• 제목/요약/키워드: strength increment

검색결과 346건 처리시간 0.036초

A study on mechanical properties of concrete including activated recycled plastic waste

  • Ashok, M.;Jayabalan, P.;Saraswathy, V.;Muralidharan, S.
    • Advances in concrete construction
    • /
    • 제9권2호
    • /
    • pp.207-215
    • /
    • 2020
  • This paper describes the experimental studies carried out to determine the properties of fresh and hardened concrete with Recycled Plastic Waste (RPW) as a partial replacement material for fine aggregates. In the experimental study, RPW was used for replacing river sand and manufactured sand (M sand) aggregates in concrete. The replacement level of fine aggregates was ranging from 5% to 20% by volume with an increment of 5%. M40 grade of concrete with water cement ratio of 0.40 was used in this study. Two different types of RPW were used, and they are (i) un-activated RPW and (ii) activated RPW. The activated RPW was obtained by alkali activation of un-activated RPW using NaOH solution. The hardened properties of the concrete determined were dry density, compressive strength, split tensile strength, flexural strength and ultrasonic pulse velocity (UPV). The properties of the concrete with river sand, M sand, activated RPW and un-activated RPW were compared and inferences were drawn. The effect of activation using NaOH solution was investigated using FT-IR study. The micro structural examination of hardened concrete was carried out using Scanning Electron Microscopy (SEM). The test results show that the strength of concrete with activated RPW was more than that of un-activated RPW. From the results, it is evident that it is feasible to use 5% un-activated RPW and 15% activated RPW as fine aggregates for making concrete without affecting the strength properties.

횡보강근이 없는 40, 60 MPa 콘크리트에서 철근 압축이음의 거동과 강도 (Behavior and Capacity of Compression Lap Splice in Unconfined Concrete with Compressive Strength of 40 and 60 MPa)

  • 천성철;이성호;오보환
    • 콘크리트학회논문집
    • /
    • 제21권3호
    • /
    • pp.291-302
    • /
    • 2009
  • 현행 기준식에 따르면 초고강도콘크리트에서는 철근 인장이음길이보다 압축이음길이가 더 길어지는 현상이 발생된다. 초고강도콘크리트의 경제적 실용화를 위해 합리적인 압축이음강도의 평가가 필요하다. 이를 위해 압축이음의 거동 특성을 분석하고 영향인자를 도출하였으며, 설계강도 40, 60 MPa 콘크리트에 대한 압축이음 실험을 수행하였다. 압축이음강도는 부착과 지압으로 구성되고, 부착과 지압의 복합 거동에 의해 발현되므로, 압축이음 거동특성 및 강도평가를 위해서는 부착과 지압이 함께 존재하는 상태에서의 연구가 수행되어야한다. 인장이음과 달리 압축이음은 이음길이가 짧고 지압의 존재로 인해 콘크리트 강도의 영향이 크다. 실험결과 압축이음강도는 콘크리트의 제곱근에 비례하는 것으로 평가되었다. 부착과 지압 모두 주변 콘크리트의 응력상태에 따라 결정되는데, 콘크리트의 축방향 응력이 높기 때문에 철근 순간격 증가에 따른 이음강도 증가는 거의 없다. 지압강도는 이음길이와 철근 순간격에 무관하며, 콘크리트 강도의 제곱근의 함수로 표현할 수 있다. 파괴양상이 측면파열파괴와 유사하므로 지압강도는 앵커의 측면파열파괴 강도식을 활용하여 평가가 가능하다. 부착에 의해 발현되는 강도는 인장이음의 경우와 유사하므로, 인장이음강도에 비해 향상된 압축이음강도는 단부 지압효과로 설명될 수 있다.

안전계수 변화를 고려한 사면거동의 3차원 분석기법 연구 (3-Dimensional Analysis of Slope Behavior with Varying Safety Factor)

