• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.415-423
• /
• 2004

To investigate the long-term corrosion resistance of an uncoated weathering steel, an important outdoor constructional steel material, skyward surfaces of the weathering steel and a control steel initially exposed to rural and industrial atmospheres for 9 years were electrochemically tested in neutral artificial rain in terms of electrochemical potentials, impedances, and anodic potentiodynamic polarization curves. Their results were then discussed. A quite passive and stable rust layer to the artificial rain was well formed on the skyward surface of the weathering steel exposed to the industrial and rural atmospheres, and its corrosion rate in the artificial rain was measured to be about a low $3{{\mu}m}/y$. Continuous immersion of all the weathered surfaces in the artificial rain revealed the gradual degradation of the weathered corrosion layers on the steel, resulting in a cathodically controlled corrosion of the substrate steel by the electrochemical measurements. Alloy components of the weathering steel were found to retard the degradation of the weathered corrosion layers on the steel in the artificial rain. For better corrosion evaluation of the weathering steel, more electrochemical measurements of surfaces that have been exposed for more than 9 years to more closely simulated atmospheric waters are needed. These measurements are almost non-destructive and can provide online and in situ information on the corrosion rate, the development of corrosion and the conditions of rust layers on any interested surface and at any exposure time of the steel, so they can be effectively applicable to the corrosion evaluation of steel structures such as bridges, towers, and architectures by forming an electrochemical cell on an interested structural surface and by using a portable electrochemical instrument.

• The Korean Journal of Pharmacology
• /
• v.23 no.1
• /
• pp.25-31
• /
• 1987

The present study examines firstly, the inhibition of collagen gelation to explore the possible involvement of $Cu^{++}$-catalyzed peroxidation in rheumatoid arthritis and secondly, the effect of sodium salicylate on this peroxidative reaction to provide a possible explanation for its mechanism of anti-inflammatory action. Incubation of collagen obtained from rat skin with $Cu^{++}$ and $H_2O_2$ resulted in the inhibition of gelation in terms of maximal turbidity and lag phase, but either $Cu^{++}$ or $H_2O_2$ alone essentially gave no effect in the collagen gelation. In the presence of sodium salicylate the inhibited gelation of collagen induced by $Cu^{++}$ and $H_2O_2$ was reversed with the dependency of the concentration of sodium salicylate. Moreover, the rate of $H_2O_2$ decomposition by $Cu^{++}$ was accelerated by sodium salicylate and this decomposition of $H_2O_2$ was found to be saturable in terms of concentration of this drugs. Thus it can be expected that $Cu^{++}$ -catalyzed peroxidation attacks collagen resulting in change of structural or functional integrity of collagen, and sodium salicylate may act on this peroxidative process, possibly through the enhancement of catalatic action of $Cu^{++}$. From these results $Cu^{++}$-catalyzed peroxidation can be in part responsible for degradation of joint tissue in rheumatoid arthritis and sodium salicylate may exert its anti-inflammatory action by this peroxidative reaction.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.344-354
• /
• 2015

To investigate the effects of ionic liquid pretreatment on biomass, giant miscanthus was treated with 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) and 1-butyl-3-methylimidazolium acetate ([Bmim][OAc]) at three temperature conditions ($90^{\circ}C$, $110^{\circ}C$, and $130^{\circ}C$). As temperature condition increased, yield of the cellulose-rich product (CP) was reduced from 87.2% to 67.6%, while yield of the ionic liquid lignin (ILL) increased from 2.2% to 9.9%. Compared to the ILL, CP had lower carbon contents and higher oxygen contents. Enzymatic hydrolysis of CPs showed that conversion ratio of CP treated with [Emim][OAc] at $110^{\circ}C$ was 56.7%, the highest digestibility. Thermogravimetric analysis indicated that the maximum degradation rate decreased as temperature condition increased. In addition, maximum degradation temperature of ILL treated with [Emim][OAc] ranged from 274 to $279^{\circ}C$ which was lower than that of ILL treated with [Bmim][OAc]. Analytical date for ${\beta}$-O-4 linkage frequency in the ILL revealed that ${\beta}$-O-4 linkage frequency in the ILL decreased as the temperature rose. Furthermore, the highest S/G ratio of the ILL was determined to ca. 1.2 obtained from [Bmim][OAc] treatment at $110^{\circ}C$.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.3
• /
• pp.113-117
• /
• 2009

