• Archives of Pharmacal Research
• /
• 제28권7호
• /
• pp.823-828
• /
• 2005

Multidrug resistance (MDR) is one of the most significant obstacles in cancer chemotherapy. One of the mechanisms involved in the development of MDR is the over-expression of P-glycoprotein (P-gp). It is widely known that natural compounds found in vegetables, fruits, plant-derived beverages and herbal dietary supplements not only have anticancer properties, but may also modulate P-gp activity. Therefore, the purpose of this investigation was to examine the effects of naturally occurring products on P-gp function in human breast cancer cell lines, MCF-7 (sensitive) and MCF-7/ADR (resistant). The accumulation of daunomycin (DNM), a P-gp substrate, was greater in the sensitive cells compared to the resistant cells, while the efflux of DNM was higher in the resistant cells compared to the sensitive cells over a period of 2h. The $IC_{50}$ value of DNM in the resistant cells was about 22 times higher than that in the sensitive cells, indicating an over-expression of P-gp in the resistant cells, MCF-7/ADR. All of the compounds tested, with the exception of fisetin, significantly decreased the $IC_{50}$ value of DNM. Biochanin A showed the greatest increase in $[^3H]-DNM$ accumulation, increasing by $454.3{\pm}19.5%$ in the resistant cells, whereas verapamil, the positive control, increased the accumulation by $229.4{\pm}17.6%$. Also, the accumulation of $[^3H]-DNM$ was increased substantially by quercetin and silymarin while it was reduced by fisetin. Moreover, biochanin A, silymarin, and naringenin significantly decreased DNM efflux from MCF-7/ADR cells compared with the control. These results suggest that some flavonoids such as biochanin A and silymarin may reverse MDR by inhibiting the P-gp function.

• 생명과학회지
• /
• 제21권1호
• /
• pp.127-133
• /
• 2011

${\beta}$-galactosidase를 공유결합으로 키토산 담체에 고정화하여 고정화 효소의 특성을 조사하였다. 또한 충진층 반응기에서 연속 조업을 실시하여 공정 최적화를 실시하였다. 키토산 담체에 대한 효소 고정화 효율은 최대 75%을 나타내었다. 고정화 효소에 대한 최적의 pH는 7.0이었고 최적의 온도는 $50^{\circ}C$였다. pH와 온도의 실험 범위에서 고정화 효소가 자유 효소에 비해 넓은 분포를 보여 pH와 온도에 덜 민감하게 작용하였다. 충진층 반응기에서 고정화 효소의 운전에 대한 수학적 모델을 세우고 수치적으로 해를 구하였다. 투입되는 유당의 농도와 유량에 대해서 충진층 반응기의 출구에서 유당의 전환율을 측정하였다. 실험 결과를 경쟁적 저해 효소 반응식과 물질전달 저항을 고려한 수학적 모델의 결과와 비교하였다. 모델의 결과는 실험 결과를 5% 이내의 오차로 잘 예측하였다. 그리고 충진층 반응기의 길이에 따른 유당 전환율과 연속운전 시간에 따른 효소의 비활성화를 고려한 전환율을 모델로부터 예측하였다.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.715-723
• /
• 2006

Perovskite oxide materials are very important for the electronics industry, because they exhibit promising properties. With an interest in the obvious applications, significant effort has been invested in the growth of highly crystalline epitaxial perovskite oxide thin films in our laboratory. And the desired structure of films was formed to achieve excellent properties. $Y_1Ba_2Cu_3O_{7-x}$ (YBCO) superconducting thin films were simultaneously deposited on both sides of 3 inch wafer by inverted cylindrical sputtering. Values of microwave surface resistance R$_2$ (75 K, 145 GHz, 0 T) smaller than 100 m$\Omega$ were reached over the whole area of YBCO thin films by pre-seeded a self-template layer. For implementation of voltage tunable high-quality varactor, A tri-layer structured SrTiO$_3$ (STO) thin films with different tetragonal distortion degree was prepared in order to simultaneously achieve a large relative capacitance change and a small dielectric loss. Highly a-axis textured $Ba_{0.65}Sr_{0.35}TiO_3$ (BST65/35) thin films was grown on Pt/Ti/SiO$_2$/Si substrate for monolithic bolometers by introducing $Ba_{0.65}Sr_{0.35}RuO_3$ (BSR65/35) thin films as buffer layer. With the buffer layer, the leakage current density of BST65/35 thin films were greatly reduced, and the pyroelectric coefficient of $7.6\times10_{-7}$ C $cm^{-2}$ $K^{-1}$ was achieved at 6 V/$\mu$m bias and room temperature.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.27-33
• /
• 2003

