• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.34-39
• /
• 2008

In this study, CFRP(Carbon Fiber Reinforced Plastics) that has high specific strength and elastic modulus and low thermal strain was used as a material for the lightweight structural member. CFRP is a fiber material as anisotropic material. The anisotropic material is characterized by the change of its mechanical properties according to stacking orientation angle. CFRP orientation angle was oriented in [A/B]s in order to examine the effect of CFRP orientation angle on the characteristics of energy absorption. CFRP is very weak to the impact from the outside. So, when impact is applied to CFRP, its strength is rapidly lowered. The hybrid material was manufactured by combining CFRP to aluminum which is lightweight and widely used for structural members of the automobile. The hybrid member was shaped as a side member that could support the automobile engine and mount and absorb a large amount of impact energy at the front-end in case of automobile collision. The bending test device was manufactured in accordance with ASTM standard, and mounted to UTM for bending test. For comparing bending characteristics of the hybrid member with those of Aluminum and CFRP member, tests were performed for aluminum, CFRP and hybrid member, respectively.

• Steel and Composite Structures
• /
• 제4권6호
• /
• pp.419-435
• /
• 2004

The safety level of a structural system designed per code specifications can not be inferred directly from the reliability of members due to the load redistribution and nonlinear inelastic structural behavior. Comparison of the system and member reliability, which is scarce in the literature, is likely to indicate any possible inconsistency of design codes in providing safe and economical designs. Such a comparative study is presented in this study for moment resisting two-dimensional steel frames designed per AISC LRFD Specifications. The member reliability is evaluated using the resistance of the beam-column element and the elastic load effects that indirectly accounts for the second-order effects. The system reliability analysis is evaluated based on the collapse load factor obtained from a second-order inelastic analysis. Comparison of the system and member reliability is presented for several steel frames. Results suggest that the failure probability of the system is about one order of magnitude lower than that of the most critically loaded structural member, and that the difference between the system and member reliability depends on the structural configuration, degree of redundancy, and dead to live load ratio. Results also suggest that the system reliability is less sensitive to initial imperfections of the structure than the member reliability. Therefore, the system aspect should be incorporated in future design codes in order to achieve more reliability consistent designs.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.90-96
• /
• 2016

This study proposes a dynamic reliability analysis of control system as a method of quantitative evaluation of its performance in probabilistic terms. In this dynamic reliability analysis, the failure event is defined as an event that the dynamic response of the structural system exceeds a displacement limit, whereas the conventional reliability analysis method has limitations that do not properly assess the actual time history response of the structure subjected to dynamic loads, such as earthquakes and high winds, by taking the static response into account in the failure event. In this first paper, we discuss the control effect of the viscous damper on the seismic performance of the member-level failure where the failure event of the structural member consists of the union set of time-sequential member failures during the earthquake excitations and the failure probability of the earthquake-excited structural member is computed using system reliability approach to consider the statistical dependence of member failures between the subsequent time points. Numerical results demonstrate that the proposed approach can present a reliable assessment of the control performance of the viscous damper system in comparison with MCS method. The most important advantage of the proposed approach can provide us more accurate estimate of failure probability of the structural control system by using the actual time-history responses obtained by dynamic response analysis.

• 한국터널지하공간학회 논문집
• /
• 제13권2호
• /
• pp.149-158
• /
• 2011

최근 장기 부식 등 일반적인 건설재료의 문제점을 보완할 수 있는 대체 재료로서, 섬유강화 복합재료의 활용이 증대되고 있다. 하지만 일반적으로 선형의 섬유강화 복합재료를 아치형인 터널구조물의 부재로서 활용하는 데는 많은 문제점이 대두된다. 본 연구에서는 FRP 복합부재의 거동특성 파악을 위한 수치해석적 사전검토 연구를 토대로, 터널 지보구조물로서 활용성 분석을 위한 FRP와 콘크리트 합성부재에 대한 하중재하 실험을 수행하였다. 또한 역학적 거동분석을 위하여 동일 조건에 대한 수치해석을 수행하였다. 하중재하 실험 및 수치해석결과, FRP와 콘크리트 합성부재는 두 부재 계면의 휨 인장에 의한 전단거동에 큰 영향을 받는 것으로 나타났다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.408-413
• /
• 2004

High speed planning boats also have been required more and more the rational strength analysis and evaluation for the optimal structural design in respect of the structural lightness according to the high speed trend. Even though the suggestion of the simple type equation for the equivalent dynamic pressure is reasonable to design the scantling of ship structure conveniently, many research activities for more reasonable improvement of the simple design pressure, have been continued to suggest the more accurate equivalent static description of tire structural response such as the deflection and stress of hull structure. In this research, we focus on the aluminum bottom stiffened plate structure in which structural scantling is mainly depend on the local loads such as dynamic or impact pressure without other load effects and structural response for the simple dynamic equivalent pressure was investigated through the structural analysis. In order to investigate the structural response of the bottom stiffened plate structure subjected to the dynamic equivalent design pressure, linear and nonlinear structural analysis of the bottom stiffened plate structure of 4.3 ton aluminum planning boat was performed based on the equivalent static applied loads which were derived from the KR regulation and representative one among various dynamic equivalent pressure equations. From above analysis results, we found that the response such as deflection and stress of plate member was similar with the response results of one plate member model with fixed boundary, which was published previous paper and in case of KR design loading, all response of stiffened plate structure were within elastic limit. Through the nonlinear analysis, nearly elastic behavior including the slight geometrical nonlinear response was dominant but plastic local zone was appeared at $85\%$ limit load. Therefore, we can say that through tire linear and nonlinear analysis, this stiffened plate member has no structural strength problem based on the yield criteria in case within $60\%$ limit load except the other strength point of view such as the fatigue and buckling problem.

