• 대한토목학회논문집
• /
• 제31권1D호
• /
• pp.73-82
• /
• 2011

일반적으로 다져진 도로기초 지반재료의 장기적인 강도나 배수 거동 평가시 불포화상태를 고려하지 않고 있다. 그래서 보조기층과 노상토와 같은 도로하부 기초에서의 불포화상태와 이력현상을 고려하는 것은 현실적이다. 따라서 보다 정량적인 불포화 지반의 평가를 위하여 흡수력과 함수특성을 평가하기 위한 적절한 장비, 재료모델, 그리고 투수계수에 대한 평가가 필요하다. 본 논문에서는 이러한 거동을 알아보기 위해서는 흙-수분 관계인 재료의 함수특성곡선 측정 자료를 통하여 불포화 투수계수를 추정하고 이를 통하여 국내 대표적인 입상재료에 대한 불포화상태에서의 수분의 이동에 대한 관찰 및 분석을 수행하였다.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.21-29
• /
• 2012

PURPOSES: This study is to investigate the mechanical performance of the fiber reinforced lean concrete with respect to different types of fibers. METHODS: Increased vehicle weight and other causes from the exposed conditions have accelerated the deteriorations of road pavement. A new multi-functional composite pavement system is being developed recently in order to extend service life and upgrade the pavement. A variety of tests were conducted before and after hardening of the concrete. RESULTS: From the test results, it was found that the use of different types of fibers did not affect the compressive strength development. This might be due to the inherent property of the lean concrete. When steel fibers were used relatively greater flexural strength and flexural fracture toughness were developed. Also addition of fly ash by replacing a part of Portland cement the fracture toughness was slightly increased. CONCLUSIONS: It has been known that the addition of fibers and use of mineral admixture can be positively considered in the development of multi-functional composite pavement system as its required mechanical performance is obtained.

• Advances in Computational Design
• /
• 제3권2호
• /
• pp.201-212
• /
• 2018

Decrease in availability of suitable subbase and base course materials for highway construction leads to a search for economic method of converting locally available troublesome soil to suitable one for highway construction. Present study insights on evaluation of benefits of stabilization of subgrade soils in term of extension in service life (TBR) and layer thickness reduction (LTR). Laboratory investigation consisting of Atterberg limit, Compaction, California Bearing Ratio, unconfined compressive strength and triaxial shear strength tests were carried out on two types of soil for varying percentages of stabilizers. Vertical compressive strains at the top of unstabilized and stabilized subgrade soils were found out by elastoplastic finite element analysis using commercial software ANSYS. The values of vertical compressive strains at the top of unstabilized and stabilized subgrade, were further used to estimate layer thickness reduction or extension in service life of the pavement due to stabilization. Finite element modeling of the flexible pavement layered structure provides modern technology and sophisticated characterization of materials that can be accommodated in the analysis and enhances the reliability for the prediction of pavement response for improved design methodology. If the pavement section is kept same for unstabilized and stabilized subgrade soils, pavement resting on lime, fly ash and fiber stabilized subgrade soil B will have service life 2.84, 1.84 and 1.67 times than that of unstabilized pavement respectively. The flexible pavement resting on stabilized subgrade is beneficial in reducing the construction material. Actual savings would depend on the option exercised by the designer for reducing the thickness of an individual layer.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.11-21
• /
• 2013

PURPOSES: As pavement generally provides service shorter than an expected life cycle, maintenance cost increases gradually. In order to help extending the service life and reduce maintenance cost, a new multi-functional composite pavement system is being developed in Korea. METHODS: This study is a part to develop the multi-functional composite pavement and is to investigate the mechanical performances of fiber-reinforced lean concrete for pavement subbase. The inherent problem of fiber reinforced concrete is dispersion of fibers in concrete mix. This study additionally evaluated fiber dispersion characteristics with respect to different fiber types. RESULTS: From the test results, the compressive strengths of the concretes satisfied the required limit of 5MPa at 7days. The standard deviation of the measured number of fibers were lower in the order of nylon, steel fiber and polypropylene. CONCLUSIONS: Reject ash was shown to be satisfactory as a replacement material to Portland cement in lean concrete base. The fiber volume fraction is suggested to be 0.4% even though the fracture toughness did not vary significantly with respect to fiber types. However, fracture energy absorbed up to complete failure increased with the increased fiber volume fraction increment.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.61-67
• /
• 2016

