• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.5
• /
• pp.85-91
• /
• 2003

TLCD is a good alternative to TMD for control of structures because of its cost efficiency, ease of installation, little maintenance requirement, potential for multiple usage, and ease of re-tuning. In this study, the control performances of TMD and TLCD are evaluated and compared for seismically excited structures. Results show that TLCD is more effective than TMD for interstory drift control while TLCD is as effective as TMD for acceleration control. In special. it is shown that interstory drifts are maximally controlled in lower floors and accelerations are reduced most in upper floors. This indicates that TLCD is an effective controller for earthquake-induced structures in terms of structural safety as well as serviceability.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.2
• /
• pp.67-76
• /
• 2020

This study aims to optimize the cochlea-inspired artificial filter bank (CAFB) using El-Centro seismic waveforms and test its performance through a shaking table test on a two-span bridge model. In the process of optimizing the CAFB, El-Centro seismic waveforms were used for the purpose of evaluating how they would affect the optimizing process. Next, the optimized CAFB was embedded in the developed wireless-based intelligent data acquisition (IDAQ) system to enable response measurement in real-time. For its performance evaluation to obtain a seismic response in real-time using the optimized CAFB, a two-span bridge (model structures) was installed in a large shaking table, and a seismic response experiment was carried out on it with El-Centro seismic waveforms. The CAFB optimized in this experiment was able to obtain the seismic response in real-time by compressing it using the embedded wireless-based IDAQ system while the obtained compressed signals were compared with the original signal (un-compressed signal). The results of the experiment showed that the compressed signals were superior to the raw signal in response performance, as well as in data compression effect. They also proved that the CAFB was able to compress response signals effectively in real-time even under seismic conditions. Therefore, this paper established that the CAFB optimized by being embedded in the wireless-based IDAQ system was an economical and efficient data compression sensing technology for measuring and monitoring the seismic response in real-time from structures based on the wireless sensor networks (WSNs).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.100-108
• /
• 2016

The purpose of this study is to present a business strategy plan to increase organizational effectiveness of small and medium-sized enterprises. The research investigated in the level of human resource activity, such as recruitment, education, evaluation, compensation and development for the employees and executives who are working at small and medium-sized enterprises where located in Busan and Gyongnam province. With this, the research carried out actual proof analysis on the level of human resource activity effects on organization effectiveness like job satisfaction and organizational commitment. The following implications can be acquired from the result of multiple regression analysis on the 201 employees of small and medium enterprises. First, small and medium-sized enterprises should carry out human resource management activities and improve research and development capacity to enhance organization effectiveness. Second, in order to improve job satisfaction of the members of small and medium-sized enterprises, the management should concentrate on recruitment activity and reward maintenance management activity and come up with strategies to enhance learning ability and external network ability. Third, in order to enhance organizational commitment of the members of small and medium-sized enterprises, recruitment activity, training activity, and reward maintenance management activity should be carried out and the management should come up with strategies to enhance learning ability and external network ability. In this research, the objective was only to find out antecedents of organization effectiveness, but considering that causality might arise among the antecedents, in the studies hereafter, the verification on the structural relationship of various factors will be needed.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2064-2071
• /
• 2020

For proton pencil beam scanning (PBS) technology, the accuracy of the dose distribution in a patient is sensitive to the properties of the incident beam. However, mechanical deformation of the proton therapy facility may occur, and this could be an important factor affecting the proton dose distribution in patients. In this paper, we investigated the effect of deformation on an SC200 proton facility's beam isocenter properties. First, mechanical deformation of the PBS nozzle, L-shape plate, and gantry were simulated using a Finite Element code, ANSYS. Then, the impact of the mechanical deformation on the beam's isocenter properties was evaluated using empirical formulas. In addition, we considered the simplest case that could affect the properties of the incident beam (i.e. if only the bending magnet (BG3) has an error in its mounting alignment), and the effect of the beam optics offset on the isocenter characteristics was evaluated. The results showed that the deformation of the beam position in the X and Y direction was less than 0.27 mm, which meets the structural design requirements. Compared to the mechanical deformation of the L-shape plate, the deformation of the gantry had more influence on the beam's isocenter properties. When the error in the mounting alignment of the BG3 is equal to or more than 0.3 mm, the beam deformation at the isocenter exceeds the maximum accepted deformation limits. Generally speaking, for the current design of the SC200 scanning beam delivery system, the effects of mechanical deformation meet the maximum accepted beam deformation limits. In order to further study the effect of the incident beam optics on the isocenter properties, a fine-scale Monte Carlo model including factors relating to the PBS nozzle and the BG3 should be developed in future research.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.609-622
• /
• 2020

