• Journal of Korean Critical Care Nursing
• /
• v.16 no.3
• /
• pp.34-47
• /
• 2023

Purpose : Exercise may prevent the worsening of chronic kidney disease (CKD) and progression of cardiovascular diseases in patients with CKD. This review aims to identify the best type of exercise modality and summarizes the beneficial effects of exercise on physical and renal function among older adults with pre-dialysis CKD. Methods : A systematic search of PubMed, Embase, CINAHL, Cochrane Library, Web of Science, SCOPUS, and domestic database was performed for randomized controlled trials (RCTs) assessing the effect of exercise intervention on older adults with pre-dialysis CKD published until February 2023. A random-effects meta-analysis was conducted. The risk of bias was assessed using a Cochrane tool for assessing the risk of bias in RCTs (RoB 2.0). Results : The systematic review included 11 RCTs (n = 591, average age 60.2-76), of which 8 could be included for meta-analysis. Exercise was significant in increasing peak oxygen consumption and knee muscle strength among physical functions, and also in improving glomerular filtration rate among kidney functions. Conclusion : Exercise has beneficial effects on physical and renal function among older adults with pre-dialysis CKD. In the future, it is necessary to verify the effectiveness of exercise by subdividing it by type, intensity, duration, and delivery.

• Atmosphere
• /
• v.34 no.2
• /
• pp.97-106
• /
• 2024

The seasonal forecast skill of tropical cyclones (TCs) in the Northern Hemisphere from the Korea Meteorological Administration (KMA) Global Seasonal Forecast System version 6 (GloSea6) hindcast has been verified for the period 1993 to 2016. The operational climate prediction system at KMA was upgraded from GloSea5 to GloSea6 in 2022, therefore further validation was warranted for the seasonal predictability and variability of this new system for TC forecasts. In this study, we examine the frequency, track density, duration, and strength of TCs in the North Indian Ocean, the western North Pacific, the eastern North Pacific, and the North Atlantic against the best track data. This methodology follows a previous study covering the period 1996 to 2009 published in 2020. GloSea6 indicates a higher frequency of TC generation compared to observations in the western North Pacific and the eastern North Pacific, suggesting the possibility of more TC generation than GloSea5. Additionally, GloSea6 exhibits better interannual variability of TC frequency, which shows relatively good correlation with observations in the North Atlantic and the western North Pacific. Regarding TC intensity, GloSea6 still underestimates the minimum surface pressures and maximum wind speeds from TCs, as is common among most climate models due to lower horizontal resolutions. However, GloSea6 is likely capable of simulating slightly stronger TCs than GloSea5, partly attributed to more frequent 6-hourly outputs compared to the previous daily outputs.

• Korean journal of applied entomology
• /
• v.63 no.1
• /
• pp.77-80
• /
• 2024

Aedes albopictus, a common species in the Republic of Korea, is internationally known as a major vector for various diseases, and it is well-adapted to urban environments. Recent insect outbreaks in urban areas, attributed to climate change and urban heat islands, have increased the necessity of researching the effects on mosquito populations. This study analyzed climate data from 25 Automatic Weather System (AWS) stations in Seoul, identifying urban areas with pronounced heat island effects and suburban areas with milder effects. Nine urban heat island conditions were established based on this analysis, under which the hatching rates of Ae. albopictus were examined. The results revealed an increase in hatching rates correlating with the intensity of the urban heat island effect. Regression analysis further indicated that this trend accelerates as the strength of the heat island effect increases. This study suggests that temperature variations resulting from urban heat island phenomena can significantly influence the hatching rates of Ae. albopictus.

• Journal of The Korean Institute of Defense Technology
• /
• v.5 no.4
• /
• pp.9-15
• /
• 2023

In this study, electric field analysis was conducted for each process as a preliminary step in the design of the electrospinning device to apply the electrospinning PVDF nanofibers to increase the filtering effect of insect screens. In the electrospinning analysis using a single nozzle, it was confirmed that there was a decrease in the electrostatic field strength as the tip's size decreased, an increase in the voltage, and no effect depending on the TCD distance. In addition, it was confirmed that the closer the distance between tips, the more electric field interference occurs, and this was found to have a more significant effect on the tip located in the center with tips on both sides. Therefore, based on these analytical results, it is believed that an increase in production speed can be expected by establishing an efficient process line by confirming the radiating area of the collector and designing the spacing between multi-nozzles through actual experiments.

