• 제목/요약/키워드: strength design method

검색결과 2,593건 처리시간 0.032초

절단피개량과 절단변연형태 및 하중각도가 도재라미네이트 베니어 내의 응력분포에 미치는 영향에 관한 삼차원 유한요소법적 연구 (THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF STRESS DISTRIBUTION IN PORCELAIN LAMINATE VENEERS WITH VARIOUS AMOUNTS OF INCISAL COVERAGE AND TYPES OF INCISAL FINISH LINE UNDER TWO LOADING CONDITIONS)

  • 류경희;이선형;양재호;정헌영
    • 대한치과보철학회지
    • /
    • 제37권2호
    • /
    • pp.143-166
    • /
    • 1999
  • The success of porcelain laminate veneer depends on the bond strength between tooth structure and ceramic restoration and the design of tooth preparation. In particular, incisal coverage and incisal finish line are the two most important factors in long-term fracture resistance. Although the majority of clinicians are practicing incisal coverage and there are various opinions on the geo-metrical ratio between the clinical crown length of the remaining tooth structure and the length of incisal extension in porcelain laminate veneer and the optimal incisal finish lines. scientific evidence still loaves much to be desired. The purpose of this study was to determine the effects of the amounts of incisal coverage and the types of incisal finish line on the stress distribution in maxillary anterior porcelain laminate veneers under two different loading conditions. Three-dimensional finite element models of a maxillary anterior porcelain veneer with differ-ent amounts of incisal coverage ; 0, 1, 2, and 3mm and different incisal finish lines feathered edge, incisal bevel, reverse bevel and lingual chamfer with various amounts of lingual extension were developed. 300N force was applied at the point 0.5mm cervical of the linguoincisal edge in two loading conditions ; A) 125 degrees, B) 132 degrees. Tensile and compressive stress in ceramic and shear stress in the resin cement layer were analyzed using three-dimensional finite element method. The results were as follows : 1. The types of incisal finish line had more influence on the stress distribution in porcelain laminate veneer than the amounts of incisal coverage. 2. In case of no incisal coverage, incisal beveled laminate exhibited more evenly distributed tensile stress than feathered edged laminate. And in case of incisal coverage, reverse beveled laminate and lingual chamfered laminate with 1mm lingual extension exhibited more evenly distributed tensile stress than lingual chamfered laminates with 2mm and 3mm lingual extension. 3. As long as the lingual chamfer goes, less tensile stress was found at the incisal edge, while much more tensile stress was found at the lingual margin area in proportion to the length of lingual extension. 4. Under 125 degree load, tensile stress in porcelain laminate veneer had increased compared with that under 132 degree load and the difference exhibited by the change of the amount of tooth support was larger. 5. The types of incisal finish line and the distance from the incisal finish line to the loading point had more influence on the shear stress distribution in the resin cement layer than the amounts of incisal coverage. In contrast loading condition had little influence.

  • PDF

사질토 지반에 설치된 우산형 마이크로파일의 지진 시 수평거동 특성 (Horizontal Behavior Characteristics of Umbrella-Type Micropile Applied in Sandy Soil Subjected to Seismic Motion)

  • 김수봉;손수원;김진만
    • 한국지반환경공학회 논문집
    • /
    • 제21권7호
    • /
    • pp.5-16
    • /
    • 2020
  • 현재 경주지진 및 포항지진 발생으로 내진설계기준이 강화되어 기존 시설물에 대한 내진성능평가를 실시하고 있다. 기존 시설물의 피해를 최소화하면서 국한된 협소한 장소에서 시공이 가능한 마이크로파일공법을 개선하여 지진 시 내진성능효과를 확보하고자 한다. 개선방법은 주 기둥인 연직말뚝 주변에 우산형태로 경사말뚝을 시공하여 말뚝 상부의 사각접시형 플레이트에서 말뚝을 모두 일체화하는 것이다. 본 논문에서는 수치해석으로 사질토지반에서 다양한 지진파에 대해 우산형 마이크로파일의 수평변위 거동을 분석하였다. 수치해석 결과, 지반이 연약할수록 우산형 마이크로파일의 수평저항력의 효과가 우수하였다. 경사말뚝의 근입심도에 따른 분석결과, 동일한 지반강도에서 근입심도가 15m 이상일 경우에 수평변위 저감 효과가 뚜렷했으며, N치 30 이상의 지반에 정착하면 지진 시에 효과가 있는 것으로 확인되었다. 마이크로파일의 근입심도와 수평변위 억제효과가 비례하였으며, 대체적으로 지반이 약할수록 변위억제 효과가 컸다. 우산형 마이크로파일은 수직말뚝이 모멘트에 대한 저항을 하고, 경사말뚝이 축력에 대한 저항을 하는 복합저항효과가 있었다.

