• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.34-42
• /
• 2022

Hydrostatic transmission (HST) comprises rotary parts, shafts, valve plate, swashplate, and servo pistons. Ensuring structural stability of each part of an HST has a significant impact on product safety. In this study, the structural stability of HST in agricultural machinery and industrial vehicles was analyzed using ANSYS software. For conservative evaluation, high-pressure conditions (35.5 MPa and 2 MPa pilot pressure) were applied as load conditions. The number of grids used in the calculations ranged from 0.4 to 0.8 million depending on modeling requirements. Structural analysis was performed for essential parts and safety factor was analyzed. All major parts of HST had a safety factor of ≥ 1.5. Thus, they were judged to be structurally safe. This study provides important information for designing an HST system.

• Smart Structures and Systems
• /
• 제33권4호
• /
• pp.313-323
• /
• 2024

Deterioration of buildings is one of the biggest problems in modern society, and the importance of a safety diagnosis for old buildings is increasing. Therefore, most countries have legal maintenance and safety diagnosis regulations. However, the reliability of the existing safety diagnostic processes is reduced because they involve subjective judgments in the data collection. In addition, unstructured tasks increase rework rates, which are time-consuming and not cost-effective. Therefore, This paper proposed the method that can calculate the safety grade of deterioration automatically. For this, a DNN structure is generated by using existing precision inspection data and precision safety diagnostic data, and an objective building safety grade is calculated by applying status evaluation data obtained with a UAV, a laser scanner, and reverse engineering 3D models. This automated process is applied to 20 old buildings, taking about 40% less time than needed for a safety diagnosis from the existing manual operation based on the same building area. Subsequently, this study compares the resulting value for the safety grade with the already existing value to verify the accuracy of the grade calculation process, constructing the DNN with high accuracy at about 90%. This is expected to improve the reliability of aging buildings in the future, saving money and time compared to existing technologies, improving economic efficiency.

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.77-84
• /
• 2015

The purpose of this study was the analytical safety evaluation on the super-structure of precast modular bridge using standardized modular members and robotic construction during the transportation routing and lifting conditions. In order to evaluate the safety performance of the bridge system, 3-D full scale Finite Element (FE) of 40 m standardized modular block was developed in ABAQUS, followed by the analytical study to classify the structural system according to steel girder structures: 1) modular bridge block lifting method including the steel girder system; 2) modular bridge block lifting method without the steel girder system. The results from the analytical study revealed that the maximum stress of each modular member was within the maximum allowable stresses during lifting condition. However, the stress concentration at the connected area was more critical in comparison to the behavior of 40 m combined modular blocks during lifting time

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.25-34
• /
• 2017

현재 국내에서 준공 후 30년 이상 된 시설물은 현재 10.5% 수준에서 10년 후 23.9%로 급증할 전망이며, 국가 주요 시설물의 공용연수 증가에 따라 신설보다는 기존 시설물의 안전 확보와 수명을 연장하고 효율적인 유지관리체계 구축을 위해 새로운 평가체계가 필요하다. 본 연구에서는 기존 터널의 여러 구조 형식 중 가장 많이 시공된 NATM 터널에 대하여 체계적인 새로운 평가체계를 마련하고자 하며, 이를 위해 델파이 기법과 AHP 기법을 활용하였다. 기존 평가체계 및 평가항목 검토결과 도출가능한 평가항목이 한정적인 것으로 판단되어 기존에 적용되고 있는 항목에 대한 폐쇄적인 설문과 새로운 항목 도출을 위한 개방형 설문을 병행하여 설문조사를 실시하였다. 조사한 설문결과를 내용타당도 검증을 거쳐 NATM 터널에 적합한 평가인자를 도출하였으며, AHP기법을 활용하여 도출된 평가항목에 대한 가중치를 산정한 후 구조물의 특성에 맞는 평가체계를 새롭게 제시하여, 향후 세부지침 수정 및 보완 시 참고자료로 활용될 수 있도록 하고자 한다.

• 한국지진공학회논문집
• /
• 제24권6호
• /
• pp.267-275
• /
• 2020

In the event of an earthquake, non-structural components require seismic performance to ensure evacuation routes and to protect lives from falling non-structural components. Accordingly, the seismic design code proposes horizontal force for the design and evaluation of non-structural components. Ground motion observed on each floor is affected by a building's eigen vibration mode. Therefore, the earthquake damage of non-structural components is determined by the characteristics of the non-structural component system and the vibration characteristics of the building. Floor response spectra in the seismic design code are estimated through time history analysis using seismic waves. However, it is difficult to use floor response spectra as a design criterion because of user-specific uncertainties of time history analysis. In addition, considering the response characteristics of high-rise buildings to long-period ground motions, the safety factor of the proposed horizontal force may be low. Therefore, this study carried out the horizontal force review proposed in the seismic design code through dynamic analysis and evaluated the floor response of seismic waves considering buildings and predominant periods of seismic waves.