• Journal of the Korean earth science society
• /
• v.23 no.4
• /
• pp.357-368
• /
• 2002

In this study we have tried to explain the barrel-shaped morphology for young supernova remnants considering the dynamical effects of the ejecta. We consider the magnetic field amplification resulting from the Rayleigh-Taylor instability near the contact discontinuity. We can generate the synthetic radio image assuming the cosmic-ray pressure and calculate the azimuthal intensity ratio (A) to enable a quantitative comparison with observations. The postshock magnetic field are amplified by shearing, stretching, and compressing at the R-T finger boundary. The evolution of the instability strongly depends on the deceleration of the ejecta and the evolutionary stage of the remnant. the strength of the magnetic field increases in the initial phase and decreases after the reverse shock passes the constant density region of the ejecta. However, some memory of the earlier phases of amplification is retained in the interior even when the outer regions turn into a blast wave. The ratio of the averaged magnetic field strength at the equator to the one at the pole in the turbulent region can amount to 7.5 at the peak. The magnetic field amplification can make the large azimuthal intensity ratio (A=15). The magnitude of the amplification is sensitive to numerical resolution. This mens the magnetic field amplification can explain the barrel-shaped morphology of young supernova remnant without the dependence of the efficiency of the cosmic-ray acceleration on the magnetic field configuration. In order for this mechanism to be effective, the surrounding magnetic field must be well-ordered. The small number of barrel-shaped remnants may indicate that this condition rarely occurs.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.60-66
• /
• 1994

This study was conducted to determine the optimum conditions of inducing callus, proliferating callus, forming somatic embryos, and regenerating plantlets via somatic embryogenesis, for the purpose of producing artificial seeds and substantially developing plant factory technologies that can be employed to all seasons production of Bupleurum plants. Callus was efficiently induced from leaf tissues at three leaf stage in the MS medium supplemented with 2, 4-D 2mg /1 and thidiazuron(TDZ) 0.lmg /1. Callus induction from leaf tissues at maturity was mostly effective in the mixture of 2,4- D 2mg /1 and TDZ 1.0mg /1 while that from flower bud tissues was fairly good in the MS medium containing 2,4-D 1 or 2mg /1.Callus was formed in 15 to 20 days after culture initiation in the MS media supplemented with 2, 4- D 1-2mg /1 and TDZ 0.l-1.0mg /1. Such hormones as kinetin 3mg /1, GA 1mg /1, and the mixture of GA 1mg /1 and TDZ 1mg /1 effected markedly to proliferate the callus cells.The optimum temperature and light intensity for callus culture were found to be $25^{\circ}C$ and 3000 Lux, respectively. Direct plant regeneration from cultured callus was fairly made on hormone-free MS or half-strength MS medium. Somatic embryogenesis was most frequently observed in hormone-free media:60 somatic embryos per 20ml in MS medium and 28 somatic embryos per 20ml in half -strength MS medium. There were three stages-globular, heart, and torpedo-in development of somatic embryos, among which globular stage was more frequently observed in MS medium rather than in half-strength MS medium. Somatic embryos induced from suspension culture fairly differentiated a number of shoots and roots on hormone-free and half-strength MS solid medium.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.125-133
• /
• 2010

Objectives: Rapid polymerization of overlying composite resin causes high polymerization shrinkage stress at the adhesive layer. In order to alleviate the shrinkage stress, increasing the light intensity over the first 5 seconds was suggested as an exponential curing mode by an LED light curing unit (Elipar FreeLight2, 3M ESPE). In this study, the effectiveness of the exponential curing mode on reducing stress was evaluated with measuring microtensile bond strength of three adhesives after the overlying composite resin was polymerized with either continuous or exponential curing mode. Methods: Scotchbond Multipurpose Plus (MP, 3M ESPE), Single Bond 2 (SB, 3M ESPE), and Adper Prompt (AP, 3M ESPE) were applied onto the flat occlusal dentin of extracted human molar. The overlying hybrid composite (Denfil, Vericom, Korea) was cured under one of two exposing modes of the curing unit. At 48h from bonding, microtensile bond strength was measured at a crosshead speed of 1.0 mm/min. The fractured surfaces were observed under FE-SEM. Results: There was no statistically significant difference in the microtensile bond strengths of each adhesive between curing methods (Two-way ANOVA, p > 0.05). The microtensile bond strengths of MP and SB were significantly higher than that of AP (p < 0.05). Mixed failures were observed in most of the fractured surfaces, and differences in the failure mode were not observed among groups. Conclusion: The exponential curing method had no beneficial effect on the microtensile dentin bond strengths of three adhesives compared to continuous curing method.

• Journal of Technology Innovation
• /
• v.28 no.4
• /
• pp.1-26
• /
• 2020

Due to the spread of Corona 19 around the world, Infectious Disease Medicine and New Medical Devices such as Diagnostic Agent are being rapidly developed and launched, and for the fast supply and demand of these, each country has eased import regulations or has implemented policies for fast approval(NIDS, 2020). On the other hand, New Developed Medical Devices that are not related to New Infectious Diseases, they are still entering the market through strict licensing and licensing regulations, such as delay and cancellation in the test inspection process, etc. Therefore, This Study specialized in the government-managed laws encountered when New Medical Devices enter the market, derive Factors influencing the Strength of Regulations, analyzes the Strength of Regulations, and proposes a Regulatory Response Framework. The Research Method was conducted by Literature Research, was applied by Failure Mode and Effects Analysis(FMEA) Method, Expert Interview(1st): Idea Collection, Expert Interview(2nd): Validation, and Priority through the Application Process of FMEA Method. A Method of Quantifying the Intensity of Regulation was proposed by multiplying the Impact of the Influencing Factors for each stage of regulation and the Burden Impact for each type of Regulatory Affairs to find the Importance of the Regulatory Factors and multiplying the Severity of the Regulatory Impact. The Implications are that major overseas countries and the Korean government are actively responding with Special Regulatory Policies and Mitigation Policies for fast licensing of New Developed Medical Devices in accordance with Corona 19. It is expected that the direction for improvement of regulations and measures to respond to regulations will be implemented so that a more proactive and preemptive response to the regulatory process of the licensing policy for New Devices can be achieved.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.11-19
• /
• 2014

