• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2014

PURPOSES : The purpose of this study is to evaluate moisture susceptibility of a dense graded and an open graded asphalt mixtures by the method of AASHTO T-283. METHODS : To simulate moisture damage of asphalt pavements with continuously rainfall during summer rainy season, the dense graded and the open graded asphalt mixtures were immersed in water for 15 days and were measured the weight and the change of strength. Also, the mixtures were performed five freeze-thaw cycles to simulate moisture damage of the mixtures by freeze-thaw during winter and were measured the change of strength. The degradation characteristics model was used to analyze the relationship between strength and moisture damage. RESULTS : According to the results, the dense graded and the open graded asphalt mixtures were shown in the similar trends of the strength changes by immersion time and freeze-thaw cycle. However, the moisture damage reduction of open graded asphalt mixture was more sensitive in early phase than that of dense graded asphalt mixture.

• Women's Health Nursing
• /
• v.20 no.4
• /
• pp.297-308
• /
• 2014

Purpose: The purpose of this study was to review the effects of physical activity on musculoskeletal outcomes in older Koreans. Methods: Experimental studies were retrieved from the search engines (PubMed, CINAHL, PsycINFO, Cochrane, RISS, KISS, and KoreaMed). The selected studies for analysis were 27 articles of musculoskeletal outcomes (gait, muscle strength, flexibility, balance, grip strength, endurance, body fat, and weight) from 515 articles. Results: The most common type of physical activity was a resistance exercise. There were significant improvements in gait (71.4%), muscle strength (86.7%), flexibility (63.6%), balance (72.2%), grip strength (71.4%), endurance (71.4%), body fat (57.1%), and weight (28.6%). The activity programs that apply over 150 minutes a week showed greater improvement of 69.5% than 65.0% from those did not meet the guidelines totally. Conclusion: Based on the review, we conclude that regular physical activity in the elderly may improve the musculoskeletal outcomes. To be more effective programs, it is necessary to meet the guidelines of 150 minutes a week or 30 minutes of moderate-intensity activities on 5 days per week for the elderly.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.9-16
• /
• 1999

Generally, a speaker structures utterances very clearly by grouping words into phrases. This facilitates the listener's recovery of the meaning of the utterance and the speaker's intention. To this purpose, a speaker uses, among other things, prosodic information such as intonation pause, duration, intensity, etc. The research described here is concerned with the relationship between the strength of prosodic boundaries in spoken utterances as perceived by untrained listeners(Perceptual boundary strength, PBS)-In this paper, the preceptual boundary strength is used as the same meaning of the prosodic boundary strength-and prosodic information. We made a rule determinating the prosodic boundaries and verified the usefulness of the prosodic phrase as a recognition unit. Experiments results showed that the performance of speech recognition(SR) is improved in aspect of recognition rate and time compared with that using sentences as recognition unit. In the future we will suggest the methods that estimate more appropriate boundaries and study more various methods of prosody assisted SR.

• Transactions of Materials Processing
• /
• v.10 no.2
• /
• pp.101-110
• /
• 2001

The thermal problem of press work is classified into two cases. First, the temperature of forming die passively rises due to the heating effect of plastic deformation. The warm forming is the second case in which the external heating is applied to the die and blank holder. So, the purpose of this study is to provide database for the forming characteristics at various temperature conditions. In this study, the tensile test was carried out for the commercial steel sheets such as SCPI and SCP3C with the thickness of 0.7mm and 1.4mm respectively. The tensile strength, total elongation, Lankford value and the flow curve have been obtained at the temperature of $25^{\circ}C$, $50^{\circ}C$, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$ and $300^{\circ}C$, respectively. From the results, we can see that both the tensile strength and total elongation decrease as the temperature increases. In the light of anisotropy, the effect of thickness is dominant than the material specs. For the temperature dependency of flow curves, there are only small differences for the work-hardening exponent, and the strength intensity decreases monotonically as temperature increases. The present results we useful as input data for the analysis of sheet metal forming processes with the various temperature conditions.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.151-158
• /
• 2018

Objective: In this study, we analyzed kinematic changes in the start phase of speed skating before and after physical training. Method: We introduced a new strength training program (2017) that was improved in terms of exercise type and intensity [%, one repetition maximum (1RM)] compared with the previous strength training program (2016). The new program was applied to elite speed skating athletes (four males and four females). To determine the improvement in starting technique, we recorded race images during the start phase of the 500-m race held in 2016 and 2017. The race images were collected using five high-speed cameras and kinematic characteristics of the start phase were analyzed by three-dimensional image analysis. Results: The 1RMs were improved by 11% on an average after the strength training. In 2017, records of four out of the eight athletes were shortened in terms of the initial lap time (100 m), and 500-m records were shortened in six athletes. The time to nine strokes was shortened in five athletes, and the ratio of correct kinetic chain was increased or maintained at a high level in six athletes. Conclusion: In this study, the new strength training program (2017), applied to elite speed skating athletes, showed a positive effect on starting technique and reduced the record times.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.1
• /
• pp.1-6
• /
• 2014

The copper deposit on steel plate was prepared by pyrophosphate copper plating solution made with variation of inorganic additive. $NH_4OH$ and $NH_4NO_3$ were used as inorganic additives. The copper layer characteristics - tensile strength, crystallite size and crystal orientation - were evaluated by X-ray diffraction and Universal Test Machine. The presence of ammonium nitrate results in reduction of average roughness value from $0.08{\mu}m$ to $0.03{\mu}m$. In pyrophosphate copper plating solution without Inorganic additive, tensile strength of electrodeposit copper foil was reduced from 600 MPa to 180 MPa after 7 days aging. However, when adding ammonium nitrate, there was almost no change of tensile strength, intensity of crystal orientation - (111), (200) and (220) - and crystallite size (2~30 nm).