STATEMENT OF PROBLEM. Recently Yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) has been introduced due to superior flexural strength and fracture toughness compared to other dental ceramic systems. Although zirconia has outstanding mechanical properties, the phenomenon of decrease in the life-time of zirconia resulted from degradation in flexural strength after low temperature aging has been reported. PURPOSE. The objective of this study was to investigate degradation of flexural strength of Y-TZP ceramics after various low temperature aging treatments and to evaluate the phase stability and micro-structural change after aging by using X-ray diffraction analysis and a scanning electron microscope (SEM). MATERIAL AND METHODS. Y-TZP blocks of Vita In-Ceram YZ (Vita Zahnfabrik, Bad $S\ddot{a}ckingen$, Germany) were prepared in 40 mm (length) $\times$ 4 mm (width) $\times$ 3 mm (height) samples. Specimens were artificially aged in distilled water by heat-treatment at a temperature of 75, 100, 125, 150, 175, 200, and $225^{\circ}C$ for 10 hours, in order to induce the phase transformation at the surface. To measure the mechanical property, the specimens were subjected to a four-point bending test using a universal testing machine (Instron model 3365; Instron, Canton, Mass, USA). In addition, X-ray diffraction analysis (DMAX 2500; Rigaku, Tokyo, Japan) and SEM (Hitachi s4700; Jeol Ltd, Tokyo, Japan) were performed to estimate the phase transformation. The statistical analysis was done using SAS 9.1.3 (SAS institute, USA). The flexural strength data of the experimental groups were analyzed by one-way analysis of variance and to detect statistically significant differences ($\alpha$= .05). RESULTS. The mean flexural strength of sintered Vita In-Ceram YZ without autoclaving was 798 MPa. When applied aging temperature at below $125^{\circ}C$ for 10 hours, the flexural strength of Vita In-Ceram YZ increased up to 1,161 MPa. However, at above $150^{\circ}C$, the flexural strength started to decrease. Although low temperature aging caused the tetragonal-to-monoclinic phase transformation related to temperature, the minimum flexural strength was above 700 MPa. CONCLUSION. The monoclinic phase started to appear after aging treatment above $100^{\circ}C$. With the higher aging temperature, the fraction of monoclinic phase increased. The ratio of monoclinic/tetragonal + monoclinic phase reached a plateau value, circa 75% above $175^{\circ}C$. The point of monoclinic concentration at which the flexural strength begins to decrease was between 12% and 54%.

• Journal of Veterinary Clinics
• /
• v.30 no.3
• /
• pp.159-165
• /
• 2013

The present study was conducted to evaluate the efficacy of Cinnamomum cassia Blume (CC) extract on the repair of damaged cartilage in a rat model of osteoarthritis (OA) by anterior cruciate ligament transection (ACLT) and medial meniscus resection (MMx). Forty-eight rats were assigned to six groups (n = 8 per group): sham as negative control (NC), positive control (PC), diclofenac sodium (DS, 2 mg/kg), CC 25 mg/kg, CC 50 mg/kg and CC 100 mg/kg groups. Treatments were 12 weeks from 7 days after ACLT + MMx. Loss of cartilage and joint instability were significantly reduced in response to treatment with CC or DS compared to the PC (p < 0.05). CC significantly ameliorated cartilage degradation in a dose-dependent manner as assessed by histological findings (p < 0.01). A reduction in the severity of structural changes and a dose-dependent increase in Safranin-O staining intensity were observed in CC treatments, indicating that cartilage degradation was inhibited. Although DS did not affect the increase in active caspase-3 and cleaved poly(ADP-ribose) polymerase-induced apoptosis during the progression of OA, cells reactive to these apoptotic markers were decreased significantly by CC (p < 0.05). However, treatments with CC or DS did not influence the uptake of 5-bromo-2'-deoxyuridine. The findings suggest that CC can exert a chondroprotective action on OA through anti-inflammatory and anti-apoptotic properties.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.162-171
• /
• 2004

Crack sealing is a maintenance procedure that is commonly used to reduce pavement degradation. If cracks in pavements are not sealed, surface water penetration can reduce the strength of the sub-base layers, which can result in increased deflections of the pavement. Reduced strength of the sub-base also accelerates the deterioration of the surface, due to development of greater cracking and potholes. Crack sealing is performed to reduce water and debris penetration, thereby helping to maintain pavement structural capacity and limiting future degradation. The process of sealing cracks in pavements is however dangerous, costly, and labor-intensive operation. Labor turnover and training are increasing problems related to crack sealing crews, and as traffic volumes increase. Automating crack sealing can reduce labor and road user costs, improve work quality, and decrease worker exposure to roadway hazards. The main objective of this research is to develop an automated system for sealing cracks in pavement. Extension of the algorithms and tools presented in this research is also recommended for future study.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.4
• /
• pp.483-491
• /
• 2008

There has been much focus on the strong axis steel moment connections after the Northridge earthquake in 1994. However, research studieson the seismic behavior of weak axis moment connections could be hardly found despite the fact that these connection details have been frequently used as seismic details of MRF in Korea. Therefore, the objective of this research is to provide better knowledge on the seismic behavior of weak-axis steel moment connections, which can be widely applicable to many structures with similar characteristics. For this purpose, an experimental program was designed and performed with twotypes of weak-axis steel moment connections, namely the bracket type and WUF-B type, based on the survey of existing field data and literatures. Using the experimental results obtained from the quasi-static cyclic testing of these specimens, structural performances of the joints such as hysteretic curves, maximum strength capacities and the strain of reinforced bars were investigated. From the test results, the bracket-type connection was shown to have more than a 5% story drift capacity, compared with the WUF-B type connection's 4%. These specimens were also shown to have higher strength capacities than the nominal design strength. The bracket-type connection showed a slow strength degradation after maximum strength was researched. However,the WUF-B type connection showed a rapid strength degradation that caused brittle behavior.