지반보강용 수용성파우치(PVP)의 활용을 위한 기초적 연구 (A Fundamental Study on the Application of Water Souuble Pouch for Ground Reinforcement)

  • 정동호;김기호;김주헌;한중근
    • 한국지반신소재학회논문집
    • /
    • 제16권2호
    • /
    • pp.121-129
    • /
    • 2017
  • 도시의 노후화에 따른 상하수도관의 파손사례가 점차 증가하면서 지반함몰의 발생도 크게 증가하고 있고 도시과밀화에 따른 건설과 굴착공사들이 빈번해지고 있다. 특히, 도심에서는 lifeline이 지하화 되면서 지중에서 굴착과 되메움에 따라 원지반의 안정상태가 불안정한 상태를 갖게 된다. 이를 해결하기 위한 방법으로 양호한 토사다짐이나 그라우팅에 의한 지반보강법이 적용되고 있지만 지하매설물의 파손에 따른 시기를 예측키 어렵고, 지반내 구조물의 탐사방법도 한계가 있어 지반함몰과 같은 위험요소를 해결하기는 어려움이 있다. 따라서, 본 연구에서는 사전에 위험요소를 제거하기 위한 방법의 일환으로 개발된 빈배합상태의 혼화재를 포함한 수용성폴리머파우치에 대해 지반보강 적용성을 평가하였다. 대기속에 보관가능한 파우치의 특성과 지하수위내부에서의 수용성 및 일정시간내 융해됨에 따른 보강강도의 발현을 확인할 수 있었다. 이를 통해 상하수도관 매설시 뒤채움재에 혼합매설하는 경우, 지반내 물의상태에 따라 지반의 연약화를 방지가능할 수 있게 되었다.

기중 급속 동결 융해 시험 방법에 따른 철근콘크리트 보의 성능 실험 연구 (An Experimental Study on the Performance of RC Beam according to the Rapid Freezing and Thawing Test Method in the Air)

  • 김상우;이동주;김경민;김진섭
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권4호
    • /
    • pp.46-55
    • /
    • 2021
  • 콘크리트 구조물은 외부 극한기후환경에 노출 될 경우 공용년수가 증가할수록 다양한 문제점들이 발생할 수 있다. 이러한 문제들 중 최근 가장 문제가 되고 있는 폭우, 폭설과 같은 극한 기후요소의 작용으로 동결융해 현상이 발생한다. 본 연구에서는 서울의 경우, 동결융해가 발생하는 기간 동안에 매우 건조한 날씨를 나타내기 때문에 KS F 2456 를 참고하여 콘크리트의 기중 급속 동결 융해 시험법을 제시하였다. 콘크리트 공시체 및 철근콘크리트 휨 부재를 제작하여 0, 100, 200, 300 사이클의 기중 급속 동결 융해를 수행하였으며 성능 평가를 통해 각 실험체의 재료 및 부재 단위에서의 성능 저하를 확인하였다. 300사이클까지 기중 급속 동결 융해를 수행한 설계 강도 24 MPa의 콘크리트 압축 강도는 5.24 MPa(21%) 만큼 감소하며, 기중 급속 동결 융해가 진행될수록 콘크리트의 재료적 강도 감소에 의해 철근콘크리트 휨 부재의 철근의 응력 부담이 증가되어 지진과 같은 외력 발생에 따른 구조물의 에너지 흡수(소산) 능력이 감소한다.