The purpose of this study is to examine the mediating effect of internalized shame and rejection sensitivity between parental psychological control, and displaced aggression in college students. For this purpose, 406 data samples were collected from the college students. SPSS was used for the analysis of descriptive statistics, reliability, correlation, AMOS for the evaluation of structural equation model and the mediating effect, and Mplus for the double mediating effect. Following is the summarization of the study. First, the displaced aggression has a positive relation with parental psychological control, internalized shame, and rejection sensitivity. Also, there were positive relations between internalized shame and parental psychological control, parental psychological control and rejection sensitivity, and internalized shame and rejection sensitivity. Second, internalized shame has a full mediation effect between parental psychological control and displaced aggression. Third, rejection sensitivity has not a mediation effect between parental psychological control and displaced aggression. Fourth, internalized shame and rejection sensitivity were identified as double mediation variables between parental psychological control and displaced aggression. This result inspires the college student's displaced aggression and can be useful in college student's counseling settings. Meanings, limitations and suggest for future research were discussed.

• Journal of Environmental Health Sciences
• /
• v.42 no.5
• /
• pp.302-313
• /
• 2016

Objectives: This study was conducted to assess environmental health status on a local scale using environmental health-related indicators. It demonstrated the possibility of using a structural equation model, a methodological approach to provide synthesized information. Methods: Eighteen indicators were selected from official statistical data published by local governments. Each environmental health-related indicator was classified according to the PSR (pressure-state-response) model. Aggregation methods were performed using principal component analysis and fuzzy sets. Results: The five principal components were classified through principal component analysis (PCA) and obtained eigenvalues >1.0 from the initial 18 indicators. The aggregated index was obtained by condensing the original information into two broad and simple categories through fuzzy sets. Conclusion: This could be useful in that the aggregation procedure may provide a basis for establishing environmental health policies and a decision-making process. However, the availability and quality of indicators, assessment of aggregation method bias, choice of weighted scores for indicators, and other factors should be examined in future studies.

• The korean journal of orthodontics
• /
• v.46 no.4
• /
• pp.220-227
• /
• 2016

Objective: The aim of this study was to translate the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) into Turkish, validate the questionnaire, and provide a cross-cultural adaptation. Methods: The translation process included the following steps, which were performed by a translation committee: (1) translation into Turkish, (2) back translation into English, (3) pretesting, and (4) cross-cultural adaptation. The Turkish version of the PIDAQ was produced subsequent to the translation process. Validity and reliability were measured using the Perception of Occlusion Scale and the aesthetic component of the Index of Orthodontic Treatment Need. The questionnaire was administered to 260 individuals (age range, 18-30 years; mean age, $20.50{\pm}1.9$ years). Structural validity was assessed via factor analysis, and internal consistency was measured using Cronbach's alpha coefficient. Results: Factor analysis revealed a four-factor structure, with factor loadings for included items ranging from 0.380 to 0.868. Few questions were shuffled among domains various factor loadings. Cronbach's alphas for the Turkish version of the PIDAQ ranged from 0.534 to 0.904. Mean scores for the PIDAQ subscale and total scores differed significantly according to Index of Orthodontic Treatment Need and Perception of Occlusion Scale scores. Conclusions: This study provided a Turkish version of the PIDAQ, which could be a useful tool in the evaluation of the psychosocial impact of malocclusion in young Turkish adults.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.21-27
• /
• 2015