  • 한희수;백용;조재호;황찬규
    • 한국지반환경공학회 논문집
    • /
    • 제11권4호
    • /
    • pp.19-24
    • /
    • 2010
  • 사면의 거동에 관한 종래의 해석 기법은 사면거동을 시간과 변위의 2차원 크리프로 해석하는 것이었으나, 이러한 해석 기법은 강우에 의한 응력변화를 고려 않고 시간에 따른 변위만을 고려하여, 강우 시 사면의 거동 및 붕괴를 설명하지 못한다. 또한 강우에 의한 이력현상으로 인해 파괴면내의 전단에너지가 감소한다. 크리프 해석은 응력항을, 이력현상 해석은 시간항을 무시한 해석이므로, 두 가지 해석을 결합하여, 사면의 거동을 해석한다면, 응력변화, 변위 및 시간을 모두 고려한 실제 사면의 거동해석이 됨을 알 수 있다. 그러나 응력변화에 관한 항은, 강우로 인한 실제 사면의 침투 및 배수 시, 전단응력의 변화 및 전단강도의 변화를 동시에 유발하므로, 이 두 항을 동시에 고려할 수 있는 안전계수항으로 바꾸어야 한다. 본 논문은 강우의 지반침투 및 배수로 인하여 사면의 단위중량이 변하는 과정에 대한 크리프와 이력현상을 고려할 수 있는 결합해석으로 고찰하고 이에 따른 사면붕괴에 관한 전단응력과 전단강도의 변화 및 안전계수변화를 3차원으로 나타내고자 수행한 결과이다.

황(黃)-고무 콘크리트의 역학적(力學的) 특성(特性)과 최적배합비(最適配合比)에 관한 연구(硏究) (Experimental study on Mechanical Properties and Optimum Mix Design of Sulfur-Rubber Concrete (SRC))

  • 나옥빈;이재승
    • 자원리싸이클링
    • /
    • 제22권1호
    • /
    • pp.20-28
    • /
    • 2013
  • 국내 자동차 사용이 증가하면서 폐타이어의 재활용에 대한 관심이 고조되고 있다. 폐타이어의 재활용을 위한 처리방법중 분말가공 형태는 25%로서 건설현장에서 다양하게 사용되고 있다. 본 연구에서는 황과 폐타이어를 이용한 콘크리트(SRC: Sulfur-Rubber Concrete)의 물리적 특성을 파악하여 최적배합비를 제안하는데 그 목적이 있다. 이를 위해 황과 폐타이어의 배합양을 달리하여 압축강도 실험을 수행하였다. 더불어 SRC의 제작과정을 2개의 배합방법(건조배합과정 및 습윤배합 과정)에 따라서 각각 그 특성을 평가하였다. 그 결과 고무의 혼입률이 증가할수록 SRC의 압축강도는 감소함을 알 수 있었으며, 마이크로 충진재의 첨가와 황 혼입률 조절은 압축강도를 향상시켰다. 또한 SRC의 황의 혼입률을 조절하여 강도의 최적값을 제안하였다. 이러한 SRC는 도로포장이나 경량벽체 또는 충격에너지 흡수율이 높은 건설 분야에 적용될 수 있을 것으로 판단된다.

Estimation on clamping load of high strength bolts considering various environment conditions

  • Nah, Hwan-Seon;Choi, Sung-Mo
    • Steel and Composite Structures
    • /
    • 제24권4호
    • /
    • pp.399-408
    • /
    • 2017
  • Of high strength bolts, the torque shear type bolt is known to be clamped normally when pin-tails are broken. Sometimes the clamping loads on slip critical connections considerably fluctuate from the required tension due to variation of torque coefficient. This is why the viscosity of lubricant affects the torque coefficient by temperature. In this study, the clamping tests of high strength bolts were performed independently at laboratory conditions and at outdoor environment. The temperatures of outdoor environment candidates were ranged from $-11^{\circ}C$ to $34^{\circ}C$ for six years. The temperature at laboratory condition was composed from $-10^{\circ}C$ to $50^{\circ}C$ at each $10^{\circ}C$ interval. At outdoor environment conditions, the clamping load of high strength bolt was varied from 159 to 210 kN and the torque value was varied from 405 to 556 Nm. The torque coefficients at outdoor environment were calculated from 0.126 to 0.158 when tensions were measured from 179 to 192 kN by using tension meter. The torque coefficients at outdoor environment conditions were analyzed as the range from 0.118 to 0.152. From these tests, the diverse equations of torque coefficient, tension dependent to temperature can be acquired by statistic regressive analysis. The variable of torque coefficient at laboratory conditions is 0.13% per each $1^{\circ}C$ when it reaches 2.73% per each $1^{\circ}C$ at outdoor environment conditions. When the results at laboratory conditions and at outdoor environment were combined to get the revised equations, the change in torque coefficient was modified as 0.2% per each $1^{\circ}C$ and the increment of tension was adjusted as 1.89 % per each $1^{\circ}C$.