국내 시범 생산 CFRP rod를 적용한 보 부재의 휨-전단 특성 (Characteristics of Flexuarl-Shear Behavior of Beam Using Demonstrated CFRP Rod)

  • 최소영;김일순;최명성;양은익
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권5호
    • /
    • pp.86-94
    • /
    • 2022
  • 전 세계적으로 철근의 부식으로 인해 발생하는 철근 콘크리트 구조물의 성능 저하를 해결하기 위하여, FRP를 철근으로 대체하는 것은 상당한 주목을 받고 있으며, FRP 물성을 향상시켜 구조물의 사용 수명을 연장하기 위한 기술 개발이 진행되어 왔다. 이에 따라, 고강도 및 고강성을 갖는 국산형 CFRP rod와 CFRP grid의 개발 및 제조 기술이 필요하며, 이를 적용한 구조 부재의 거동을 평가한 연구가 수행되어야 한다. 본 연구에서는 국내 시범 생산 CFRP rod를 보강근으로 사용한 보 부재의 휨 전단 거동을 보강비와 전단 경간비에 따라 검토하였다. 그 결과, 일정 범위를 벗어난 보강비를 사용할 경우, CFRP rod에 의한 성능 개선 효과가 상쇄되거나 효과가 크지 않는 것으로 나타났다. 한편, CFRP rod를 사용한 보 부재의 경우, 국내 구조 설계 기준에 근거하여 전단 철근을 배치하더라도 전단 파괴 가능성이 발생하였다. 그러므로 CFRP rod를 사용한 보 부재의 경우, 보강비 제한과 전단파괴를 방지하기 위한 검토가 필요한 것으로 판단된다. 또한, CFRP rod를 사용한 보 부재의 연성은 변형 에너지 평가방법에 따라 결정되므로, 보 부재의 구조 거동을 반영한 변형 에너지 평가법을 적용하여 연성을 평가해야 한다.

강합성 교량의 콘크리트 바닥판 해체 및 재시공이 용이한 분리식 볼트접합 전단연결재에 관한 실험적 연구 (An Experimental Study of Demountable Bolted Shear Connectors for the Easy Dismantling and Reconstruction of Concrete Slabs of Steel-Concrete Composite Bridges)

  • 정대성;박세현;김태형;김철영
    • 대한토목학회논문집
    • /
    • 제42권6호
    • /
    • pp.751-762
    • /
    • 2022
  • 강합성 교량에서 강 거더와 콘크리트 바닥판의 합성을 위한 전단연결재로는 용접접합 머리붙이 스터드가 주로 사용된다. 용접접합 전단연결재의 경우, 손상 또는 노후화된 바닥판 철거 시에 파쇄에 따른 소음, 비산먼지 등이 발생하여 환경적 문제가 지적되고 있다. 따라서 환경적 문제 및 생애주기비용 관점의 효율적인 유지관리를 위해서는 노후화된 콘크리트 바닥판의 교체가 용이한 분리식 전단연결재 개발이 필요하다. 기존의 볼트접합 전단연결재로는 매립너트 방식이 주로 연구되었으나 낮은 강성과 전단저항강도, 초기슬립 증가 등으로 교량과 같은 토목구조물에는 활용되지 못하고 있는 실정이다. 본 논문에서는 이러한 문제점들을 개선하기 위해 매립너트 부분이 스터드 기둥에 일체화되고 확대 기둥 하단에 테이퍼진 형상을 갖는 분리식 볼트접합 전단연결재를 제안하였다. 제안된 분리식 스터드볼트의 정적 전단강도와 슬립 변위에 대한 성능 검증을 위해 수평전단실험을 수행하였고, 기존 용접접합 스터드와 성능을 비교하였다. 제안된 분리식 볼트접합 전단연결재가 전단성능이 매우 우수하고, 슬립변위 또한 연성설계기준을 만족함으로써 기존 용접 스터드를 충분히 대체하여 적용 가능함을 확인하였다.

