• Journal of Magnetics
• /
• 제15권3호
• /
• pp.108-111
• /
• 2010

Fe50Cr50 metastable alloys were prepared by the mechanical alloying method with milling periods of 1, 2, 4, 6, 12 and 24 hours, respectively. The structural evolution was analyzed by the extended x-ray absorption fine structure (EXAFS). In this work, the EXAFS analysis provided the local structural information around Fe central atom. The saturation magnetization was also measured by VSM. The magnetization decreased as the process mechanical alloying progressed. The magnetic property was related to the local structural variation as a function of processing time. The analysis showed that the diffusion Cr atoms into Fe clusters caused the reduction of magnetization. EXAFS analysis exhibited that the local ordering of magnetic atoms caused the magnetic ordering. Also, EXAFS analysis showed that the long range order of Fe atoms was destroyed completely in 24 hour milling.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.754-760
• /
• 2008

A two-photon induced photoreduction process suggests a possibility for fabricating complicated metallic microstructures which can be applied to 3-D micro-circuits and optical devices, etc. The process employs the photoreduction of silver ions in a metallic solution which is composed of metallic salt ($AgNO_3$) and watersoluble polymer ((poly(4-styrenesulfonique acid) 18wt. % in $H_2O$, $(C_8H_8O_3S)_n$)). In this process, the improvement of the resolution and the uniformity of fabricated metallic structures are important issues. To address these problems, continuous forming window (CFW) is obtained from a parametric study on the conditions of laser power and scanning velocity and the direct seed generation (DSG) method is proposed. Silver nano particles are uniformly generated in a metallic solution through the DSG method, which enables the decrease of a laser power to trigger the photoreduction of silver ions as well as the increase of metal contents in a metallic solution. So the two-photon induced photoreduction property of a metallic solution is improved. Through this work, precise silver patterns are fabricated with a minimum line width of 400 nm.

• 접착 및 계면
• /
• 제9권2호
• /
• pp.1-7
• /
• 2008

생분해성이 있는 polycaprolactone을 사용하여 용액 상태에서 건조시키는 방법으로 마이크로 캡슐을 제조하였다. 심물질로는 화장품 분야에서 중요한 성분으로 쓰이는 retinol을 선택하였으며 안정제로는 poly(vinyl alcohol)을 사용하였다. 제조 조건에 따른 마이크로캡슐의 형태 변화와 물성 변화를 scanning electron microscope와 differential scanning calorimeter를 이용하여 측정하였으며 심물질의 방출 속도에 미치는 영향들을 UV를 이용하여 측정하였다. 사용한 벽재 물질 용액의 농도, 교반속도, 안정제의 농도 등을 변화 시켜 가면서 마이크로캡슐을 제조하여 보았으며, 최적 조건에서 지름이 5~6 um인 구형 모양의 균일한 크기를 갖는 마이크로캡슐들이 형성되었음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.36-38
• /
• 2005

This study is about how to lower the driving voltage that enables to move the micro droplet by the EWOD (Electro Wetting On Dielectric) mechanism. EWOD is well known that it is used ${\mu}-TAS$ digital micro fluidics system. As the device which is fabricated with dielectric layer between electrode and micro droplet is applied voltage, the hydrophobic surface is changed into the hydrophilic surface by electrical property. Therefore, EWOD induces the movement of micro droplet with reducing contact angle of micro droplet. The driving voltage was depended on the dielectric constant of dielectric layer, thus it can be reduced by increase of dielectric constant. Typically, very high voltage ($100V{\sim}$) is used to move the micro droplet. In previous study, we used $Ta_{2}O_{5}$ as the dielectric layer and driving voltage was 23V that reduced 24 percent compared with $SiO_2$. In this study, we used $BZN(Bi_{2}O_{3}ZnO-Nb_{2}O_{5})$ layer which had high dielectric constant. It was operated the just 12V. And micro droplet was moved within Is on 15V. It was reduced the voltage until 35 percents compare with $Ta_{2}O_{5}$ and 50 percents compare with $SiO_2$. The movement of micro droplet within 1s was achieved with BZN (ferroelectrics)just on 15V.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.252-257
• /
• 2011

본 연구에서는 초경량성 마그네슘 재료를 엔진 블록, 실린더 헤드커버 등과 같은 박용기관에 적용하기 위한 환경 친화적 표면처리의 개발에 대하여 고찰하였다. 또한 이온플레이팅법에 의해 마그네슘 박막을 제작하고, 그 제작조건에 따라 변화하는 막의 결정배향성과 몰포로지가 경도특성에 미치는 영향을 해명하고자 하였다. 마그네슘 박막의 경도측정 결과, 아르곤 가스압의 증가에 따라 그 경도값이 상승하였 는데, 그 원인은 결정립계에 의한 강화와 성분 외 가스입자의 흡장효과에 의한 것으로 사료된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.127-132
• /
• 2003

