• Steel and Composite Structures
• /
• 제50권3호
• /
• pp.337-345
• /
• 2024

This research proposed a particle swarm optimization (PSO) based seismic retrofit design of moment frame structures using a steel frame assembly. Two full scale specimens of the steel frame assembly with different corner details were attached to one-story RC frames for seismic retrofit, and the lateral load resisting capacities of the retrofitted frames subjected to cyclic loads were compared with those of a bare RC frame. The open source software framework Opensees was used to develop an analytical model for validating the experimental results. The developed analytical model and the optimization scheme were applied to a case study structure for economic seismic retrofit design, and its seismic performance was assessed before and after the retrofit. The results show that the developed steel frame assembly was effective in increasing seismic load resisting capability of the structure, and the PSO algorithm could be applied as convenient optimization tool for seismic retrofit design of structures.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.107-113
• /
• 2013

The design of rainwater storage system unit to manufacture its reservoir tank was tried, the simulation to predict of their structural strength was carried out. Rainwater storage system unit should be easy to their machinability, transport and assemble. Especially, their structure was able to secure the water storage space, withstand loads and easily response to pollution. Considering these various requirements, they have to Doria-pillar structure of the Roman architectural style because these designs could disperse the loads which are applied to them. Therefore, the six kinds of models possible were proposed. Several boundary conditions were given to each model. Their structural strength was predicted through the simulation on their stress and the displacement distribution to constant load. From the evaluated data, the structure which has a large pillar in the central of unit and four small pillars each corner was the best.

• Structural Engineering and Mechanics
• /
• 제8권3호
• /
• pp.233-242
• /
• 1999

In the present study, the elasto-plastic analysis of prismatic plate structures subjected to pure bending is carried out using the finite strip method. The end cross-sections of the structure are assumed to remain plane during deformation, and the compatibility along corner lines is ensured by choosing proper displacement functions. The effects of both the initial geometrical imperfections and residual stresses due to fabrication are included in the combined geometrically and materially nonlinear simulation. The von-Mises yield criterion and the Prandtl-Reuss flow theory of plasticity are applied in modelling the elasto-plastic behavior of material. Newton-Raphson iterations are carried out as the rotation of the end cross sections of the structure is increased step by step. The parameter representing the overall axial strain of structure is adjusted constantly during the iteration process in order to eliminate the resulting overall axial force on any cross-section of the structure in correspondence with the assumption of zero axial force in pure bending. Several numerical examples are presented to validate the present method and to investigate the effects of some material and geometrical parameters.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.371-377
• /
• 2013

본 논문에서는 FAST와 BRIEF 알고리즘을 기반으로 하는 증강현실을 구현하기 위해서 효율적인 병렬 구조를 제안한다. 객체 인식 알고리즘으로 잘 알려진 SURF 알고리즘은 객체인식에 강인하지만 연산 량이 많아 실시간으로 구현하기에 어려운 단점을 가지고 있다. FAST와 BRIEF 알고리즘을 활용하여 객체를 인식하였고, 임베디드 환경에서 성능을 향상하기 위해 기존의 OpenMP 라이브러리를 사용한 병렬구조를 개선하여 속도를 약 70%에서 100%로 향상 시켰다.

• Geomechanics and Engineering
• /
• 제24권1호
• /
• pp.67-79
• /
• 2021

The influence of ground motions on the seismic response of utility tunnels was investigated. A series of small-scale shaking table model tests were carried out under uniform excitation in the transverse direction. Different peak accelerations of EL-Centro and Taft earthquake waves were applied. The acceleration responses, earth pressure, seismic strain, bending moment and structure deformations were measured and discussed. The results showed that the types of earthquake waves had significant influences on the soil-structure acceleration responses. However, the amplitude of the soil acceleration along the depth showed consistent variation regardless of the types of earthquake waves and tunnels. The horizontal soil pressure near the top and bottom slabs showed obviously larger values than those at other depths. In general, the strain response in the outer surface was more significant than that on the inner surface, and the peak strain in the end section of the model was larger than that in the middle section. Moreover, the bending moment at the corner points was much larger than that at middle point, and the bending moment was greatly affected by both input accelerations and seismic wave types. The opposite direction of shear deformation on the top and bottom slabs presented a rotation trend of the model structure.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.333-347
• /
• 2013

The present study numerically models the interaction between a regular wave and the roll motion of a rectangular floating structure. In order to simulate two-dimensional incompressible viscous two-phase flow in a numerical wave tank with the rectangular floating structure, the present study used the volume of fluid method based on the finite volume method. The sliding mesh technique is adopted to handle the motion of the rectangular floating structure induced by fluid-structure interaction. The effect of the wave period on the flow, roll motion and forces acting on the structure is examined by considering three different wave periods. The time variations of the wave height and the roll motion of the rectangular structure are in good agreement with experimental results for all wave periods. The present response amplitude operator is in good agreement with experimental results with the linear potential theory. The present numerical results effectively represent the entire process of vortex generation and evolution described by the experimental results. The longer wave period showed a different mechanism of the vortex evolution near each bottom corner of the structure compared to cases of shorter wave periods. In addition, the x-directional and z-directional forces acting on the structure are analyzed.