Pulsed magnetron sputtering of graphite target was employed for deposition of diamond-like carbon (DLC) films. Time-resolved probe measurements of magnetron discharge plasma have been performed. It was shown that the pulsed magnetron discharge plasma density ($∼10^{17}$ $m^{-3}$ ) is close to that of vacuum arc cathode sputtering of graphite. Raman spectroscopy was sed to examine DLC films produced at low ( $U_{sub}$ / < 1 kV) pulsed bias voltages applied to the substrate. It has been shown that maximum content of diamond-like carbon in the coating (50-60%) is achieved at energy per deposited carbon atom of $E_{c}$ =100 eV. In spite of rather high percentage of $sp^3$-bonded carbon atoms and good scratch-resistance, the films showed poor adhesion because of absence of ion mixing between the film and the substrates. Electric breakdowns occurring during the deposition of the insulating DLC film also thought to decrease its adhesion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1844-1846
• /
• 2005

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR property of self-assembled 4,4- Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment$(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/l$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2V to +2V with 299K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found the NDR voltage of the nitro-benzene is $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ (positive region), respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.215-219
• /
• 2004

Metal-chelate derivatives have been investigated intensively as an emitting layer and recognize to have excellent electroluminescence(EL) properties. We synthesized new luminescent material, 1,4-dihydoxy-5,8-naphtaquinone $Aiq_3$ complex($Al_2Nq_4$) and investigated the electrical optical properties. OLED has potential candidates for information display with merits of thickness, low power and high efficiency. Although the OLED show a lot of advantages for information display, it has the limit of inorganic(metal)/ organic interface. In this study, the two methods are used to study the interface of metal/organic in OLED. First, we treated $O_2$ plasma on an ITO thin film by using RIE system, and analyzed the ingredient of ITO thin film according to change of the processing conditions. We used the RDS and the XPS for the ingredient analysis of the surface and bulk. We measured electrical resistivity using Four-Point-Probe and calculated sheet resistance, and ITO surface roughness was measured by using AFM. We fabricated OLED using substrate that was treated optimum ITO surface. Second, we used the buffer layer of CuPc to improve the characteristics of the interface and the hole injection in OLED. The result of the study for electrical and optical properties by using I V L T System(Flat Panel Display Analysis System), we confirmed that the electrical properties and the luminance properties were improved.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.18-23
• /
• 2016

Injection molded thermoplastic parts may need to be coated to facilitate paint adhesion, or to satisfy other surface property requirements, such as appearance, durability, and weather resistance. In this paper, a two-component polyurethane metering system was developed for the simultaneous injection and surface coating of a plastic substrate. The system was composed of storage tanks, feed pumps, axial piston pumps, mixing head. The tank was designed to be double-jacket structured and fabricated for polyol and isocyanate, respectively. A temperature chamber was used to maintain the material temperature to be $80^{\circ}C$ during flowing from storage tank to mixing head. Inside the chamber, feed pump, low pressure filter, high pressure pump, high pressure filter, pressure sensor, flow meter were installed. A mixing head of L-type was used for homogeneous mixing of polyol and isocyanate. Inside the mixing head, a cartridge heater and a temperature sensor were installed to control the temperature of the materials. The flow rate of axial-piston pump was controlled by using closed-loop feedback control algorithm. The input flow-rates were compared with the measured values. The output error was 6.7% for open-loop control, whereas the error was below 2.2% for closed-loop control. In addition, the pressure generated through mixing-head nozzle increased with increasing flow rate. It was found that the pressure drop between metering pump and mixing-head nozzle was almost 10 bar.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.208-212
• /
• 2013

