• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.49-58
• /
• 2018

Open-mode cracks could be commonly observed in layered rocks. A concept model is firstly used to explore the mechanism of the vertical cracks (VCs) in the top layer. Then the crack behaviour of the two-layer model is simulated based on a cohesive zone model (CZM) for layer interfaces and a plastic-damage model for rocks. The model indicates that the tensile stress normal to the VCs changes to compression if the crack spacing to layer thickness ratio is lower than a threshold. The results indicate that there is a threshold for interfacial shear strength that controls the crack patterns of the layered system. If the shear strength is lower than the threshold, the top layer is meshed by the VCs and interfacial cracks (ICs). When the shear strength is higher than the threshold, the top layer is meshed by the VCs and parallel cracks (PCs). If the shear strength is comparative to the threshold, a combining pattern of VCs, PCs and ICs for the top layer can be formed. The evolutions of stress distribution in the crack-bound block indicate that the ICs and PCs can reduce the load transferred for the substrate layer, and thus leads to a crack saturation state.

• Journal of Ecology and Environment
• /
• v.35 no.2
• /
• pp.73-78
• /
• 2012

$Calotropis$ $procera$ L. is a perennial shrub distributed in saline areas of deserts of South Asia. Salt stress is a very challenging subject in arid and semi-arid areas. Germination stage is very sensitive and many plants do not germinate in saline soil. The objective of this study was identifying the salinity effect on seed germination of $Calotropis$ $procera$ L. The experimental design was a complete randomized block design with NaCl and $CaCl_2$ at five levels of isobar concentrations: 0.0, -0.01, -0.05, -0.1, and -0.15 MPa. Osmotic potential had significant effects ($P$ < 0.01) on germination percentage, germination rate, shoot length, root length, and seedling dry weight. All seedling characteristics decreased with decrease in osmotic potential. Shoot length and root length decreased more than the seedling characteristics. Germination was completely inhibited in -0.1 Mpa. Priming with NaCl and $CaCl_2$ (-0.1 MPa) for four days had significant effects ($P$ < 0.01) on the germination percentages. Priming improved the seedling characteristics in all samples, especially in -0.05 Mpa, but a decrease with decrease in osmotic potential.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.213-219
• /
• 2003

Acoustic emission behavior during fatigue crack growth test was investigated under various loading condition. To describe the acoustic emission activity, counts rate (d/dn) was related with SIFR (stress intensity factor range, K). Results indicated that SIFR could be divided into two parts according to its relationship with counts rate. For $K<25_{MPa\sqrt{m}}$, counts rate was increased as the SIFR increased. However, for values greater than $25_{MPa\sqrt{m}}$ , decreasing behavior was shown. This behavior of counts rate corresponding SIFR was keeping the same trend regardless of load range or crack length. Acoustic emission response to the single overload was sudden drop and slow recovery in counts rate like crack growth retardation. Under variable loading condition, counts rate of each loading block was same as that of constant amplitude loading. Overall experimental data was somewhat scattered since sensitive characteristics of acoustic emission method. However, these empirical relations indicated that counts rate was uniquely correlate with single parameter, SIFR.

• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.132-137
• /
• 2010

Site-specific N application for corn is one of the precision crop management. To implement the site-specific N application, various nitrogen stress sensing methods, including aerial image, tissue analysis, soil sampling analysis, and SPAD meter readings, have been used. Use of side-dressing, an efficient nitrogen application method than a uniform application in either late fall or early spring, relies mainly on the capability of nitrogen deficiency detection. This paper presents map-based variable rate nitrogen application based using a multi-spectral corn nitrogen deficiency(CND) sensor. This sensor assess the nitrogen stress by means of the estimated SPAD reading calculated from the corn leave reflectance. The estimated SPAD value from the CND sensor system and location information form DGPS of each field block was combined into the field map using a ArcView program. Then this map was converted into a raster file for a map-based variable rate application software. The relative SPAD (RSPAD = SPAD over reference SPAD) was investigated 2 weeks after the treatments. The results showed that the map-based variable rate application system was feasible.

• Natural Product Sciences
• /
• v.12 no.4
• /
• pp.175-192
• /
• 2006

Screening for the cytotoxicity from plant origin is the first stage for anti-cancer drug development. A variety of terpenoids with exomethylene, epoxide, allyl, $\alpha,\beta-unsaturated$ carbonyl, acetylenes, and $\alpha-methylene-\gamma-lactone$ induces apoptosis and/or differentiation as well as cytotoxicity through the ROS signal transduction pathways. These are found among monoterpenes, sesquiterpenes, triterpenes, flavonoids, coumarins, diarylheptanoids, and even organosulfuric compounds. The most essential characteristics of natural cytotoxic substances is to possess the strong electrophilicity that is susceptible to nucleophilic biomolecules in the cell. Thiol-reductants and superoxide dismutase can block or delay apoptosis. Thus, ROS and the resulting cellular redox-potential changes can be parts of the signal transduction pathway during apoptosis. Disturbance of the balance of oxireduction by the pigment of natural quinones also caused the induction of the differentiation and apoptosis. Saponins with the cytotoxicity are restricted to their monodesmosides, rather than to bisdesmosides. Those saponins exhibited calcium ion-mediated apoptosis in addition to cytotoxicity whereas they showed also differentiation without extracellular calcium ion. The properties on cytotoxicity, apoptosis, and differentiation were assumed to depend on resultant oxidative stress to the cells. In this review, we describe a spectrum of cytotoxic compounds with various action mechanisms.