• 한국경영과학회지
• /
• 제17권2호
• /
• pp.53-90
• /
• 1992

THis study examines a contingency relationship between task uncertainty and structure of project teams in conjunction with the leader-member communication patterns. Multivariate analyses are used to analyze the data from 63 R & D project teams of research laboratory in a large manufacturing corporation. Major findings for this study can be summarized as follows. First, project teams with an organic structure are found to yield high performance when task uncertainty is high, while project teams with a mechanistic structure achieve high performance when their tasks are relatively certain. Second, patterns of leader-member comunication are significantly associated with both task uncertainty and structural characteristics of project teams. This implies that leaders of project teams communicate with their members in more conslutative manner when their tasks are uncertain or when their team structure exhibits organic characteristics. Finally, task uncertainty playus a significant moderating role in the relationship between consultative communication patterns and performance of project teams. Based upon these findings, this study offers several theoretical, practical, and methodological implications.

• 건축역사연구
• /
• 제28권1호
• /
• pp.7-16
• /
• 2019

As a part of the research on existing structures of private homes from Joseon Era. Focusing on one hundred twenty five-purlin houses, the current study investigated the features and characteristics of the house structure from style, size, proportion and roof pitch, and measurements of key parts, and developed the following conclusions. Most are single-houses (89, 83%), and among them, there are 47 single front-terrace houses (39%), which is the highest number. The sizes of lower house structure do not differ greatly depending on the vertical structure, and single rear terrace house and double-house have relatively larger side sizes. The size of upper structure is larger in double-houses compared to other vertical structures, indicating a relatively higher roof. The cross-section measurement of major parts show that double-houses are larger than single-houses by 3cm in pillar, 3-4.5cm in crossbeam length, and 4.5cm in crossbeam width. However, Janghyeo width was consistent at 7.5 to 10.5cm, maintaining uniformity regardless of vertical structure of the houses. In addition, the cross-section measurements decreased from sixteenth to nineteenth century, with the size of pillar size decreasing the most. The result that the Janghyeo width is not related to the house structure house confirmed that the Janghyeo width was kept consistent regardless of the size of the house structure.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.69-78
• /
• 2023

For this purpose, the research is to study the architectural characteristic of SooMaJaiJeon which is one of the DongHwaSa in the traditional wooden architecture by dividing it into three section-bracket, roof structure and frame structure. This study is largely divided into four stage-section do subject, research and actual measurement and conclusion. The whole process was consistently executed through detailed steps. The com position of this study is as follows. The 1^st chapter-the purpose, background, method, object and range of the research. The 2^nd chapter-the history of SooMajaiJeon. the 3^rd chapter-the structure of Dapo-style bracket has generally considered, the frame structure of Dapo-style, vertical and horizontal member and podium, the characteristic of bracket with member and the structure, design of bracket, roof structure. In the 4^th chapter, the conclusion of this study has been summarized, Dapo-style is the building that has deep symbolism and structural characteristic of traditional wooden architecture. The frame structure has a dominant regional characteristic and a typical part of typological classification in SooMaJaiJeon.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.37-42
• /
• 2008

구조물에서 케이블 부재는 압축이나 휨이 없이 인장력에 의해서 하중을 전달하는 시스템이다. 케이블 시스템은 대공간 구조의 지붕, 공기 지지구조, 프리스트레스 막구조, 케이블 네트워크 구조, 현수구조, 가이드 타워, 해양 프래트폼, 현수교 등의 구조물에 널리 사용되어 왔다. 케이블 부재는 부재 단부에 소켓, 스웨이징, 스프라이스 슬리브, 클립, 웨지, 루프 스프라이스 등에 의해서 하중을 전달 할 수 있다. 본 연구에서는 케이블 연결 소켓의 인장강도에 대한 실험을 수행하고자 한다. 실험결과에서 대부분의 시험체가 케이블이 파단하중에 도달하기 전에 소켓의 연결부에서 파단이 일어났다.

• 한국공간구조학회논문집
• /
• 제9권2호
• /
• pp.91-97
• /
• 2009

본 논문은 Total Lagrangian(TL)과 Updated Lagrangian(UL)을 사용하여 구조물 하부에 케이블을 연결하고, 그 케이블에 인장력을 가하여 구조물의 처짐을 제어하는 언더텐션 시스템에 있어서 케이블의 인장력에 따른 구조물의 처짐 거동의 변화와 각 부재력을 비교함으로서 언더텐션 시스템의 효율성을 검증하는데 있다. 일반적인 빔과 거더로 이루어진 구조와는 달리 언더텐션 시스템에서는 상부에서는 하중을 하부 케이블의 인장력을 이용하여 그 하중을 양 단부로 전달하게 된다. 언더텐션 시스템은 스트럿의 개수와 길이, 케이블의 초기 인장력의 크기에 따라서 그 효과가 다르게 나타날 수 있다. 또한 케이블이 설치된 장스팬 구조의 경우, 그 거동에 있어서 비선형성적 거동이 크게 나타나게 된다. 따라서 본 논문에서는 선형과 비선형해석 결과를 비교함으로써 비선형해석의 필요성에 대하여 논의하고자 한다.