Dye-sensitized solar cells (DSCs) have taken much attention due to their low cost and easy fabrication method compare to silicon solar cells. But research on cost effective DSC is prerequisite for commercialization. Fluorine doped tin oxide (FTO) which have been commonly used for electrode substrate as electron collector occupied most percentage of manufacturing cost. Therefore we studied FTO-less DSC using sputtered Ti deposited glass as photoelectrode instead of FTO to reduce manufacturing cost. Ti films sputtered on the glass for different time, 5 to 20 minutes with decreasing sheet resistance as deposition time increases. A light source illuminated to counter electrode in order to overcome opaque Ti films. The efficiency of DSC (Ti20) made Ti sputtered glass for 20 min as photoelectrode was 5.87%. There are no significant difference with conventional cell despite lower manufacturing cost.

• KSTLE International Journal
• /
• 제6권2호
• /
• pp.39-44
• /
• 2005

Friction and wear properties of the Boron carbide ($B_{4}C$) coating 100 nm thickness were studied under various relative humidity (RH). The boron carbide film was deposited on silicon substrate by DC magnetron sputtering method using $B_{4}C$ target with a mixture of Ar and methane ($CH_4$) as precursor gas. Friction tests were performed using a reciprocation type friction tester at ambient environment. Steel balls of 3 mm in diameter were used as counter-specimen. The results indicated that relative humidity strongly affected the tribological properties of boron carbide coating. Friction coefficient decreased from 0.42 to 0.09 as the relative humidity increased from $5\%$ to $85\%$. Confocal microscopy was used to observe worn surfaces of the coating and wear scars on steel balls after the tests. It showed that both the coating surface and the ball were significantly worn-out even though boron carbide is much harder than the steel. Moreover, at low humidity ($5\%$) the boron carbide showed poor wear resistance which resulted in the complete removal of coating layer, whereas at the medium and high humidity conditions, it was not. X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) analyses were performed to characterize the chemical composition of the worn surfaces. We suggest that tribochemical reactions occurred during sliding in moisture air to form boric acid on the worn surface of the coating. The boric acid and the tribochemcal layer that formed on steel ball resulted in low friction and wear of boron carbide coating.

• 한국진공학회지
• /
• 제20권3호
• /
• pp.182-188
• /
• 2011

탄소가 없는 폴리실라잔 계와 탄소가 함유된 폴리메틸 실라잔 계 전구체를 실리콘 기판에 스핀코팅하고 $150^{\circ}C$, $400^{\circ}C$, $850^{\circ}C$에서 열처리하여 형성된 박막의 물리적 화학적 특성을 평가하였다. 프리에 변환 적외선 분광, 수축 율, 갭-충진, 식각속도 등을 평가하여 박막형성과 형성된 박막의 물리화학적 특성에 미치는 탄소의 영향을 고찰하였다. 탄소함유 전구체는 (탄소가 없는 전구체보다) $400^{\circ}C$에서 질소, 수소, 탄소의 휘발량이 더 적고 산소 흡수량이 더 적어서 (15.6%)보다 낮은 14.5% 두께 수축을 나타내었으나, $800^{\circ}C$에서는 휘발 량이 더 많고 산소 흡수량도 더 많아져 (19.4%)보다 높은 37.4% 두께 수축을 나타냈다. 프리에 변환 적외선 분광분석결과, 전구체내의 탄소는 Spin-on dielectric (SOD) 박막으로 하여금 Si-O 결합형성을 적게, 박막특성을 불균일하게, 그리고 화학 용액에 더 빨리 식각되도록 만들었다.