840
• /
• 2013

In this study, an attempt is being made to extract surface-active substances from defatted rapeseed cakes by supercritical carbon dioxide fluid. Independent variables for the extraction process, being formulated by D-optimal design, are pressure (150~350 bar), temperature ($33{\sim}65^{\circ}C$ and co-solvent (ethanol, 50~250 g). The dependent variables of the extraction yield, the content of neutral lipids, phospholipids and glycolipids in the extracts were analyzed upon the results through the response surface methodology. As for the extraction yield, it was found to increase with increasing independent variables, among which the co-solvent proved to be a major influencing parameter. Similar trends were found for the content of surface-active substances (i.e, phospholipids and glycolipids) in the extracts, except for the content of neutral lipids. Regression equations were suggested to coincide well with the results from the experiments. Extraction conditions are being optimized to maximize the extraction yields, the content of phospholipids, and glycolipids were 350 bar (pressure), $65^{\circ}C$ (temperature) and 228.55 g (co-solvent), respectively.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.269-270
• /
• 2004

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.387.1-387.1
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.85-86
• /
• 2005

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.564-565
• /
• 2005

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.557-564
• /
• 2015

The previous etching, rinsing and drying processes of wafers for MEMS (microelectromechanical system) using SC-$CO_2$ (supercritical-$CO_2$) consists of two steps. Firstly, MEMS-wafers are etched by organic solvent in a separate etching equipment from the high pressure dryer and then moved to the high pressure dryer to rinse and dry them using SC-$CO_2$. We found that the previous two step process could be applied to etch and dry wafers for MEMS but could not confirm the reproducibility through several experiments. We thought the cause of that was the stiction of structures occurring due to vaporization of the etching solvent during moving MEMS wafer to high pressure dryer after etching it outside. In order to improve the structure stiction problem, we designed a continuous process for etching, rinsing and drying MEMS-wafers using SC-$CO_2$ without moving them. And we also wanted to know relations of states of carbon dioxide (gas, liquid, supercritical fluid) to the structure stiction problem. In the case of using gas carbon dioxide (3 MPa, $25^{\circ}C$) as an etching solvent, we could obtain well-treated MEMS-wafers without stiction and confirm the reproducibility of experimental results. The quantity of rinsing solvent used could be also reduced compared with the previous technology. In the case of using liquid carbon dioxide (3 MPa, $5^{\circ}C$, we could not obtain well-treated MEMS-wafers without stiction due to the phase separation of between liquid carbon dioxide and etching co-solvent(acetone). In the case of using SC-$CO_2$ (7.5 Mpa, $40^{\circ}C$), we had as good results as those of the case using gas-$CO_2$. Besides the processing time was shortened compared with that of the case of using gas-$CO_2$.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.33 no.4
• /
• pp.32-43
• /
• 2020

Objectives : The aim of this study was to investigate the anti-oxidant and anti-aging effect of the seed of Camellia japonica L. extracted by supercritical CO₂. Methods : The cell viability was performed by MTT assay. Nitric oxide (NO) production was performed by NO assay. The anti-oxidant effect was performed by beta-carotene bleaching assay and the intracellular proteome was analyzed expression of each 15 proteins by 2-D electrophoresis. Results : Fatty acid analysis of extract from Camellia japonica L. has shown oleic acid was 84%. And the antioxidant effect was about 186% compared with alpha-tocoperol(0.1%) by beta carotene bleaching assay. In 2D PAGE analysis, fifteen protein changes in five mechanisms which was collagen synthesis pathway, MMPs, ECM-cell interaction, cytokine, antioxidant enzymes were analyzed. Conclusions : On this study extract from seed of Camellia japonica L. by supercritical extraction could be used as a antioxidant and antiaging substance for the skin.