• Steel and Composite Structures
• /
• 제16권2호
• /
• pp.203-220
• /
• 2014

Stress intensity factors are numerically investigated for interfacial edge crack between two dissimilar composite plates jointed with single side composite patch. Variation of stress intensity factor under Mode I loading condition is examined for different material models and fiber orientation angles of composite plates and patch. ANSYS 12.1 finite element analysis software is used to obtain displacements of crack surfaces in the numerical solution and repaired plates are modeled in three dimensions. Obtained results are presented in the form of graphs. It is found that fiber orientation angle of composites is an effective parameter on interfacial stress intensity factor.

• East Asian mathematical journal
• /
• 제36권5호
• /
• pp.583-591
• /
• 2020

In [8, 9] they introduced a new finite element method for accurate numerical solutions of Poisson equations with corner singularities. They consider the Poisson equations with corner singularities, compute the finite element solutions using standard Finite Element Methods and use the extraction formula to compute the stress intensity factor(s), then they posed new PDE with a regular solution by imposing the nonhomogeneous boundary condition using the computed stress intensity factor(s), which converges with optimal speed. From the solution they could get an accurate solution just by adding the singular part. The error analysis was given in [5]. In their approaches, the singular functions and the extraction formula which give the stress intensity factor are the basic elements. In this paper we consider the biharmonic problems with the cramped and/or simply supported boundary conditions and get the singular functions and its duals and find properties of them, which are the cornerstones of the approaches of [8, 9, 10].

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.961-967
• /
• 1999

A model is constructed to evaluate the mode III stress intensity factor(SIF) for orthotropic three-layered material with a center crack subjected to uniform anti-plane shear loading. A mixed boundary value problem is formulated by Fourier integral transform method and a Fredholm integral equation of the second kind is derived. The integral equation is numerically analyzed to evaluate the effects of the ratio of shear modulus, strength of each layer and crack length to layer thickness on the stress intensity factor.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.134-142
• /
• 2001

The integrals $J_k$(k=1,2) in the rectilinear anisotropis body in 2-D were determined using Lekhnitskii formalism. The relationship between $J_k$ and stress intensity factors are implified by the important equation between elastic compliance. The numerical evaluation of stress intensity factor for the single edge crack in mixed mode is determined by superposing known exact solutions.

• 한국가스학회지
• /
• 제4권1호
• /
• pp.33-39
• /
• 2000

긴 표면균열을 갖는 알루미늄합금(A5083)의 평판을 사용하여, 균열관통후의 응력확대계수를 검토하였다. 짧은 표면균열의 관통후에 제안된 식에 의하여 긴 표면균열 관통시의 평가는 균열종횡비가 적을수록 오차가 크게 되므로, 진전거동을 정확하게 평가하기 위해서는 수정이 필요하였다. 따라서 긴 표면균열 관통시의 종횡비를 고려하여, 응력확대계수의 평가식을 수정함으로써 관통후 고정도의 해석이 가능하였다.

• 전산구조공학
• /
• 제9권1호
• /
• pp.85-91
• /
• 1996

이 논문에서는 탄성-점탄성 복합재료의 공유면에 존재하는 계면균열에 대한 해석방법을 제시하고 있다. 먼저 탄성-점탄성 대응원리를 이용하여 탄성해석식으로부터 응력확대계수에 대한 식을 유도하였다. 다음으로 시간영역 경계요소법을 이용하여 균열선단에서의 응력을 계산한 다음 응력확대계수의 값을 구하였다. 수치해석의 결과는 본 논문의 정확성과 응용가능성을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.234-239
• /
• 2001

The stress intensity factors have been widely used in numerical studies of crack growth direction. However in many cases, omissive terms of the series expansion are quantitatively significant, so we consider the computation of such terms. For this purpose, we used the finite element method with isometric quadratic quarter-point elements. For examples, infinite square plate with a slant crack subjected to a uniaxial load is analyzed. The numerical analysis were performed for the wide range of crack tip element lengths and inclined angles. The numerical results obtained are compared with the theoretical solutions. Also they were accurate and efficient.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.261-266
• /
• 2003

The growth behavior of the transverse crack, which was one of the most dangerous damages of rail defects, was investigated under mode I and mixed mode loading in rail steel. In the case of variable amplitude loading, the fatigue crack growth behavior was discussed using characteristic stress intensity factor ranges ${\Delta}_{rms}$. In addition, characteristic comparative stress intensity factor ranges ${\Delta}_{V,rms}$ was proposed to evaluate the quantitative effects of the variable amplitude under mixed mode loading. As a result, crack growth rate under variable amplitude loading was faster than that under constant amplitude loading.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.806-812
• /
• 1988

본 연구에서는 상술한 바와 같이 광간섭에 의한 포성재료 및 초저온, 초고온 에 사용되는 재료의 응력확대계수 측정법에 대한 응용의 한 방법으로서 테프론 균열 주형법에 의한 인공열을 에폭시(epoxy)판으로 주형하고 레이저 간섭법에 의한 응력 확대계수의 측정을 시도하여 광소자(phototransistor)로 추적하기에 적당하고 선명한 간섭무늬를 얻을 수 있는 판사면 중심간의 구이를 실험적으로 결정하고 광탄성법에 의 한 실험결과와 비교하여 레이저 간섭법의 실용성을 확인하려고 한다.

• Structural Engineering and Mechanics
• /
• 제3권6호
• /
• pp.541-553
• /
• 1995

The determination of the stress intensity factors is investigated by using the surface integral defined around the crack tip of the structure. In this work, the integral method is derived naturally from the standard path integral J. But the use of the surface integral is also extended to the case where body forces act. Computer program for obtaining the stress intensity factors $K_I$ and $K_{II}$ is developed, which prepares input variables from the result of the conventional finite element analysis. This paper provides a parabolic smooth curve function. By the use of the function and conventional element meshes in which the aspect ratio (element length at the crack tip/crack length) is about 25 percent, relatively accurate $K_I$ and K_{II}$ values can be obtained for the outer integral radius ranging from 1/3 to 1 of the crack length and for inner one zero.