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.37-42
• /
• 2006

Researches to preserve and restore the remaining fabrics as costume heritages have been carried out. In this study, in order to artificially restore an excavated silk fabrics, degummed silk fabrics and safflower dyed silk fabrics were prepared for an experiment. These fabrics were photo-degraded by the Xenon arc beam to have various strength retention(100%, 80%, 60%, 40%, 20%). The fine structure and physical properties of Xenon arc treated fabrics were investigated with various techniques such as tensile test, weight loss, wide-angle X-ray diffraction, yellowness, color, SEM etc. Tensile strength and the crystal diffraction intensity of silk fabrics decreased as Xenon arc hem treatment time increased. Weight loss increased slightly. Strength retention was decreased as the Xenon arc beam treatment time goes by. (Yellowness of the undyed silk fabrics and $L^*$ of the dyed silk fabrics increased. Whiteness of the undyed silk fabrics and $b^* of the dyed silk fabrics decreased.) SEM results of the silk fabrics treated Xenon arc beam show that surface was a little damaged.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.169-170
• /
• 2015

This study is the experiment for manufacturing the Lightweight non-cement matrix based on the blast furnace slag, paper ash. Materials like cement and blowing agent in foamed concrete is replaced by by-products fro blast furnace slag and paper ash. Further, the experiment was performed by replacing alkali with nature gypsum and α type gypsum by (0, 5, 10, 15, 20) of weight of alkali (wt.%) in order to reduce the amount of expensive alkali-activator. Consequently, in the case of the density, plain showed the lowest density and it seems that specimen adding nature gypsum 5% has the best compressive strength and flexural strength. It is detemined that the strength is lowered in accordance with the α type gypsum replacement ratio is higher. The research that it can supplement the further intensity seems to be needed.

• Journal of Oral Medicine and Pain
• /
• v.48 no.3
• /
• pp.87-95
• /
• 2023

Purpose: To quantify the relationship between perceived pain intensity and psychological variables in a sample of participants with temporomandibular disorder, with or without central sensitization (CS). Methods: A cross-sectional study with nonprobability convenience sampling was conducted from January 1, 2022, to June 30, 2023. Pain intensity (Numeric Pain Rating Scale), anxiety (State-Trait Anxiety Questionnaire, STAI), catastrophizing (Pain Catastrophizing Scale, PCS), perceived stress (Perceived Stress Scale, PSS), and sleep quality (Pittsburgh Sleep Quality Index, PSQI) were assessed. Statistical analysis was performed using IBM SPSS Statistics for Windows, Version 20.0 (IBM Co.), which included descriptive and normality analyses and the calculation of strength of multiple correlational regression. Results: A total of 52 (n=34 female 65.4%; n=18 male 34.6%) subjects with diagnosis of temporomandibular disorders (TMD) were finally included. A total of 26 participants (n=26, 50.0%) were cases suffered from CS (TMD-CS mean=46.62±11.24) while the remaining participants (n=26, 50.0%) were the controls (TMD-nCS mean=26.77, standard deviation [SD]=8.42). The pain intensity was moderate in both groups TMDCS (mean=7.62, SD=0.83) and TMD-nCS (mean=7.05, SD=0.86), anxiety (TMD-CS STAI mean=53.27, SD=11.54; TMD-nCS STAI mean=49, SD=11.55), catastrophizing (TMD-CS PCS mean=46.27, SD=9.75; TMD-nCS PCS mean=26.69, SD=4.97), perceived stress (TMDCS PSS mean=30.35, SD=4.91; TMD-nCS PSS mean=26.12, SD=6.60) and sleep quality (TMD-CS PSQI mean=15.81, SD=3.65; TMD-nCS PSQI mean=12.77, SD=2.76) levels were measured in both groups. In TMD-CS and TMD-nCS, higher anxiety levels were moderately and significantly associated with greater pain intensity β=0.4467 (t=2.477, p=0.021) and β=0.5087 (t=2.672, p=0.014). Nevertheless, catastrophizing, perceived stress and sleep quality were not associated to pain intensity in neither of group. Conclusions: In both TMD-CS and TMD-nCS patients, elevated anxiety levels were moderately and significantly associated with increased pain intensity. However, heightened levels of pain catastrophizing, perceived stress, and poor sleep quality were not significantly associated with increased pain intensity in either of the two analyzed groups.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.268-275
• /
• 2000

We investigated the effect of polymer sublayer on volumetric resistivity and tensile strength of carbon fiber (CF)/polyethylene composite films fabricated under high intensity electric fields. The dependence of volumetric resistivity and tensile strength of the films on the polymer sublayer thickness or mass part exhibited complex behavior according to CF content and CF layer density in the films. As the thickness of polymer sublayer increases, two groups of processes at thermo-mechanical forming stage would take effects in the properties of the films. The first group comprises the increase of polymer layer thickness having reduced CF content compared with central or upper part of the film and insufficient wetting of CF resulting in the loosened structure near upper film side. The second group, on the other hand, is the improvement of mobility of molten sublayer leading to better distribution of CF throughout the film thickness and the formation of more compact structure. The different degree of contribution of these two competing processes at varied CF content and CF layer density could explain complex dependence of the film properties on the polymer sublayer. These results are important to optimize the electrical and mechanical properties of highly conductive polymer films, which can be used as electromagnetic interference shielding materials.