OBJECTIVES : The objective of this study is to detect road cavities using multi-channel 3D ground penetrating radar (GPR) tests owned by the Seoul Metropolitan Government. METHODS : Ground-penetrating radar tests were conducted on 204 road-cavity test sections, and the GPR signal patterns were analyzed to classify signal shape, amplitude, and phase change. RESULTS : The shapes of the GPR signals of road-cavity sections were circular or ellipsoidal in the plane image of the 3D GPR results. However, in the longitudinal or transverse direction, the signals showed mostly unsymmetrical (or symmetrical in some cases) parabolic shapes. The amplitude of the GPR signals reflected from road cavities was stronger than that from other media. No particular pattern of the amplitude was found because of nonuniform medium and utilities nearby. In many cases where road cavities extended to the bottom of the asphalt concrete layer, the signal phase was reversed. However, no reversed signal was found in subbase, subgrade, or deeper locations. CONCLUSIONS : For detecting road cavities, the results of the GPR signal-pattern analysis can be applied. In general, GPR signals on road cavity-sections had unsymmetrical hyperbolic shape, relatively stronger amplitude, and reversed phase. Owing to the uncertainties of underground materials, utilities, and road cavities, GPR signal interpretation was difficult. To perform quantitative analysis for road cavity detection, additional GPR tests and signal pattern analysis need to be conducted.

• 한국농공학회지
• /
• 제31권2호
• /
• pp.66-81
• /
• 1989

The characteristics of resilient modulus(Mr) which dominates the life of pavement and the design of pavement were investigated on the test specimens which were cement treated and non-treated of the three different soil types. The results are summarized as follows : 1. The resilient modulus was decreased by increasing the cyclic deviator stress ($\sigma$d) , especially the resilient modulus was gradually decreased or sometimes increased when the value of ad was greater than 0.75- 1. 0kg/cm$^2$. 2. The resilient modulus was increased by increasing the homogeneous confined stress ($\sigma$do) and such phenomena were distinct on the coarse soils. 3. The resilient modulus was increased by increasing the ratio of confined stress(Kc), and this phenomena were eminent on the coarse soils too, and the higher permanent strain was showed by increasing the value of Kc. 4. In the drained cyclic triaxial compression test, the value of ad, Kc, and (Oho) was introduced by the following interrelated equations which were similar to the Mr model of Cole. Kcn/Mr=K1(J$_2$/ $\tau$oct)K2 ............. (coarse soli) Mcn/Mr=K3($\sigma$dp/ $\tau$f)k4 ...............(fine soils) 5. The stress path was not much affected by the value of Mr, however, moisture content, dry desity, and contant of fines affected the value of Mr. 6. In the soil-cement specimens, the resilient compression strain($\varepsilon$d) was decreased by the increment of the $\sigma$ho, and Mr was decreased by increasing the $\sigma$d 7. In the flexible pavement. the cement treated layer should be designed not to fail by the fatigue before the designed traffic load, and actually the pavement could cover the traffic load to a certain extent under the post-crack phase, therefore farther studies on this phenomena' are required in the design analysis. 8. The finite element computer program (ANALYS) was used for displacement analysis of pavement containing the cement-treated layer, The result showed that the program used for this analysis was proved to be usable.

• 한국도로학회논문집
• /
• 제5권4호
• /
• pp.13-22
• /
• 2003

국내의 경우 도로포장설계시 외국의 설계법을 단순히 도입하여 사용하고 있지만 건설재료,기후 및 교통조건 등이 외국과 상이하기 때문에 근본적 인 제한성이 있다. 특히, 국내 포장구조해석에서 아스팔트층 거동특성만을 중요시하는 해석은 포장구조체가 각 층의 영향을 받는 종합적인 거동특성을 보인다는 포장구조체 시스템적인 특성을 고려한다면 많은 문제점을 내포하고 있다. 따라서, 도로포장 설계시 합리적이고 경제적인 설계를 할 수 있도록 포장구조체의 해석 시스템을 구축하여야 한다. 본 연구에서는 비선형성이 포장체에 미치는 영향을 알아보기 위한 수치해석의 기본작업으로 다층구조상태인 포장체의 거동해석에 영향을 미치는 두께와 탄성계수 조합으로 구성된 243개의 표준단면과 하중종류에 따른 영향을 분석하여 응력의 변화분포가 큰 경우를 해석단면으로 결정하였다. 분석결과 탄성계수보다 층 두께의 영향이 더 큼을 알 수 있었다. 또한. 하중의 경우 원형등 분포하중인 정적하중과 FWD 시험하중을 비교한 결과 FWD 시험하중의 응력분포가 더 큼을 알 수 있었다. 결정된 해석단면을 이용하여 포장하부의 재료적 특성을 대변하는 비선형탄성모델을 각 층별로 적용시켜 기존의 선형탄성모델을 이용한 해석결과와 비교 분석한 결과 포장하부시스템 중 보조기층에서는 지반내 응력상태를 반영할 수 있는 비선형모델을 고려해야 하는 것이 보다 합리적임을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.405-416
• /
• 2005