• Journal of Welding and Joining
• /
• v.29 no.4
• /
• pp.48-53
• /
• 2011

A thermal distortion analysis which takes strains directly as boundary conditions removed barrier of analysis time for the evaluation of welding distortion in a large shell structure like ship block. If the FE analysis time is dramatically reduced, the structure modeling time or the input-value calculating time will become a new issue. On the contrary to this, if the calculation time of analysis input-value is dramatically reduced and its results also are more meaningful, a little longer analysis time could be affirmative. In this study, instead of using inherent strain based on elastic analysis, a thermal strain based on elasto-plastic analysis is used as the boundary condition of weldments in order to evaluate the welding distortion. Here, the thermal strain at the weldment was established by using a stress-strain curve established from the test results. It is possible to automatically recognize the modeling induced-stiffness in the shrinkage direction of welded or heated region. The validity of elasto-plastic thermal distortion analysis was verified through the experiment results with various welding sequence.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.1
• /
• pp.36-43
• /
• 2014

Magnesium-protoporphyrin IX (Mg-PPn), which is formed through chelation of protoporphyrin IX (PPn) with Mg ion by Mg chelatase, is the first intermediate for the (bacterio)chlorophyll biosynthetic pathway. Interestingly, Mg-PPn provides peroxidase activity (approximately $4{\times}10^{-2}units/{\mu}M$) detoxifying $H_2O_2$ in the presence of electron donor(s). The peroxidase activity was not detected unless PPn was chelated with Mg ion. Mg-PPn was found freely diffusible through the membrane of Escherichia coli and Vibrio vulnificus, protecting the cells from $H_2O_2$. Furthermore, unlike photosensitizers such as tetracycline and PPn, Mg-PPn did not show any phototoxicity, but rather it protected cell from ultraviolet (UV)-A-induced stress. Thus, the exogenous Mg-PPn could be used as an antioxidant and a UV block to protect cells from $H_2O_2$ stress and UV-induced damage.

• Corrosion Science and Technology
• /
• v.16 no.2
• /
• pp.64-68
• /
• 2017

The interactions between corrosion pits on stainless steel under loading conditions are studied by using a cellular automata model coupled with finite element method at a mesoscopic scale. The cellular automata model focuses on a metal/film/electrolyte system, including anodic dissolution, passivation, diffusion of hydrogen ions and salt film hydrolysis. The Chopard block algorithm is used to improve the diffusion simulation efficiency. The finite element method is used to calculate the stress concentration on the pit surface during pit growth, and the effect of local stress and strain on anodic current is obtained by using the Gutman model, which is used as the boundary conditions of the cellular automata model. The transient current characteristics of the interactions between corrosion pits under different simulation factors including the breakdown of the passive film at the pit mouth and the diffusion of hydrogen ions are analyzed. The analysis of the pit stability product shows that the simulation results are close to the experimental conclusions.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.103-108
• /
• 2006

It has been well appreciated that reducing weld-induced deformation as law as possible is important during fabrication for a more efficient production of blocks. The weld-induced deformation is more serious in thin plates than in thick plates because heat affect zone of thin plates is wider than that of thick plates and in addition internal and external constraints much more influence upon weld-induced deformation of thin plates. This paper deals with the application of the mechanical tensioning method to butt weld of thin plates to reduce the weld-induced deformation. In order to investigate the quantitative effect of tensioning method upon the reduction of angular deformation and shrinkage in longitudinal and transverse direction of weld line, butt welding test have been carried out for several thin plate specimens with varying plate thickness and magnitude of tensile load. From the present experimental study, it has been found that the tensioning method is very effective on reduction of weld-induced residual stress as well as weld-induced deformation.

• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.55-64
• /
• 2010

Since various weathered soils are encountered in many domestic construction sites, it is necessary to estimate characteristics of natural weathered soils. However, the remolded sample of weathered soils are commonly used to estimate their characteristics because it is very difficult to sample weathered soils in undisturbed states. However, it is well known that the behavior of remolded sample is different from that of the undisturbed sample particularly in the dynamic response, because the particle structure of undisturbed sample maintains its original structure from the mother rock. Thus, to evaluate the influence of sampling method and preparation method on stress-strain behavior, the resonant column tests were performed on the block, tube samples, remolded samples with static compression and remolded samples with tamping of the weathered granite soils. The shear modulus of the remolded sample with tamping is larger than the other samples presumably due to the high tamping pressure enough to induce particle breakage. The tube samples show larger damping ratios than other samples. Furthermore, one-dimensional ground response analysis was performed to compare the results qualitatively.