• Membrane Journal
• /
• v.26 no.3
• /
• pp.187-196
• /
• 2016

Pressure-assisted forward osmosis (PAFO) process has recently been under spotlight for its potential to improve forward osmosis (FO) process performance by applying low hydraulic pressure on the feed side. Structure parameter, one of the governing factors in estimating water flux and solute flux across FO membranes in the solution-diffusion model (S-D model), determines solute resistivity in FO and PAFO processes. This study aims to estimate the trend of structure parameter change with respect to varying additional hydraulic pressure condition in PAFO.

• Communications of the Korean Mathematical Society
• /
• v.34 no.2
• /
• pp.465-475
• /
• 2019

Let X be a Banach space and $X^*$ be its dual. In this paper, we give relationships among some parameters in $X^*$: ${\varepsilon}$-nonsquareness parameter, $J({\varepsilon},X^*)$; ${\varepsilon}$-boundary parameter, $Q({\varepsilon},X^*)$; the modulus of smoothness, ${\rho}_{X^*}({\varepsilon})$; and ${\varepsilon}$-Pythagorean parameter, $E({\varepsilon},X^*)$, and weak orthogonality parameter, ${\omega}(X)$ in X that imply uniform norm structure in X. Some existing results are extended or approved.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.57.1-57.1
• /
• 2013

We investigate the method to measure both the present value of the matter energy density contrast and the Hubble parameter directly from the measurement of the linear growth rate which is obtained from the large scale structure of the Universe. From this method, one can obtain the value of the nuisance cosmological parameter $\Omo$ (the present value of the matter energy density contrast) within 3% error if the growth rate measurement can be reached $z >3.5$. One can also investigate the evolution of the Hubble parameter without any prior on the value of $H_0$ (the current value of the Hubble parameter). Especially, estimating the Hubble parameter are insensitive to the errors on the measurement of the normalized growth rate $f \sigma_8$. However, this method requires the high $z$ ($z >3.5$) measurement of the growth rate in order to get the less than 5% errors on the measurements of $H(z)$ at $z \leq 1.2$ with the redshift bin $\Delta z = 0.2$. Thus, this will be suitable for the next generation large scale structure galaxy surveys like WFMOS and LSST.

• Structural Engineering and Mechanics
• /
• v.71 no.1
• /
• pp.45-56
• /
• 2019

A modified mechanical model of pre-pressed spring self-centering energy dissipation (PS-SCED) brace is proposed, and the hysteresis band is distinguished by the indication of relevant state variables. The MDOF frame system equipped with the braces is formulated in an incremental form of linear acceleration method. A multi-objective genetic algorithm (GA) based brace parameter optimization method is developed to obtain an optimal solution from the primary design scheme. Parameter sensitivities derived by the direct differentiation method are used to modify the change rate of parameters in the GA operator. A case study is conducted on a steel braced frame to illustrate the effect of brace parameters on node displacements, and validate the feasibility of the modified mechanical model. The optimization results and computational process information are compared among three cases of different strategies of parameter change as well. The accuracy is also verified by the calculation results of finite element model. This work can help the applications of PS-SCED brace optimization related to parameter sensitivity, and fulfill the systematic design procedure of PS-SCED brace-structure system with completed and prospective consequences.

• Steel and Composite Structures
• /
• v.39 no.5
• /
• pp.511-528
• /
• 2021

There are recently some advances in solving numerically topology optimization problems for large-scaled trusses based on ground structure approach. A disadvantage of this approach is that the final design usually includes many bars, which is difficult to be produced in practice. One of efficient tools is a so-called filter scheme for the ground structure to reduce this difficulty and determine several distinct bars. In detail, this technique is valuable for practical uses because unnecessary bars are filtered out from the ground structure to obtain a well-defined structure during the topology optimization process, while it still guarantees the global equilibrium condition. This process, however, leads to a singular system of equilibrium equations. In this case, the minimization of least squares with Tikhonov regularization is adopted. In this paper, a proposed algorithm in controlling optimal Tikhonov parameter is considered in combination with the filter scheme due to its crucial role in obtaining solution to remove numerical singularity and saving computational time by using sparse matrix, which means that the discrete optimal topology solutions depend on choosing the Tikhonov parameter efficiently. Several numerical examples are investigated to demonstrate the efficiency of the filter parameter control algorithm in terms of the large-scaled optimal topology designs.