The rubblization technique is breaking the aged concrete pavement slab into rubblized concrete aggregate, and use it as an base material at its original position, then builds overlay above the rubblized base. This method has been successively used in USA due to the advantage of good contructibility, cost-effectiveness as well as the capability of preventing of reflection cracks. However, constructibility and economic performance of rubblization on typical Korean concrete pavements needed to be investigate since to typical Korean concrete pavements have thick slab, as well include lean concrete subbase course. This stud explored optimum breaking depth and suggested minimum 10cm based on reflection crack simulation test. Also proper head shape and impact energy were investigated based on small breaking field tests. It was found that $127kg/cm^2$ of stress with 52.3% of head contact area are breaking requirement. Also, Multi-head type breaker suitable for Korean condition was designed and developed. This multi-head type breaker was designed to rubblize old concrete to the suggested optimum rubblized-depth and rubblized-concrete-aggregate size to prevent reflection crack and maintain high bearing capacity. This machine was used for the test of rubblization of old concrete pavement on a non-use old concrete and a in-serviced road. In these two tests, engineering properties of rubblized base and constructability and cost were investigated. In both tests, the old concrete rubblized to targeted size and depth, and high-level bearing capacity was achieved. Also, superior constructability and lower cost compared with traditional reconstruction was examined.

• 한국도로학회논문집
• /
• 제6권2호
• /
• pp.37-45
• /
• 2004

아스팔트 포장은 주행의 쾌적성, 안전성 그리고 시공 및 보수의 용이성으로 인하여 세계적으로 많은 도로에 널리 이용되고 있다. 그러나 우리나라의 경우 고도의 경제성장으로 인한 교통량 증가와 차량의 중량화로 야기된 상습적 인 지체와 여름철 고온현상으로 아스팔트 포장의 파손정도가 심화되고 포장수명이 단축됨으로서 유지보수비용이 급격히 증가하는 양상을 보이고 있다. 이에 국내외에서 아스팔트 포장에 대한 파손 방지대책 및 내구성 증진에 관한 연구들이 진행되고 있으며 그 한 방법으로 토목섬유와 같은 보강재를 포장체에 삽입하고 있다. 본 연구에서는 아스팔트 포장 표층의 거동을 점탄성으로 분석하였으며 포장체에 삽입된 지오그리드의 설치 위치, 포장단면의 두께를 조합하여 지오그리드의 최적 설치 위치를 알아보고 포장단면의 물성에 따른 민감도 분석을 수행하였다. 연구결과, 지오그리드를 기층과 보조기층 사이에 보강하였을 경우. 기층아래에서 발생하는 횡방향 인장응력을 무보강 아스팔트 포장에 비해 29$\sim$56% 정도 감소시켜 균열 발생을 상당히 억제 할 수 있을 것으로 판단되었다. 또한, 노상에서의 수직 변형률과 최대 전단변형률을 살펴보았을 때 지오그리드를 포장체에 삽입하여 소성변형에 대한 억제 효과도 얻을 수 있는 것으로 판단되었다.

• 지질공학
• /
• 제13권3호
• /
• pp.345-358
• /
• 2003

근래에 와서 천연골재자원의 보호와 건설 폐기물의 재활용의 측면에서 폐 콘크리트에서 분리한 재생골재의 재활용이 모색되어 왔으나, 재생골재는 주로 콘크리트 도로기층용과 구조물 됫채움재와 같은 저급재료로 사용되고 있다. 본 연구는 재생골재의 콘크리트 용 골재로의 효율적인 재활용 가능성을 위하여, 재생골재의 구성광물, 화학조성 및 공학적 물성 특성 파악하고 재생콘크리트(RCA)의 시공성과 역학적 특성에 대한 연구를 수행하였다. 재생골재에 잔존하는 폐 콘크리트의 모르타르 및 시멘트 페이스트는 골재의 기초 물성 특성, 재생콘크리트의 시공성 및 굳은 콘크리트의 공학적 특성에 주요한 영항을 미치는 것으로 나타났다. 그러나, 적절한 양의 재생굵은골재를 대체한 재생콘크리트는 압축강도와 동결융해 내구성에서 보통 콘크리트의 기준에 근접하는 것으로 나타났다 따라서, 재생골재의 제조과정에서 폐 콘크리트의 모르타르 및 시멘트 페이스트의 제거가 효율적으로 이루어지고 적절한 대체율이 적용되면, 재생골재는 콘크리트용 골재로서 효율적인 사용이 확대 될 수 있을 것으로 사료된다.