• Composites Research
• /
• v.26 no.1
• /
• pp.29-35
• /
• 2013

Composite sandwich structure can improve the specific bending stiffness significantly and save the weight nearly 30 percent compared with the composite laminates. However, it has more inherent uncertainties of the material property caused by manufacturing process than metals. Therefore, the reliability-based probabilistic design approach is required. In this paper, the PMS(Probabilistic Margin of Safety) is calculated for the simplified fuselage structure made of composite sandwich to provide the probabilistic reasonable evidence that the classical design method based on the safety factor cannot ensure the structural safety. In this phase, the probability density function estimated by CMCS(Crude Monte-Carlo Simulation) is used. Furthermore, the RBDO(Reliability-Based Design Optimization) under the probabilistic constraint are performed, and the RBDO-MPDF(RBDO by Moving Probability Density Function) is proposed for an efficient computation. The examined results in this paper can be helpful for advanced design techniques to ensure the reliability of structures under the uncertainty and computationally inexpensive RBDO methods.

• Composites Research
• /
• v.31 no.4
• /
• pp.128-132
• /
• 2018

Multi-material design with metals and composites can keep structural functions as well as reduce the weight of automotive parts. However, recycling of automotive parts should be considered due to the increasing emphasis on the environments and pollutions. We derived the key issues for increasing the recycling rate of automotive parts by carrying out a survey targeting representatives and workers related with automotive recycling. The core of the key issues was the separation technology of adhesively bonded metal-composite hybrid structures, so we conducted the basic research and suggested the separation technology which can easily be adopted into the recycling industries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.467-474
• /
• 2010

Stainless steel sheets are widely used as the structural material for railroad cars and commercial vehicles. Structures made of stainless steel sheets are commonly fabricated by gas welding, For the fatigue design of gas welded joints such as fillet joints, it is necessary to obtain design information of the stress distribution at the weldment as well as the fatigue strength of the gas-welded joints. Further, the influence of the geometrical parameters of gas-welded joints on stress distribution and fatigue strength must be evaluated. in this study, ${\Delta}P-N_f$ curves were obtained by fatigue tests. and, the ${\Delta}P-N_f$ curves were rearranged on the basis of the ${\Delta}{\sigma}-N_f$ relation for the hot-spot stresses at the gas-welded joints. These results, were used for conducting an accelerated life test(ALT) From the experiment results, an acceleration model was derived and factors were estimated. The objective is to obtain the information required for the analysis of the fatigue lifetime of fillet welded joints and for data analysis by the statistic reliability method to save time and cost and to develop optimum accelerated life prediction plans.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.849-855
• /
• 2014

The GFRP composite is used for hot press flow molding of automotive components, and the different flow rates of fiber and plastic are likely to induce fiber orientation and inhomogeneity in the material. However, very limited systematic research studies are available on composite materials with superior flow homogeneity and optimized fiber orientation. The inhomogeneity and fiber orientation issues of GFRP composites have still not been resolved through research. The plain weaving method applied to the GFRP prepreg can improve its recyclability, inhomogeneity, fiber flow, structural stability, fiber deformation, surface smoothness, degree of impregnation, and other mechanical properties. The need for more detailed and thorough studies is evidenced.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.7
• /
• pp.669-674
• /
• 2013

A three-dimensional hydrogel scaffold has been proposed for the effective production of biomimetic intestinal villi to reduce ethical and cost problems caused by animal testing in pharmaceutical development. This study explores an experimental approach to develop a new technique based on laser machining and microdrilling processes to produce a plastic mold for the fabrication of a three-dimensional hydrogel scaffold. For process optimization, both the laser machining and the microdrilling experiments are conducted by varying the experimental conditions, and structural characterization of the mold and intestinal villi were performed using SEM (scanning electron microscope) and OM (optical microscope) images. Polycarbonate (PC) was used as a candidate material. The experimental results show that intestinal villi can be fabricated by both laser and microdrilling machining processes.

• Structural Engineering and Mechanics
• /
• v.65 no.2
• /
• pp.163-171
• /
• 2018

Plain concrete is a brittle material with a very low tensile strength compared to compressive strength and critical tensile strain. This study analyzed the dynamic characteristics of high-performance fiber-reinforced cementitious composites based on slurry-infiltrated fiber concrete (SIFCON-based HPFRCC), which maximizes the steel-fiber volume fraction and uses high-strength mortar to increase resistance to loads, such as explosion and impact, with a very short acting time. For major experimental variables, three levels of fiber aspect ratio and five levels of fiber volume fraction between 6.0% and 8.0% were considered, and the flexural strength and toughness characteristics were analyzed according to these variables. Furthermore, three levels of the aspect ratio of used steel fibers were considered. The highest flexural strength of 65.0 MPa was shown at the fiber aspect ratio of 80 and the fiber volume fraction of 7.0%, and the flexural strength and toughness increased proportionally to the fiber volume fraction. The test results according to fiber aspect ratio and fiber volume fraction revealed that after the initial crack, the load of the SIFCON-based HPFRCC continuously increased because of the high fiber volume fraction. In addition, sufficient residual strength was achieved after the maximum strength; this achievement will bring about positive effects on the brittle fracture of structures when an unexpected load, such as explosion or impact, is applied.