• International Journal of Automotive Technology
• /
• v.5 no.3
• /
• pp.189-194
• /
• 2004

The viscoelastic layer material is widely used to control the noise and vibration characteristics of the panel structure. This paper describes the design technology of the effective vibration damping treatment using the concept of the equivalent parameter of viscoelastic layer materials. Applying the equivalent parameter concepts based on theories of shell, it is possible to simulate the finite element analysis of damping layer panel treatments on the vibration characteristics of the structure. And it is achieved the reduced computational cost and the optimal design of topological distribution for the reduction of vibration effect.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.852-857
• /
• 2003

This paper has the object of investigating natural frequencies of thick plates on inhomogeneous Pasternak foundation by means of finite element method and providing kinematic design data lot mat of building structures. This analysis was applied for design of substructure on elastic foundation. Mat of building structure may be consisdered as a thick plate on elastic foundation. Recently, as size of building structure becomes larger, mat area of building structure also tend to become target and building structure is supported on inhomogeneous foundation. In this paper, vibration analysis or rectangular thick plate is done by use or serendipity finite element with 8 nodes by considering shearing strain of plate. The solutions of this paper are compared with existing solutions and finite element solutions with 4${\times}$4 meshes of this analysis are shown the error of maximum 0.083% about the existing solutions. It is shown that natrural frequencies depend on not only Winkler foundation parameter but also shear foundation parameter.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.6
• /
• pp.246-256
• /
• 1986

Determination of an aerodynamic structure is a very important problem in missile modeling. The structure problem is to choose an appropriate set of aerodynamic coefficients to represent chosen missile dynamics. A methodology and criteria to determine a structure from windtunnel data are presented in this paper. Aerodynamic coeffecients in the determined structure are then identified by parameter identification algorithms. The identified coefficients are in turn used to verify appropriateness of the structure. The extended Kalman filter (EKF) and the maximum likelihood mithod (ML) are adopted as the parameter identification algorithm. Both methods exhibit satisfactory results. While the model identified by the ML more closely follows dynamics of the chosen missile than that by the EKF.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.335-340
• /
• 2001

It is important to model the mechanical structure precisely and reasonably in predicting the dynamic characteristics, controlling the vibration, and designing the structure dynamics. In the finite element modeling, the errors can be contained from the physical parameters, the approximation of the boundary conditions, and the element modeling. From the dynamic test, more precise dynamic characteristics can be obtained. Model updating using parameter modification is appropriate when the design parameter is used to analyze the input parameter like finite element method. Finite element analysis for cantilever and simply supported beams with uniform area and shape change are carried out as model updating examples. Mass and stiffness matrices are updated by comparing test and analytical modal frequencies. The result shows that the updated frequencies become closer to the test frequencies.

• Applied Microscopy
• /
• v.28 no.3
• /
• pp.415-424
• /
• 1998

The dependency of long-range order parameter on the ordered structure of $Pb(Mg_{1/3}Nb_{2/3})O_3$ solid solutions has been investigated by means of computer simulations of high-resolution lattice images. The computer image simulations were performed by the multislice method in a wide range of sample thicknesses, defocusing values, and long-range order parameters. It was found that the lattice images of the ordered structures were predominantly dependent on the long-range order parameter, The lattice images in a complete ordered structure showed a pseudo-hexagonal pattern. As the order parameter decreases, the simulated images changed slowly from a pseudo-hexagonal pattern to a rectangular pattern. The lattice images in a complete disordered structure showed a rectangular pattern. Also, the simulated images of the $Pb(Mg_xNb_{1-x})O_3$ with different Mg:Nb ratios obtained at a given long-range order parameter were basically the same patterns, irrespective of Mg and Nb compositions.