In this study, interfacial characteristics between SOFC and Ag paste as current collector was estimated in the high temperature environment. The Ag paste was used to connect the unit cell of SOFC strongly with interconnector and provide the electrical conductivity between them. To confirm electrical conductivity, Ag paste was treated in the furnace at $800^{\circ}C$ for 48 hours. The sheet resistance of Ag paste was measured to compare the resistance values before and after the heat treatment. Also, the four-point bending test was performed to measure the interfacial adhesion. The unit cell of SOFC and $SiO_2$ wafer were diced and then attached by Ag paste. The $SiO_2$ wafer had the center notch to initiate a crack from the tip of the notch. The modified stereomicroscope combined with the CCD camera and system for measuring the length was used to observe the fracture behavior. To compare the characteristics before heat treatment and after heat treatment, the specimen was exposed in the furnace at $800^{\circ}C$ for 48 hours and then the interfacial adhesion was evaluated. Finally, the interfacial adhesion energy quantitatively increases $1.78{\pm}0.07J/m^2$ to $4.9{\pm}0.87J/m^2$ between the cathode and Ag paste and also increase $2.9{\pm}0.47J/m^2$ to $5.12{\pm}1.01J/m^2$ between the anode and Ag paste through the high temperature. Therefore, it is expected that Ag paste as current collector was appropriate for improving the structural stability in the stacked SOFC system if the electrical conductivity was more increased.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.4
• /
• pp.307-313
• /
• 2014

Recent interest in the increased structural performance and durability evaluation of this concrete structure in a salt damage environment is increasing. The most secure and reliable method of accelerated corrosion test is a method to carry out the rebar corrosion monitoring can be exposed directly to the marine test site exposure. However, long-term exposure testinghas the disadvantage that a long period is necessary. So, a lot of research on RC of salt damage environment have beenpromoted as alternatives to replace this. However, accelerated corrosion test, in the short term only is appropriate and is but an accelerated test method to evaluate the critical chlorine concentration, there is a difficult problem that you still get the answer. It is one of the correlation problems accelerated test correspond to a certain period of exposure environment. Therefore, in this study, to clarify the differences rebar corrosion beginning, through the actual corrosion accelerated test in corrosion time and laboratory test chamber of the structure of the marine environment results in both environments, it is an object of correlation coefficient derived.

• Korean Journal of Poultry Science
• /
• v.45 no.3
• /
• pp.209-217
• /
• 2018

The innate immune recognition is based on the detection of microbial products. Toll-like receptors (TLRs) located on the cell surface and the endosome senses microbial components and nucleic acids, respectively. Chicken TLRs mediate immune responses by sensing ligands from pathogens, have been studied as immune adjuvants to increase the efficacy of vaccines. Single nucleotide polymorphisms (SNPs) of TLR3 and TLR4 genes in chicken were associated with resistance and susceptibility to viral infection. In this study, SNPs of chTLR3 and chTLR4 genes were retrieved from public database and annotated with chicken reference genome. Three-dimensional models of the chTLR3 and chTLR4 proteins were built using a Swiss modeler. We identified 35 and 13 nsSNPs in chTLR3 and chTLR4 genes respectively. Sorting Intolerant from Tolerant (SIFT) and Polymorphism Phenotyping v2 (Polyphen-2) analyses, suggested that, out of 35 and 13 nsSNPs, 4 and 2 SNPs were identified to be deleterious in chTLR3 and chTLR4 gene respectively. In chTLR3, 1 deleterious SNP was located in ectodomain and 3 were located in the Toll / IL-1 receptor (TIR) domain. Further structural model of chTLR3-TIR domain suggested that 1 deleterious SNP be present in the B-B loop region, which is important for TIR-TIR domain interactions in the downstream signaling. In chTLR4, the deleterious SNPs were located both in the ectodomain and TIR domain. SNPs predicted for chTLR3 and chTLR4 in this study, might be related to resistance or susceptible to viral infection in chickens. Results from this study will be useful to develop the effective measures in chicken against infectious diseases.