공작기계의 4차 산업혁명에서 특수한 형상 포켓 곡면가공을 위한 초정밀 소형 앵글 스핀들 개발에 관한 연구 (A Study on the Development of Ultra-precision Small Angle Spindle for Curved Processing of Special Shape Pocket in the Fourth Industrial Revolution of Machine Tools)

  • 이지웅
    • 실천공학교육논문지
    • /
    • 제15권1호
    • /
    • pp.119-126
    • /
    • 2023
  • 오늘날 자동차의 연비 향상 과 동적 거동 향상을 위해서 자동차 부품의 경량화 및 간소화 시대가 형성되고 있다. 설계와 제작의 간소화를 위해 제품 형상을 다양한 부품의 일체화로 진행되고 있다. 예를 들어 3개의 제품을 1개의 제품화 시키기 위해서 아주 협소한 부분까지 제품 가공하는 일이 발생되고 있다. 기존의 부품의 경우 가공의 편의성을 위해 정밀 다이캐스팅 또는 주물 생산으로 가공 후 조립하는데 다중 조립체(multi-piece) 방식은 공정수가 많이 필요로 하며, 부품의 정밀도와 강도를 저하시키는 요인이 된다. 가공 공정을 단순화 시키고 부품의 강도를 확보하기 위해서 일체형으로 제작하는 것이 단점을 극복하는데 매우 유리하지만 깊고 좁은 포켓 부분을 가공 할 경우 장비 자체 스핀들로는 가공이 불가능하다. 문제점을 해결하고자 절삭가공에 대한 연구가 활발하게 진행되고 있으며, 다축 복합가공 기술은 이러한 문제점을 해결할 뿐만 아니라, 지금까지 하나의 공작기계로 여러 공정에 따른 유연한 절삭가공이 어려웠던 복합 형상에도 절삭가공이 가능하다는 등 많은 장점을 가지고 있다. 하지만 고가의 장비로 인하여 제조경비 상승과 기계를 운영할 수 있는 기술자가 부족한 것이 현실이다. 5축 절삭 가공기에서는 깊고 협소한 구간의 제품을 생산할 때 공구의 간접으로 제품 생산에 사이클 타임이 늘어남은 물론 가공상에 문제점들이 많이 발생된다. 따라서 전용 공작기계 및 다축 복합가공기를 사용해야 한다. 그 대안으로 3축 머시닝센터에서 5축 이상의 다축 복합가공을 할 수 있는 특수 공구로서의 앵글 스핀들(angle spinde)이 사용될 수 있다. 앵글 스핀들 사용함으로 가공 진동 흡수, 낮은 열 발생과 작동 안정성, 우수한 치수 안정성, 강도 확보와 같은 분야에서 다양하고 지속적인 연구가 필요하다.

의료기기산업의 수출경쟁력 분석 및 강화방안 -강원지역 의료기기산업을 중심으로- (The Analysis and Strengthening Method of Export Competitive Power of Medical Device Industry - With Respect to Medical Device Industry in Gangwon Area)