• 콘크리트학회논문집
• /
• 제26권6호
• /
• pp.715-722
• /
• 2014

본 논문에서는 철근콘크리트 코어 구조물의 내부폭발 효과를 폭발이나 충격해석에 특화되어 있는 하이드로코드인 Ansys Autodyn을 이용하여 조사하였다. 내부폭발의 경우 폭발하중의 반사효과로 인해 더욱 큰 파괴를 일으킬 수 있다. 그러므로, 본 논문에서는 UFC 3-340-02 를 사용하여 내부 폭발현상을 입증하였다. 추가적으로 Autodyn을 사용한 해석에 관하여 UFC에서 예제로 제시하는 폭발하중의 반사에 관한 실험 결과를 비교하여 Autodyn이 내부폭발 효과를 해석하는데 적합함을 증명하였다. 나아가, 초고층빌딩에서 가장 중요한 부분 중의 하나의 코어 구조의 붕괴메커니즘을 Autodyn을 사용하여 해석하였다. 내부폭발이 코어에 충격을 가할 때, 코어는 모서리와 폭발 정면 부분이 대부분 피해를 입었다. 그러므로, 코어 벽체가 피해를 입게 된다면 코어 구조물의 연쇄붕괴가 발생할 수 있다.

• 건축역사연구
• /
• 제14권4호
• /
• pp.87-100
• /
• 2005

We have focused on the roof construction method of Urban Hanok in Bukchon, Seoul. The Urban Hanok, urban traditional housing type, had been evolved In modern context from 1930's to 1960's. We have confused Urban Hanok with traditional Hanok, because they have similar figures. But Urban Hanok have the characteristics as a result of the roof construction method. The purpose of this paper is to define Urban Hanok more concretely, thus we payed attention to the roof structure, specially to the comer that each roof structure meets. So we got some characteristics of the roof construction method of Urban Hanok in Bukchon. First, the roof construction methods of the roof are transformed at the corner parts, where three purlin structure and five purlin structure meet. The collision of the different roof structure has made a lot of types. Second, the roof slope of Urban Hanok is more gentle than traditional Hanok, that is caused by ornamental double eaves and awnings. Finally these characteristics are results of the compact lot size in urban neighborhood. The construction method is a inclusive word that contain materials, composition, ornament and social common sense. With the understanding on the roof construction method of Urban Hanok, we can define the identity and the value of Urban Hanok, And we can suggest the policy and the design guidelines for the reservation and rehabilitation for Urban Hanok of Bukchon, Seoul.

• 한국가스학회지
• /
• 제9권1호
• /
• pp.1-8
• /
• 2005

본 연구에서는 $9\%$ 니켈강재식 LNG저장탱크에 대한 누설 안전성을 여러 가지 단열재와 코너 프로텍션, PC 구조물 사이에 존재하는 열저항 평형온도 효과를 고려하여 유한요소법으로 해석하였다. FEM 계산결과에 따르면, 파이버 글라스 블랑켓, 펄라이트 파우더, 셀루러 글라스 단열재 등은 재질의 취약한 강도 때문에 누설 LNG에 의한 하중이 가해지면 단열재 자체가 파손되므로 누설 안전성을 보장할 수 없게 된다. 그러나, 내부탱크와 단열재가 동시에 파손되어도 $9\%$ 니켈강재로 제작된 코너 프로텍션(CP) 예응력 콘크리트(PC)구조물의 외부탱크는 LNG의 복합하중에 대하여 강도 안전성을 확보하고 있으므로, 누설 LNG를 최소한 10일 정도는 안전하게 체류시킬 수 있다. 따라서, $9\%$ 니켈강제식 LNG 저장탱크 시스템은 이들 두 가지 구조물에 의해 누설 안전성이 확보된다.

• Composites Research
• /
• 제30권6호
• /
• pp.384-392
• /
• 2017

인장과 압축하중 모두를 효과적으로 지지할 수 있는 새로운 샌드위치 체결부 구조의 설계를 위해, 체결부 형상이 다른 3가지 샌드위치 판넬에 대한 인장 및 압축 시험을 수행하였다. 샌드위치 판넬의 코어는 주로 알루미늄 플렉스 허니콤이지만, 타 구조물과의 체결을 위해 두께가 얇아지면서 단순 적층판으로 변하는 램프 영역에서는 PMI 폼 코어를 사용하였고, 면재에는 탄소섬유 복합재를 사용하였다. 형상 1에서는 복합재 플랜지와 샌드위치 구조가 일체형으로 연결된다. 형상 2와 3에서는 별도로 제작된 알루미늄 플랜지가 복합재 적층판에 하이록핀과 접착제로 체결된다. 시험 결과 형상 1, 2, 3의 평균 압축파손하중은 각각 295 kN, 226 kN, 291 kN으로 나타났고, 평균 인장파손하중은 각각 47.3(층간분리), 83.7 kN(볼트파손), 291 kN(치구손상)으로 나타났다. 압축 파손하중만을 고려할 경우 플랜지와 샌드위치 판넬을 복합재 일체형으로 제작한 형상 1과 3이 우수한 특성을 보였다. 그러나 형상 1의 경우 인장하중을 받을 때 낮은 하중에서 플랜지 모서리 부분에서 층간분리가 발생하였다. 따라서 인장과 압축하중을 동시에 효과적으로 지지할 수 있는 구조는 모서리에서 층간분리의 위험이 없게 별도의 알루미늄 플랜지를 사용하여 볼트로 체결한 형상 3임을 확인하였다.