A study of high-pressure n-heptane droplet vaporization is conducted with emphasis placed on equilibrium at vapor-liquid interface. General frame of previous rigorous model[1] is retained but tailored for flash equilibrium calculation of vapor-liquid interfacial thermodynamics. The model is based on complete time-dependent conservation equations with a full account of variable properties and vapor-liquid interfacial thermodynamics. The influences of high-pressure phenomena, including ambient gas solubility, thermodynamic non-ideality, and property variation on the droplet evaporation are investigated. The governing equations and associated moving interfacial boundary conditions are solved numerically using a implicit scheme with the preconditioning method and the dual time integration technique. And a parametric study of entire droplet vaporization history as a function of ambient pressure, temperature has been conducted. Some computational results are compared with Sato's experimental data for the validation of calculations. For low ambient temperatures, the droplet lifetime first increases with pressures, then decreases for high pressures. For higher ambient temperatures, the droplet lifetime increase with less amplitude than that of low ambient temperatures, which then decreases with more amplitude than that of low temperatures. The solubility of nitrogen can not be neglected in the high pressure and it becomes higher as the pressure goes up.

• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.169-174
• /
• 2007

We measured the field profiles, H(x)'s of coated conductors by using scanning Hall probe method when various magnetic fields, $H{_\alpha}'s$ or currents, I's were applied. From the measured field profiles, we calculated the current profiles, J(x)'s by the inversion method. The calculated J(x)'s of coated conductors show some different properties from the standard critical state model. $J{_c}'s$ are inhomogeneous varying with the positions and are not constant when $H_{\alpha}$ or I changes. And when I decreases the features of current reversion are remarkably different from the model.

• 생약학회지
• /
• 제37권1호통권144호
• /
• pp.56-59
• /
• 2006

The vascular relaxant effets of Alpinia officinarum(Zingiberaceae) were evaluated on isolated thoracic aorta from rats. The methanolic extract of rhizome of Alpinia officinarum caused a concentration-dependent relaxation of rat aortic preparations precontracted with $0.3{\mu}M$ phenylephrine, The intensive investigation of the extract by way of activity-guided fractionation led us to yield three kind of active components, galangin(1), kaempferide(2), and kaempferol(3), which were responsible for the vasodilating property of the extract. Stuctures of the isolated active components were established by chemical and spectroscopic means.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.121-121
• /
• 2011

Graphene formed by chemical vapor deposition was exposed to the various plasmas of Ar, O2, N2, and H2 to examine its effects on the bonding properties of graphene to metal. Upon the Ar plasma exposure of patterned graphene, the subsequently deposited metal electrodes remained intact, enabling successful fabrication of field effect transistor (FET) arrays. The effects of enhancing adhesion between graphene and metals were more evident from O2 plasmas than Ar, N2, and H2 plasmas, suggesting that chemical reaction of O radicals induces hydrophilic property of graphene more effectively than chemical reaction of H and N radicals and physical bombardment of Ar ions. From the electrical measurements (drain current vs. gate voltage) of field effect transistors before and after Ar plasma exposure, it was confirmed that the plasma treatment is very effective in controlling bonding properties of graphene to metals accurately without requiring buffer layers.

• 한국통신학회논문지
• /
• 제32권12A호
• /
• pp.1296-1302
• /
• 2007

본 논문에서는 MB-OFDM 시스템에 적합한 낮은 복잡도의 채널 및 주파수 옵셋 결합 추정법을 제안한다. 제안된 기법은 적절한 랭크(rank) 수를 적용함으로써 복잡도를 낮추는 Low-rank LMMSE 채널 추정법을 이용하여 채널을 추정하고, 주파수 옵셋 추정을 위해 추정된 채별의 자기상관특성을 이용하는 간단한 구조를 추가함으로써 낮은 복잡도로 채널과 주파수 옵셋을 결합하여 추정하는 기법이다. 제안된 알고리즘을 IEEE 802.15 TG3a에서 제시한 4가지 UWB 채널 모델에서 모의 실험하여 기존의 LS 채널 추정법을 사용한 알고리즘과 성능을 분석하였고, 복잡도를 낮추기 위해 각 채널 모델 환경에 따라 적절한 수의 랭크 수를 적용하여 결과를 비교하였다.