  • 이강빈
    • 무역상무연구
    • /
    • 제45권
    • /
    • pp.191-238
    • /
    • 2010
  • The purpose of this paper is to make research on the trend of the worldwide medical device market, the trend of the medical device market in the major foreign countries, the present status of the medical device industry in Korea and Gangwon area, the present status of export competitive power and the SWOT analysis of competitive power of the medical device industry in Gangwon area, and the strengthening methods of export competitive power of the medical device industry in Gangwon area. As the research method, the questionaire for the strengthening of export competitive power of the medical device industry in Gangwon area was carried out from August 13 to Otober 22, 2009. The worldwide medical device market in 2008 is estimated at USD 210.2 billion, with the United States being the largest market, followed closely by Japan and Western Europe. In 2006, the worldwide export amount of medical devices recorded USD 121.1 billion and the worldwide import amount of medical devices recorded USD 126.3 billion. As of the end of 2008, the number of Korea's medical device manufacturers expanded to 1,726. The production amount of Korea's medical device industry in 2008 recorded 2,525 billion won, and the domestic market volume of medical devices in 2008 recorded 3,618 billion won. Korea's export amount of medical devices in 2008 recorded USD 1,132 million and recorded a 9.67% growth compared to the previous year, and the import amount of medical devices recorded USD 2,123 million and recorded a 1.43% reduction compared to the previous year. As of the end of 2008, the number of Gangwon area's medical device manufacturers expanded to 81. The production amount of Gangwon area's medical industry in 2008 recorded 380 billion won, and Gangwon area's export amount of medical devices recorded USD 269 million and recorded a 0.25% reduction compared to the previous year, and the import amount of medical devices recorded USD 3 million and recorded a 39.63% reduction compared to the previous year. According to the result analysis of the questionaire for the strengthening of export competitive power of medical device industry in Gangwon area(August 13~October 22, 2009), the competing country of the export medical device is the United States being the highest ranking. Comparing to the collective competitive power level 100 of the competing country, the collective competitive level of the export medical device is 60 below and 70-80 below being the highest ranking. Comparing to the quality level 100 of the United States, EU and Japan, the quality level of the export medical device is 80-90 below being the highest ranking. Comparing to the design level 100 of the United States, EU and Japan, the design level of the export medical device is 90-100 below being the highest ranking. Comparing to the technology level 100 of the United States, EU and Japan, the technology level of the export medical device is 80-90 below being the highest ranking. According to the SWOT analysis of competitive power of medical device industry in Gangwon area, the strength is the abundant expert manpower of the medical device in Wonju area. The weakness is the fragility of the brand recognition of the medical device industry. The opportunity is the demand increase of the new medical device owing to the advanced age of population. The threat is the difficulty of entry into overseas market owing to the request of the new specification certification of the medical device. In order to strengthen the export competitive power of the medical device industry in Gangwon area, the following measures should be taken by the government, local self-government body, related organization and medical device industry : the development of new technology and design, the enhancement of brand recognition. the acquisition of the foreign specification certification, the building of overseas distribution channel and after sales service channel, the positive participation in overseas medical device exhibition and opening of medical device exhibition, the training of expert manpower, the strengthening of overseas marketing, and the application of FTA and the establishment of counter measures against FTA. In conclusion, the medical device industry in Gangwon area has the difficulty in the entry into the overseas market owing to the shortage of overseas marketing capability. Therefore, the government and local self-government body should make the intensive and systematical support for overseas marketing of the medical device industry. For the support of overseas marketing, the government and local self-government body should provide positively the support of expenses for the acquisition of foreign specification certification, the support of participation in the overseas medical device exhibition, the despatch of market development mission, the increase of the support amount for R&D investment fund, and the training of expert manpower of medical devices.

  • PDF

아파트 리모델링을 위한 부분해체에서 슬래브의 구조적 거동 (Structural Behavior of Slab in the Partial Demolition for the Apartment Remodeling)