• Clean Technology
• /
• v.25 no.1
• /
• pp.33-39
• /
• 2019

A.C (activated carbon) is mainly used to remove VOCs (volatile organic compounds), however, it has many problems such as fire risk due to increasing of adsorbent surface temperature during VOCs ad/desorption, increased cost by frequent replacement cycles requirement and performance degradation when containing moisture. In order to solve these problems, many researches, hydrophobic zeolite adsorbents, have been reported. In this study, $NH_4{^+}Y$-zeolite was synthesized with Y-zeolite through steam treatment and acid treatment, which is one of the hydrophobic modification methods, to secure high surface area, thermal stability and humidity resistance. The Y, Y-550-HN, Y-600-HN and Y-650-HN had adsorption capacities of $23mg\;g^{-1}$, $38mg\;g^{-1}$, $77mg\;g^{-1}$, $61mg\;g^{-1}$. The change of Si/Al ratio, which is an index to confirm the degree of modification, was confirmed by XRF (X-ray fluorescence spectrometer) analysis. As a result, the adsorbtion performance was improved when Y-zeolite modified, and the Si/Al ratio of Y, Y-550-HN, Y-600-HN, Y-650-HN were increased to 3.1765, 6.6706, 7.3079, and 7.4635, respectively. Whereas it was confirmed that structural crystallization due to high heat treatment temperature affected performance degradation. Therefore, there is an optimal heat treatment temperature of Y-zeolite, optimum modification condition study could be a substitute for activated carbon as a condition for producing an adsorbent having high durability and stability.

• Molecules and Cells
• /
• v.44 no.1
• /
• pp.26-37
• /
• 2021

Human papillomaviruses (HPVs) cause cellular hyperproliferation-associated abnormalities including cervical cancer. The HPV genome encodes two major viral oncoproteins, E6 and E7, which recruit various host proteins by direct interaction for proteasomal degradation. Recently, we reported the structure of HPV18 E7 conserved region 3 (CR3) bound to the protein tyrosine phosphatase (PTP) domain of PTPN14, a well-defined tumor suppressor, and found that this intermolecular interaction plays a key role in E7-driven transformation and tumorigenesis. In this study, we carried out a molecular analysis of the interaction between CR3 of HPV18 E7 and the PTP domain of PTPN21, a PTP protein that shares high sequence homology with PTPN14 but is putatively oncogenic rather than tumor-suppressive. Through the combined use of biochemical tools, we verified that HPV18 E7 and PTPN21 form a 2:2 complex, with a dissociation constant of 5 nM and a nearly identical binding manner with the HPV18 E7 and PTPN14 complex. Nevertheless, despite the structural similarities, the biological consequences of the E7 interaction were found to differ between the two PTP proteins. Unlike PTPN14, PTPN21 did not appear to be subjected to proteasomal degradation in HPV18-positive HeLa cervical cancer cells. Moreover, knockdown of PTPN21 led to retardation of the migration/invasion of HeLa cells and HPV18 E7-expressing HaCaT keratinocytes, which reflects its protumor activity. In conclusion, the associations of the viral oncoprotein E7 with PTPN14 and PTPN21 are similar at the molecular level but play different physiological roles.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.1
• /
• pp.34-41
• /
• 2022

As the use of chemical products increases in daily life, the removal of dye waste has also emerged as an important environmental issue. This dye waste can be decomposed using a photocatalyst, and the photocatalyst can be synthesized very cost-effectively by using the sol-gel technology. The sol-gel technology is not only very useful for nanoscale film formation, but also can simply form multilayer structures. Using a multiple spin coating method, in this study, a ZnO film with a multilayered structure (3 layers, 5 layers) was formed by using zinc oxide (ZnO), which is effective in decomposing various dyes. For performance comparison, a ZnO film having a single layer structure by a single spin coating method was prepared as a control. Structural and elemental analysis of ZnO film was performed using an X-ray diffraction analyzer and an energy dispersive X-ray spectrometer. A nanowire-like surface morphology could be observed through a scanning electron microscope. Additionally, UV-Vis spectrophotometer was used to measure the absorbance of UV light. The ZnO film with a five-layer structure degraded the simulated methylene blue by 49% more than the ZnO film with a single-layer structure. In conclusion, it was found that ZnO having a multilayered structure is useful as a photocatalyst that decomposes methylene blue dye more effectively.