• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.525-528
• /
• 2003

This paper describes the effective and rigorous analytic method of multipath effect which results from insufficient isolation characteristics between adjacent channels in communication payload system. It is very important to analyze the multipath effect for verifying the performance of transponder subsystem that especially is consist of multi channels. Finally the multipath effect are analyzed by calculating the GR and GDR for two adjacent channels of Ku-band transponder subsystem on the Communication & Broadcasting Satellite(CBS).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.533-533
• /
• 2000

Stabilization of piecewise-linear systems with unknown switching information is presented. The current subsystem is identified from the output, and the identified subsystem is used for the observer-based control. The stability of the overall system is proven and the performance is evaluated via a simulation.

• 가족자원경영과 정책
• /
• 제4권2호
• /
• pp.45-56
• /
• 2000

The purpose of this research was to categorize the type of family financial well-being based on objective and subjective dimension. And this study was intended to explore the relations not only those types and the demographic characteristics but also those types and family subsystem; personal subsystem and managerial subsystem. The results of this study were as follows: 1. The type of family financial well-being were categorized as ‘Adequated type’, ‘Dissatisfying type’, ‘Satisfying type’, and ‘Unadequated type’. 2. The objective variables effect the family financial well-being rather then subjective variables. 3. The family cohesion, adjustment and communication pattern and intentional managing efforts increase the family financial well-being.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.113-118
• /
• 2002

Vibrational characteristics of coupled beam ＆ plate system are considered on simple system, which consists of plates(2-subsystem) and beams(4-subsystem), using experimental statistical energy analysis(ESEA). First, damping and coupling loss factors of the system are determined by power injection method (PIM). Then, energy distribution of all the subsystem is estimated from the power balance equation. Finally, these quantities are compared with measured energy. The correlation of measured and estimated results for the sample problem is reasonably good.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2230-2234
• /
• 2003

This paper proposes a distributed simulator for general control system in CEMTool. Systems can be described by SIMTool likes the simulink in Matlab. For distributed simulation, we can seperate any system into several parallel subsystems in SIMTool. The number of parallel subsystem can be determined by the system's property. After seperation, parallel simulator will do initialization, one-step-ahead simulation, block-distribution and ordering and so on. Finally, simulator will create independent C codes and executive files for each subsystem. The whole system is fulfilled by several PCs, and each PC executes one subsystem. There are communications among these subsystem using reflective memory or ethernet. We have made several experiments, and the 5-stand cold rolling mill control system is our main target. The result of parallel simulation has shown effective speedup in comparison with one pc simulation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.489-492
• /
• 2005

As a former level of MSC(Multi Spectral Camera) telescope of the KOMPSA T2satellite, the several performance tests of EOS(Electro Optical Subsystem) were performed in the EOS level. By these tests, not only the design requirement of payload can be verified but also the test result can be the important criterion to estimate the performance of payload in the launch and space orbit environment. The EOS Geometric Mapping test is to verify the accuracy of the alignment & assembly on the Subsystem of the MSC by measurement like these; LOS(Line of Sight), LOD(Line of Detector), Band to Band Registration, Optical Distortion and Reference Cube. This paper describes the test results and the analysis for the EOS Geometric Mapping.

• 한국항공운항학회지
• /
• 제18권1호
• /
• pp.11-18
• /
• 2010

GNSS(Global Navigation Satellite System) Ground Station performs GNSS signal acquisition and processing. This system generates error correction information and distributes them to GNSS users. GNSS Ground Station consists of sensor station which contains receiver and meteorological sensor, monitoring and control subsystem which monitors and controls sensor station, control center which generates error correction information, and uplink station which transmits correction information to navigation satellites. Monitoring and control subsystem acquires and processes navigation data from sensor station. The processed data is transmitted to GNSS control center. Monitoring and control subsystem consists of data acquisition module, data formatting and archiving module, data error correction module, navigation determination module, independent quality monitoring module, and system maintenance and management module. The independent quality monitoring module inspects navigation signal, data, and measurement. This paper introduces independent quality monitoring and performs the analysis using measurement data.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권7호
• /
• pp.370-377
• /
• 2000

This paper presents a decentralized compensator design procedure for large scale systems. By using a coordinate transformation method, interconnection terms in t도 subsystem are decoupled and a decentralized observer is designed independently as a form of Luenberger-type for each subsystem. And the decentralized compensator which can select the observer and controller gain independently is designed as a form of observer based controller for each subsystem. The proposed method has a simplicity and conciseness in the aspects of the determination of coordinate transformation matrices and the derivation of the separation principle which is adopted independently for each subsystem.

• 농촌계획
• /
• 제7권1호
• /
• pp.15-25
• /
• 2001

This paper described the overall operations and applications of the water environment management and evaluation systems (WEMES) for environmental management, conservation, and evaluation for a small watershed. WEMES was to be applied with field data from small watersheds ranging from 0.4 to 29.79km2 in size which have steep topography and complex landuses. WEMES was a computer aided decision support system, that was comprised of the database subsystem, the simulation model subsystem, the environmental evaluation model subsystem, and the graphic user interface subsystem that visualizes the simulated results. The water environment management and evaluation with WEMES was successfully performed.

• ETRI Journal
• /
• 제27권2호
• /
• pp.140-152
• /
• 2005

In this paper, we present design features, implementation, and validation of a satellite simulator subsystem for the Korea Multi-Purpose Satellite-2 (KOMPSAT-2). The satellite simulator subsystem is implemented on a personal computer to minimize costs and trouble on embedding onboard flight software into the simulator. An object-oriented design methodology is employed to maximize software reusability. Also, instead of a high-cost commercial database, XML is used for the manipulation of spacecraft characteristics data, telecommand, telemetry, and simulation data. The KOMPSAT-2 satellite simulator subsystem is validated by various simulations for autonomous onboard launch and early orbit phase operations, anomaly operation, and science fine mode operation. It is also officially verified by successfully passing various tests such as the satellite simulator subsystem test, mission control element system integration test, interface test, site installation test, and acceptance test.