시멘트계 고화재를 활용한 농어촌도로 포장공법 개발 (Development of Rural Road Pavement Technology Using Cement Stabilizer)

  • 오영인;공길용;김승욱
    • 한국도로학회논문집
    • /
    • 제9권4호
    • /
    • pp.171-184
    • /
    • 2007
  • 화학적 첨가제를 이용한 안정처리는 지반의 강도증가 및 변형발생을 제어하기 위한 방법으로 깊은 심도까지 광범위하게 적용되어 지고 있다. 화학적 안정처리의 기본목적은 지반의 강도증가, 압축성 감소, 팽창특성 등을 개선하여 지반의 내구성을 증가시키는 것이며, 최근 들어 환경친화적이며 혼합체의 특성 및 혼합속도를 효율적으로 개선한 다양한 형태의 진보적인 시멘트 혼화재가 개발되고 있다. 본 연구에서는 농어촌도로(농도)의 효율적인 포장공법 개발을 위하여 시멘트혼화재를 활용하는 방안을 연구하였으며, 혼화재 종류 및 배합비에 따른 다짐시험, 일축압축강도시험, 동결융해시험 및 휨강도시험을 실시하였다. 본 연구결과에 따르면, 실트질 원지반토가 점토지반에 비해 강도증가 및 동결융해특성이 우수하며, 액상형 시멘트 혼화재가 분말형태 보다 효과적인 것으로 나타났다. 또한 저배합에서도 고강도의 품질을 발휘하여 농어촌도로 표층 내구성 저하를 개선할 수 있을 것으로 판단된다.

  • PDF

세립분 함유량에 따른 동결 사질토의 응력-변형률-강도 특성 (Stress-Strain-Strength Characteristics of Frozen Sands with Various Fine Contents)

  • 채덕호;황범식;조완제
    • 한국지반환경공학회 논문집
    • /
    • 제16권6호
    • /
    • pp.31-38
    • /
    • 2015
  • 최근 우리나라는 러시아 극동 지역의 천연파이프 건설과 제2남극기지인 장보고 기지건설이 이루어지면서 영구동토지반에서의 구조물 건설에 대한 관심이 증대되고 있다. 세립분 함유량이 동결된 사질토의 역학적 거동에 미치는 영향을 파악하기 위하여 온도 -5, -10, $-15^{\circ}C$의 조건에서 세립분 함유량 0, 5, 10, 15%의 시료에 대해 일축압축시험을 수행하였다. 동결 사질토를 성형하기 위해 입도가 균일한(SP) 주문진 표준사와 소성성이 낮은 실트(ML)인 카올리나이트를 사용하였다. 성형된 동결 사질토를 사용하여 온도를 제어할 수 있는 냉동 체임버에서 일축압축실험을 수행하였고 강도 및 강성특성을 파악하기 위해 최대 일축압축강도와 변형계수를 분석하였다. 그 결과 동결 사질토의 강도 및 강성은 세립분 함유량이 증가할수록 감소하는 경향을 보이고 온도가 낮아짐에 따라 증가하는 경향을 보였다.

Fermented Whey Protein Supplementation Improves Muscular Strength, Muscle Parameters, and Physical Performance in Middle-Aged Korean Adults: An 8-Week Double Blind Randomized Controlled Trial

  • Cheol Hyun Kim;Yu Bin Jeon;Dong Gyu Yoo;Ki-Hong Kim;Hwan-Jong Jeong;Byung-Kwan Kim;Mi-Houn Park;Ki-Hwan Kim;Joon-Ho Hwang;Gun Hee Cho;Sung-Kyu Kim;Ki-Woong Lee;Sung-Han Kim
    • 한국축산식품학회지
    • /
    • 제43권3호
    • /
    • pp.512-530
    • /
    • 2023
  • The present study evaluated the effects of fermented whey protein using kimchi lactic acid bacteria Lactobacillus casei DK211 on skeletal muscle mass, muscle strength, and physical performance in healthy middle-aged males performing regular resistance exercises. Effective protein supplementation and regular exercise are two important factors for improving muscle health. Therefore, in this study, the effects of consuming fermented whey protein twice a day were investigated and compared with that of non-fermented supplementation. Forty-eight males (average age 44.8) were randomly assigned to two groups: Fermented whey protein supplementation (FWPS) and non-fermented whey protein concentration supplementation (WPCS) groups. Each group ingested 37 g of FWPS or WPCS twice a day for eight weeks. Body composition, muscle strength, and physical performance were assessed pre- and post-intervention. Independent t-tests or chi-square tests for the categorical variables were performed for analyzing the observations. FWPS was effective in promoting the physical performance in dynamic balance measurement and muscle health, indicated through the increment in grip strength (left), upper arm circumference, and flat leg circumference from the baseline. However, similar improvements were not observed in the WPCS group. These results imply that whey protein fermented by L. casei DK211 is an effective protein supplement for enhancing muscle health in males performing regular resistance exercises.