  • 최훈;주형중;김효진;윤순종
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권2호
    • /
    • pp.19-30
    • /
    • 2012
  • 사회적 생활 환경이 향상되고 도시개발이 안정화됨에 따라 신규 주택건설공사에 대한 요구는 점진적으로 감소하고 있다. 이에, 신축 보다는 정비를 통해 구조물의 사용수명을 연장시키는 리모델링의 중요성이 강조되고 있으며, 이와 관련된 많은 연구들이 진행중에 있다. 그러나 국내의 경우 리모델링 해체공사를 위한 구조해석 관련 기준이 미흡한 실정이다. 국내 보고된 리모델링 해체 공사도중에 발생한 사고중 슬래브 붕괴사고는 다수를 차지하고 있으며, 대형사고로 발전할 수 있는 위험성을 내포하고 있어 리모델링 해체공사에 적용할 수 있는 구조해석 관련 기준의 개발은 중요하면서도 시급하다. 슬래브의 경우 하중을 직접적으로 저항하기 때문에 균열에 취약해 질수 있고 균열이 발생할 경우 리모델링의 근본취지에 어긋남과 동시에 붕괴사고의 원인이 될 수 있으므로, 초기균열을 억제함은 상당히 중요하다고 볼 수 있다. 따라서 이 연구는 슬래브 구조물의 초기균열을 억제하기 위한 기준을 마련하기 위한 기초자료를 제공하기 위해 수행되었다. 슬래브 구조물의 구조적 거동과 관련된 주요 요소로는 구조물의 형상과 구조물에 작용하는 하중이 있다. 슬래브 구조물의 형상과 작용하중과의 상호관계를 파악하기 위해 국내 아파트 평면도를 분석하였으며, 해체잔해물의 단위중량, 콘크리트 강도 등과 관련된 자료를 분석하였다. 분석결과를 활용하여 유한요소해석을 실시하였으며, 유한요소해석결과 주요 하중요소인 해체잔해물의 적재제한높이 및 적재방법에 대해 검토할 수 있었다. 또한, 소형해체장비의 이동에 따른 슬래브의 구조적 거동을 파악하기 위해 동적, 정적 재하실험을 실시하였으며, 실험결과 이동하중에 따른 충격의 영향을 반영할 수 있는 충격계수를 결정할 수 있었다.

블록 이동용 러그의 안전사용하중 결정에 관한 구조 평가법 (Structural Evaluation Method to Determination Safe Working Load of Block Handling Lugs)

  • 권오현;박주신;서정관
    • 해양환경안전학회지
    • /
    • 제29권4호
    • /
    • pp.363-371
    • /
    • 2023
  • 한 척의 선박을 건조하기 위해서는 다양한 크기의 블록(block)들을 이동 및 탑재해야 한다. 이러한 과정에서 블록의 체결 방법 및 각 조선소 설비 특성에 맞는 다양한 기능에 부합하는 러그를 사용하고 있다. 블록 구조의 중량 및 형태에 따라서 러그의 크기와 형상이 다양하며, 샤클(shackle)이 체결되는 홀 주변에 부족한 강성을 보완하기 위하여 덧판(doubling pad)을 용접하여 구조를 보강한다. 리프팅(lifting) 조건별 러그의 설계를 하는 방법은 보 이론(beam theory)에 의한 수계산 방법과 유한요소해석 모델링을 이용한 구조해석을 수행하고 있다. 해석적 방법의 경우, 요소의 종류와 모델링 방법에 따라서 결과 차이가 발생하여 표준화된 평가법의 정립이 필요한 상황이다. 이러한 모호한 방법론 적용 시 블록의 이동 및 반전(turn-over) 과정 중에서 심각한 안전 문제를 유발할 가능성이 있다. 본 연구에서는 러그의 실제 탑재공정에 따른 구조 응답을 평가할 수 있는 모델링 조건, 평가법을 확정하고자 다양한 변수의 영향을 수치 구조해석을 통하여 비교 및 분석하였다. 러그 홀(hole) 주변 덧판부와 용접 비드(bead)를 표현한 모델링 기법이 가장 실제적인 거동 결과를 주고 있다. 실제 러그와 동일한 조건(용접부 비드만 주재료와 연결)의 모델링에 등가하중을 적용한 결과는 MPC 하중 적용 결과보다 낮은 최종강도를 나타낸다. 더불어 해석 시간 단축을 위해서 2차원 쉘(shell) 요소를 적용한 경우, 덧판 두께를 85% 수준으로 감소시켜서 안전사용하중을 예측할 수 있음을 확인하였다. 논문에서 검토한 다양한 변수의 영향들 결과는 러그 설계 및 안전사용하중 예측에 근거 자료로 활용될 것으로 기대된다.