Purpose : To derive the most appropriate factors by considering the effects of the major factors when applied to the optimization algorithm, thereby aiding the effective designing of a ideal treatment plan. Materials and Methods : The eclipse treatment planning system(Eclipse 10.0, Varian, USA) was used in this study. The PBC (Pencil Beam Convolution) algorithm was used for dose calculation, and the DVO (Dose Volume Optimizer 10.0.28) Optimization algorithm was used for intensity modulated radiation therapy. The experimental group consists of patients receiving intensity modulated radiation therapy for the head and neck cancer and dose prescription to two planned target volume was 2.2 Gy and 2.0 Gy simultaneously. Treatment plan was done with inverse dose calculation methods utilizing 6 MV beam and 7 fields. The optimal algorithm parameter of the established plan was selected based on volume dose-priority(Constrain), dose fluence smooth value and the impact of the treatment plan was analyzed according to the variation of each factors. Volume dose-priority determines the reference conditions and the optimization process was carried out under the condition using same ratio, but different absolute values. We evaluated the surrounding normal organs of treatment volume according to the changing conditions of the absolute values of the volume dose-priority. Dose fluence smooth value was applied by simply changing the reference conditions (absolute value) and by changing the related volume dose-priority. The treatment plan was evaluated using Conformal Index, Paddick's Conformal Index, Homogeneity Index and the average dose of each organs. Results : When the volume dose-priority values were directly proportioned by changing the absolute values, the CI values were found to be different. However PCI was $1.299{\pm}0.006$ and HI was $1.095{\pm}0.004$ while D5%/D95% was $1.090{\pm}1.011$. The impact on the prescribed dose were similar. The average dose of parotid gland decreased to 67.4, 50.3, 51.2, 47.1 Gy when the absolute values of the volume dose-priority increased by 40,60,70,90. When the dose smooth strength from each treatment plan was increased, PCI value increased to $1.338{\pm}0.006$. Conclusion : The optimization algorithm was more influenced by the ratio of each condition than the absolute value of volume dose-priority. If the same ratio was maintained, similar treatment plan was established even if the absolute values were different. Volume dose-priority of the treatment volume should be more than 50% of the normal organ volume dose-priority in order to achieve a successful treatment plan. Dose fluence smooth value should increase or decrease proportional to the volume dose-priority. Volume dose-priority is not enough to satisfy the conditions when the absolute value are applied solely.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.3
• /
• pp.103-117
• /
• 2022

The recent corporate economy, such as the COVID 19 pandemic that has spread all over the world since the beginning of 2020, the acceleration of the 4th industrial revolution, and supply chain management risks triggered by the US-China conflict and the Ukraine crisis, is more serious than ever before. CEOs who have started and managed small and medium-sized enterprises (SMEs) are more concerned than ever about the sustainability of their businesses in this reality. Nevertheless, there were few empirical studies on the factors that influence the intention of SME CEOs to discontinue business. In this study, the perception of the business environment of SMEs (intensity of competition in key business areas, difficulty in manpower management), corporate competency (employee competency, company product or service competitiveness, supply chain and consumer relations, digital competency and technical expertise), and CEO's competency(trust between employees and the CEO, management competency and perceived health status of CEO) on CEO's intention to discontinue business was discussed. As a result of the study, the intensity of competition in the main business field, and the difficulty in manpower management had a positive (+) effect on the intention to discontinue the business, and the employee competency, product (service) competitiveness, digital competency of the company, and the CEO's Health status had a negative (-) effect on intention to discontinue business. The relationship between these influences was found in the order of CEO's health status, product competitiveness, employee competency, digital competency, competitive strength in the main business, and difficulty in manpower management. It was analyzed that supply chain and consumer relations, trust between employees and the CEO, and management capabilities did not significantly affect the intention to discontinue business. On the other hand, business confidence has a mediating effect between the intensity of competition in the main business field, the difficulty in manpower management, product or service competitiveness, digital competency, trust between employees and the CEO, and the management capability and intention to discontinue business was tested. This study had academic significance in that it empirically analyzed factors related to intention to discontinue business targeting small and medium-sized business CEOs. In practice, as it has been found that business environment awareness, corporate competency, managerial competency, and business confidence are factors that influence the intention to discontinue business, if an action ideas that can reinforce this part can be found, SMEs can achieve sustainable growth or it may help CEO find an meaningful exit.