• Wind and Structures
• /
• v.29 no.6
• /
• pp.431-440
• /
• 2019

The aim of this study was to explore the influence of structure coupling effect on structural damping of blade based on the blade vibration characteristic. For this purpose, the scaled blade model of NREL 5 MW offshore wind turbine was processed and employed in the wind tunnel test to validate the reliability of theoretical and numerical models. The attenuation curves of maximum displacement and the varying curves of equivalent damping coefficient of the blade under the rated condition were respectively compared and analyzed by constructing single blade model and whole machine model. The attenuation law of blade dynamic response was obtained and the structure coupling effect was proved to exert a significant influence on the equivalent damping coefficient. The results indicate that the attenuation trend of the maximum displacement response curve of the single blade varies more obviously with the increase of elastic modulus as compared to that under the structure coupling effect. In contrast to the single blade model, the varying curve of equivalent damping coefficient with the period is relatively steep for the whole machine model. The findings are of great significance to guide the structure design and material selection for wind turbine blades.

• The Journal of the Korea Contents Association
• /
• v.16 no.4
• /
• pp.23-35
• /
• 2016

This study investigates the effects of authentic leadership and organizational supports on the organizational citizens behavior of public welfare facility employee. Structural equation model with four latent variables were constructed to test the hypothetical relationships between variables. Out of 230 people from welfare facilities in Yong-in City were sampled and 216 were answered the questionnaire. Results suggests that authentic leadership and organizational support perceptions were shown to have a positive(+) significant effects on the job engagement and organizational citizenship behavior. Authentic leadership and perceived organizational support are effected as a direct positive effect on job engagement, and the influence of perceived organizational support was recognized as greater fact than the authentic leadership. Variable 'job engagement' took a intermediating role between two independent variables and organizational citizenship behavior. Based on the hypothesis test results we might conclude that welfare facility employee whose task require emotional engagement need to be supported by systematic plan of material resources.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.338-344
• /
• 2015

The national competency standards (NCS) is a systematize and standardize for skills required to perform their job. The NCS has developed a learning module with materialization and standardize by competence unit element, which is the unit of specific job competency. The existing curriculum is material to gab analysis for use in education training with competence unit element. The existing gab analysis has evaluated subjectively by experts. The gab analysis by experts bring up a subject subjective decision, accuracy lack, temporal and spatial inefficiency by psychological factor. This paper is proposed automated evaluation model for problem resolve of subjective evaluation. This paper use index term extraction, term frequency-inverse document frequency for feature value extraction, cosine similarity algorithm for gab analysis between existing curriculum and competence unit element. This paper was presented similarity mapping table between existing curriculum and competence unit element. The evaluation model in this paper should be complemented by an improved algorithm from the structural characteristics and speed.

• Journal of the Korean Society of Costume
• /
• v.51 no.1
• /
• pp.5-20
• /
• 2001

The purpose of this study suggest the fashion of communication for 21th century fashion. Especially, Memphis fashion have the possibility of communicating through objects. The results of this study are as follows : First, Memphis idea is to make design into a sophisticated, conscious instrument of communication. As the Memphis fashion points out : design is an extraordinary tool for communicating because its intrinsic characteristic is the fact that it is used and distributed anyway, even without communicating anything. The Memphis fashion is trying to connect design and industry to the broader culture within which fashion moves. Second, Using different materials provides not only new structural Possibilities. but - above all - new semantic and metaphoric possibilities, order modes of communication, another language, and even a change of direction, broadening of perspective, appropriation and digestion of new values and the concomitant rejection of traditional structures that renewal always Involves. The memphis fashion works on the fabric of contemporaneity (lurex yarn, latex, chrome metal and steel) and contemporaneity means computers, electronics, a new awareness of the body. mass exercise and tourism. Third, color in Memphis has never been an ideological vehicle. As with decoration it is born tilth the design, forming an integral part of the structure. It alters the objects molecules. It works as a mass, as an intrinsic feature of a certain form and volume. The Memphis fashion was realized the introduction of ultramodern science into such experimental and creative implementation as optical motive, brilliancy of colour of electronic medium in audition to metallic fabric and high technical synthetic fiber. A color tilth pop culture connotations that weaver between technological allusions and Mcdonald's.