• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.281-286
• /
• 1992

This paper describes a duplexed process control system for a boiler-turbine system of power plant, which is composed of supervisor, controller, and simulater subsystems. Its embeded POL(Problem oriented language) as a structured control language enables this system to do a real-time distributed control and fault diagnosis by simple programming with the actual implementation of advanced control algorithms such as PID autotuning and GPC, etc, the performance of overall system has been greatly enhanced.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1349-1354
• /
• 1990

This paper deals with the control of autonomous vehicle in the production systems. Presently, there is a significant interest in autonomous vehicles which are capable of intelligent motion (and action) without requiring a guide track to follow. This paper describes a PI-F adaptive control algorithm, which is used to drive an experimental autonomous vehicle along a given trajectory. The simulation results characterizing the accuracy og the algorithm are presented.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.439-444
• /
• 1999

This paper presents an authoring system for users to create and edit multimedia documents more easily. Our system supports dynamic authoring to feedback the inconsistency that could be occurred when users authorize and flexible media synchronization. For these, we define a new time relation based on causal relation and provide an internal representation using trees and structured document parsing. The system consists of the components such as visual interface, parsing, and presentation engine. It has been implemented on Microsoft Windows 95 with Visual C++.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.35-44
• /
• 1994

In this paper, an observer for linear discrete systems with unknown inputs is presented. The suggested observer can estimate the system state vector and the unknown inputs simultaneously. As an extension of the observer, a new fault diagnosis observer for linear discrete systems with structured uncertainty is presented. The fault diagnosis observer can detect and identify the actuator and the sensor faults as well. The stability conditionsand the design methods of the each observers are presented and the usability of the observers is shown via numerical examples.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.59
• /
• pp.85-95
• /
• 2000

Since the cost of a new product is determined mainly at the design stage, systematic tools to support the new product to be manufactured at the predetermined cost is very important for successful introduction of a new product. PDM is a tool to support engineers to integrate product data throughout the product development. In this paper, we introduce a prototype of PDM system which has a target costing function, where cost estimation is coupled with structured product data.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.311-313
• /
• 2004

WC-12-17%Co powders with nano- and micro-structures were deposited by cold spray process using nitrogen and helium gases. The results show that there is no detrimental phase transformation and/or decarburization of WC by cold spray deposition as expected. It is also observed that nano-sized WC in the feedstock powder is maintained in the cold spray deposition. It is demonstrated that it is possible to fabricate the nano-structured WC-Co coating with low porosity and very high hardness (-2050 HV) by cold spray deposition with reasonable powder preheating.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.773-778
• /
• 1990

In this paper, a reliable control system structured with dual CPU modules and dual I/O modules is implemented as a means of achieving a highly reliable fault tolerant control system. For this, faults in the system modules are first examined, and a fault detection technique consisting of self diagnostic, comparison process, and exception processing is applied. Also reliability analysis is conducted for the discrete time Markov model with dual structure. It is shown quantitatively that the reliability is improved in the control system with dual structure in comparison with a system with single module structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.556-561
• /
• 1987

This paper presents a suboptimal Kalman filter design method for the problem of tracking a maneuvering target. The design method is essentially based on linear target dynamics and linear-like structured measurements called pseudomeasurements. The pseudomeasurements are obtained by manipulating the original nonlinear measurements algebraically. The resulting filter has computational advantages over other filters with similar performance. Monte Carlo computer simulation results are included to demonstrate the effectiveness of the proposed suboptimal filter associated with the target acceleration model.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.306-319
• /
• 2008

Reaching fault tolerance in technological systems requires to detect malfunctions. This paper presents a diagnostic method that is robust with respect to unknown-but-bounded uncertainties of the dynamical model and the measurements. By using models of the faultless and the faulty behaviours, a state-set observer computes polyhedral sets from which the consistency of the models with the interval measurements is determined. The diagnostic result is proven to be complete, i.e., the set of faults obtained by the diagnostic algorithm includes the actual fault. The algorithm is illustrated by an application example.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2375-2378
• /
• 2003

In manufacture of printed circuit boards, one important issue is precisely to measure the three-dimensional shape of the solder paste silk-screened prior to direct surface mounting of chips. This paper presents the 3D shape reconstruction of solder paste using the optical triangulation method based on structured light or slit beam and the measurement algorithm for height, volume. area, and coplanarity on component pads from the 3D range image. Futhermore, statistical process control function is incorporated for process capability analysis.