고품질 혼화재와 급결제를 적용한 고강도 숏크리트의 현장실험 연구 (A Study on Field Test of High-Strength Shotcrete using High-quality Additions and Accelerators)

  • 마상준;김동민
    • 대한토목학회논문집
    • /
    • 제26권2C호
    • /
    • pp.121-131
    • /
    • 2006
  • 국내 숏크리트 강도기준은 고강도 숏크리트의 개발과 적용이 활발한 유럽과 비교해 볼 때 상대적으로 낮게 설정되어 있어서 고강도 숏크리트의 품질을 평가하기에는 어려움이 있다. 본 연구에서는 국내 숏크리트의 강도증진과 장기 내구성을 향상시킬 수 있는 방법을 모색하기 위해 현장실험을 실시하였다. 현장실험은 고품질 혼화재와 고성능 급결제를 적용한 고강도 숏크리트를 지향하였고, 숏크리트의 강도증진에 미치는 혼화재와 급결제의 영향을 파악하고자 하였다. 그리고 유럽통합규격(EFNARC)에 의거하여 품질평가를 수행하였는데, 실험결과 알칼리프리계 급결제를 사용한 경우의 초기강도 증진율이 90~97%로 가장 높게 나타나 초기강도 증진효과에 알칼리프리계 급결제가 효과적이었다. 또한, 실리카 흄을 혼입한 숏크리트는 압축강도가 45.2~55.8MPa, 휨강도가 5.01~6.66MPa로 혼입하지 않은 경우에 비해 각각 37~79%, 17~61%의 강도증진 효과가 나타났고, 실리카 흄 치환율은 7.5~10%일 때 강도증진 효과가 가장 우수한 것으로 나타났다. 현장실험 결과 국내 숏크리트의 고강도화를 위해서는 알카리프리계 급결제와 실리카 흄과 같은 고품질 혼화재의 사용이 필요할 것으로 판단된다.

양생시간에 따른 CLSM의 압축강도 및 압축파 속도 상관성 연구 (Study on Correlation between Compressive Strength and Compressional Wave Velocity for CLSM According to Curing Time)

  • 한우진;이종섭;조삼덕;김진환;변용훈
    • 한국지반환경공학회 논문집
    • /
    • 제16권11호
    • /
    • pp.5-11
    • /
    • 2015
  • 다짐이 어려운 지중매설물의 밀실한 충전을 위해 저강도 및 고유동성의 특성을 갖는 유동성 채움재(Controlled Low Strength Materials, CLSM)의 개발 및 현장적용에 대한 연구가 있어 왔다. 본 연구에서는 압축파 속도 및 일축압축강도를 측정하여 양생시간에 따른 CLSM의 강성 및 강도 특성을 비교하고자 하였다. CLSM의 재료는 모래와 실트, 플라이애쉬, CSA계 시멘트, 및 물을 혼합하여 충분한 유동성 및 낮은 강도를 나타내도록 구성하였으며, 플로우, 단위중량, 일축압축강도와 같은 CLSM의 물리적 특성을 분석하였다. 또한 경화되기 전부터 CLSM의 강성특성을 모니터링하기 위하여 압축파 측정용 셀을 제작한 후, 셀에 트랜스듀서를 접하여 압축파를 측정하였다. 실험결과, 일축압축강도는 양생초기에 크게 증가하였고, 기간이 길어질수록 증가량이 줄어드는 것으로 나타났다. 또한 압축파 속도는 양생기간이 길어짐에 따라 증가하였으며, 일축압축강도와 압축파 속도 사이에는 지수함수 관계를 보여주었다. 본 논문에서 제안된 압축파 측정을 통하여 CLSM의 강성변화를 파악할 수 있으며, 경화가 미완료된 양생초기의 일축압축강도 평가에도 효과적으로 활용될 수 있을 것으로 예상된다.