• 방사성폐기물학회지
• /
• 제21권4호
• /
• pp.559-570
• /
• 2023

The aim of this study is to ensure the structural integrity of a canister to be used in a dry storage system currently being developed in Korea. Based on burnup and cooling periods, the canister is designed with 24 bundles of spent nuclear fuel stored inside it. It is a cylindrical structure with a height of 4,890 mm, an internal diameter of 1,708 mm, and an inner length of 4,590 mm. The canister lid is fixed with multiple seals and welds to maintain its confinement boundary to prevent the leakage of radioactive waste. The canister is evaluated under different loads that may be generated under normal, off-normal, and accident conditions, and combinations of these loads are compared against the allowable stress thresholds to assess its structural integrity in accordance with NUREG-2215. The evaluation result shows that the stress intensities applied on the canister under normal, off-normal, and accident conditions are below the allowable stress thresholds, thus confirming its structural integrity.

• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.213-217
• /
• 2012

1) 선진 핵연료주기시설 관련 규제기술과 관련하여 인허가 안전심사의 경험이 없으며, 선진 핵연료주기시설 인허가를 위한 규제체계 및 안전성 평가방법 등의 개발이 필요한 단계이며 관련기기와 제반 공정에서 재료의 내식성을 평가하는 기준마련이 시급하다. 2) 선진 핵주기시설 관련 국내 기술수준을 분석하였고 그 핵심 공정인 전해환원, 전해정련, 전해제련공정의 실험변수를 조사하고 평가 필요항목을 정리하였다. 3) 전해환원과 전해정련공정의 경우 Hot-cell 내에 수분 및 산소가 일정 수준 이하로 유지되는 경우, 재료의 부식은 고려하지 않아도 되나 우라늄 잉곳 제조 공정에서 수냉 코일을 사용하게 되는 경우 물에 의한 부식을 고려해야 한다. 4) 전해 제련공정의 경우 LCC, RAR, Cd 증류공정에서 플랜지의 O-ring을 보호하기 위해 수냉 코일을 사용하게 되는 경우 물에 의한 부식을 고려해야 한다.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.265-269
• /
• 2016

In this research, the performances of active hood lift system(AHLS) are investigated according to the structural improvement through the experimental test. After introducing the working principle of the AHLS activated by a gunpowder actuator, the structural problems that cause the inefficiencies in the actuation are analyzed to reduce the deployment time of system. Sequentially, the improved structural model is proposed base on the analysis. The deployment time of AHLS are evaluated by the experimental test, and it has been identified that the improved model can provide a faster deploying time of AHLS.

• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.3-11
• /
• 2019

The recent earthquake of Pohang (M5.4) and the Gyeongju earthquake (M5.8) suggested the possibility of a strong earthquake in Korea and reminded us that the Korea is no longer an earthquake-safe zone. In the disaster recovery stage in a disaster like an earthquake, the investigation of the damage situation and the safety assessment of the building serve to provide important information for the initial action such as establishment of the recovery strategy and rescue of the survivor. However, the research that depends on manpower can not cope with the difficulty of processing a large number of doses in a short time, and the expertise of the manpower must be taken into consideration, which may result in delayed initial action. In this study, we propose an rapid safety evaluation technique of building using unmanned aerial vehicle which evaluates the performance and safety of buildings by integrating conventional safety inspection method with unmanned aerial vehicle technology and developed evaluation method of each evaluation factor. In order to verify this, the buildings damaged by the earthquake in Pohang were checked and compared using this system. The results are consistent with the results of the existing emergency earthquake risk assessment. As a result, the possibility of checking the emergency safety using the unmanned aerial vehicle for the damaged structures in case of a large-scale disaster such as an earthquake was confirmed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2202-2208
• /
• 2010

The railway in Korea has been one of important transportation means as the introduction of high-speed train and progress in subway systems. Also, as increases in the speed of train, the guarantee of safety becomes more important, especially, in the fields of railway vehicles and/or facilities. The structural health evaluation for the prevention and diagnosis of the accidents could be conducted using several types of nondestructive evaluation techniques such as ultrasonic developed using infrared thermography or optic fiber sensors. In this paper, the recent progress in structural health evaluation for railway systems has been introduced, and the case studies have been discussed.