• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.474-479
• /
• 1998

In this paper, the structural behavior of R.C. multi-layered floor structure including foam concrete layer is numerically analyzed. For the analysis, 3D interface element has been implemented to finite element analysis program to consider the interfacial behavior of multi-layered floor structure which consists of rubber layer, foam concrete layer and mortar layer on RC slab. Based on analysis results on multi-layered structure, its structural behavior is analyzed according to geometrical and material properties of foam concrete. Optimum material property of each layer of the floor structure is proposed to get optimum multi-layered concrete structure.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.83-89
• /
• 1999

A seat frame structure in automotive vehicles made of polymer matrix composite to achieve weight reduction at low cost was developed. In order to design and manufacture the actual product studies on material selection and structural analysis were performed. Structural analysis was performed with a finite element method. The analysis was done for several cases suggested in various safety regulations. Each results was utilized to modify the actual shape to obtain a lighter, safer and more stable design. The final design was used to produce a sample bottom plate of the seat structure with reinforced by X-shape frame. Substitution of the material resulted in a weight reduction effect with equivalent strength fatigue and impact characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.76-79
• /
• 2000

The $Ba(Zn_{1/3}Ta_{2/3})O_3$ ceramics were prepared by conventional mixed oxide method. The structural properties of the BZT ceramics with the sintering temperature were investigated by XRD, SEM. The BZT ceramics have a complex-perovskite structure. The BZT ceramics sintered at $1550^{\circ}C$ had a superstructure plane of BZT(100). Increasing the sintering temperature, the bulk density and ordering were increased. The bulk density of the BZT ceramics sintered at $1550^{\circ}C$ was $7.50[g/cm^3]$. Increasing the sintering temperature, the average grain size were increased and pore were decreased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.311-318
• /
• 1995

Increases in strength and ductilities of steel fiber reinforced concrete(SFRC) under direct tension and compression result in improvements of flexural behavior of reinforced steel fibrous concrete beam(RSFCB) Use of hooked steel fibers in stead of round steel fibers enhances futher the structural porperties of a beam due to their greater mechanical bond resistance compared to that of round steel fibers. Flexural strength, initial stiffness ductility and failure mechani는 of RSFCB are dependent upon material and structural parameters and among which are the volume fraction of fibers, reinforcement ratio, and casting depth of SFRC in a beam section. The flexural behavior of RSFCB's are examined experimentally in this study and some conclusions are made regarding those effects of main material and structural parameters on the overall behavior of RSFCB.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.59-65
• /
• 2013

본 논문은 헬리컬 풍력터빈을 이용한 풍력터빈 나무의 구조적 안정성을 검토하는데 목적이 있다. 복합재료를 적용하여 헬리컬 로터 블레이드를 설계하였으며, 유한요소 해석을 통하여 안정성을 검토하였다. 또한 4개의 헬리컬 로터를 지지하고 있는 풍력터빈 나무에 대하여 풍압, 로터의 회전 그리고 자중을 고려한 구조해석을 수행하여 설계 타당성을 검토 하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.306-311
• /
• 2004

The sliding wear characteristics of the crane sheave were investigated using a pin-on-disk rig tester The experiment was conducted using a high carbon steel wire that was upper material, also carbon steel castings and carbon steel for machine structural use that was disk material. There are various operating conditions in this work. At the room temperature, we carried out the wear test under a grease lubrication. The results of wear test showed that carbon steel for machine structural use have lower wear volume, also the wear curves are linearly increased with increasing of sliding velocity The wear mechanism of a disk is the abrasive, adhesion, and fatigue wear under lubrication.

• Architectural research
• /
• 제10권1호
• /
• pp.1-11
• /
• 2008

A Steel column with damaged spray-applied fire resistive material (SFRM) may exhibit reduced structural performance due to the effects of elevated temperature during fire events. Thus, the fire load behavior of steel columns with removed or reduced SFRM needs to be examined to predict the structural damage by fire. FEM analyses were performed for the flange thinning removal models in which the SFRM was reduced as a constant strip in thickness at the top flange of the column. The temperature results for all models obtained from the heat transfer analyses were included as an initial condition in the FEM structural analyses. In this study, the results of analysis show that even small remnants of SFRM led to an effective reduction of temperature at any given fire duration, and improved significantly the axial load capacity of a column as compared to the complete removal cases of SFRM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.135-138
• /
• 2001

We report the structural ,optical and electrical properties of ZnO thin films depending on the variation of the film thickness. The properties of the films deposited on sapphire (001) substrates using a pulsed laser deposition technique (PLD) were characterized with XRD, hall measurement and photoluminescence (PL). In our study, the increase of the thickness of ZnO thin films shows the improvement of the structural and optical properties. The electric properties of the films were also well matched with the structural and optical properties

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.249-258
• /
• 2004

We investigated structural phases of potassium intercalated into carbon nanotubes using a structural optimization process applied to atomistic simulation methods. As the radius of carbon nanotubes increased, structures were found in various phases from an atomistic strand to multishell packs composed of coaxial cylindrical shells and in helical, layed, and crystalline structures. Numbers of helical atom rows composed of coaxial tubes and orthogonal vectors of a circular rolling of a triangular network could explain multishell phases of potassium in carbon nanotubes.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.40-45
• /
• 2008

본 연구는 항공구조재로 널리 사용되고 있는 AISI 304강에 대한 상온 및 고온 인장특성을 신뢰성 기법을 이용하여 실험한 결과를 정리한 것이다. 인장실험은 ASTM 규정에 의하여 수행하였고, 정규확률지를 이용하여 항공구조설계 시 적용할 수 있는 A-Basis 및 B-Basis 강도를 평가하는 신뢰성 해석을 수행하였다.