• 대한약침학회지
• /
• 제14권1호
• /
• pp.35-49
• /
• 2011

Objectives: The aim of this experiment is to know about Effect of pulse-wave factors in Middle Aged Women by Mountain Cultivated Ginseng Pharmacopuncture. Methods: First 20 Middle Aged women are diagnosed by pulse diagnosis, and then Mountain Cultivated Ginseng Pharmacopuncture(1 injection 20cc) were injected. 30 minutes later, pulse diagnosis again performed. As a result, method of one-group pretest-posttes design were used for evaluation. Results: T(Total pulse cycle) time statistically significant increased on both left and right chon, kwan, cheok. T4 time statistically significant increased on both left and right chon, kwan, cheok. T4-T1/T indexs except left cheokmaek, Right cheokmaek observation area decreased significantly in four sites. Wm(indicating high pressure retention time) indexs increased significantly in the five sites were observed except right chon maek. Conclusions: Effect of pulse-wave factors in Middle Aged Women by Mountain Cultivated Ginseng Pharmacopuncture increased T, T4, Wm and decreased T4-T1/T indexs. The results of this experiment, Mountain Cultivated Ginseng Pharmacopuncture induced to increase the Pulse-wave's stability and strength.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.79-82
• /
• 2008

모멘트 하중을 받는 I형 보의 탄성좌굴강도는 하중의 종류, 하중의 단면 내 작용위치, 그리고 구속조건 등과 같은 인자들에 의해 영향을 받는다. 대부분의 시방기준에서는 균일한 모멘트 조건에 대한 좌굴강도를 사용하고 있으며 비균일한 모멘트 효과를 고려하기 위하여 모멘트 구배 수정계수를 적용하고 있다. 본 논문에서는 SSRC 지침서의 방법을 일축대칭 I형 보에 적용할 수 있도록 개선된 모멘트 구배 수정계수를 제안하였다. 단면 내 임의의 높이에 작용하는 연직방향 하중에 대한 일축대칭 I형 보의 유한요소 좌굴해석을 실시하였으며 연직방향 하중은 지간 중앙에 작용하는 집중하중과 등분포 하중을 고려하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.587-592
• /
• 2006

현재 우리나라의 해양 수산 해운분야의 종합정보통신망의 구측이 필요한 이유는 해양의 중요성과 관련종사자 및 어민에 대한 기초정보 제시와 함께 연구 인프라 구축과 관련하여 국민들에게 자료를 제공하며, 이를 위하여 해양 수산 및 해운의 각 분야에 분산된 연구정보와 기타 관련 정보들을 수집 분석한 뒤 DB화하여, 체계적인 정보 유통체제를 구축하고 해양정보 취합을 위한 원격자료 통합관리시스템을 운영함으로써 국내외 대학, 연구기관 및 기업체를 연계하고 활발한 정보의 공유화 교류를 통하여 우리나라의 해양, 수산의 발전뿐만 아니라 국가 경쟁력 강화에 이바지 할 수 있도록 연구하고자 한다.

• 한국강구조학회 논문집
• /
• 제19권4호
• /
• pp.357-366
• /
• 2007

본 연구는 비대칭 H형강을 사용한 슬림플로어 보의 화재시 구조성능에 관한 실험 및 해석적 연구로서, 화재시 본 합성부재의 구조거동을 파악하여 합리적 내화설계의 자료를 얻는 것이 목적이다. 화재실험으로 계획된 여러 변수의 시험체를 제작하고 상온과 고온에서 휨실험을 수행하여 시간에 따른 온도분포, 하중-처짐 관계를 분석하였다. 해석적 방법은 설계된 단면에 대하여 완전 합성을 가정으로, 열전도 해석으로 온도분포를 구하고 재료의 잔존강도를 분할된 메쉬에 입력하여 휨강도를 예측하였다. 웨브의 두께와 깊이를 변수로 하여 슬림플로어 보의 화재시 휨내력을 고찰하였다.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.34-39
• /
• 2014

In this study, the structural analysis and the modal analysis are conducted to investigate the stress level, the deformation characteristics and the natural modes of the casing of a planetary gear reducer for a 800kW grade pulverizer mill. The casing is subjected to the load, 2800 kN, from the lump coals in the pulverizing process. Because of the symmetry, the half portion of the reducer casing is modeled for the stress analysis. But the full model is used to find out the eigenvalues and natural modes for the modal analysis. The contact conditions are applied between the thrust pad bearing and the adjacent contacting parts. The results shows that the casing structure has the sufficient strength and stiffness to support the load under consideration. ANSYS version 15 is employed to perform the numerical study.

• Journal of Welding and Joining
• /
• 제10권3호
• /
• pp.54-62
• /
• 1992

Large steel water pipes are joined prevalently by bell and method and welded at inside and outside of lapped parts. According to the Korean Standard(KS) for fabrication of water pipes, the weldments are designed to have the length of leg which is same as or larger than the thickness of the pipe. It is recently pointed out that the standard size of weldments is too large, which results in an excessive consumption of material and labor. In this study, several cases of weldments having different sizes were investigated to reduce the length of leg to the effective size. For each case, the analysis of stresses was carried out to evaluate the safety of the welded pipes by using a package program, ANSYS, under the consideration of the loading condition of water pipes which includes the soil pressure on the pipe, the load over the road, and temperature change of the pipe. The results of this study revealed that the weldment which has the length of leg of the size over 0.7*thickness of the pipe could provide a stress level below the yield strength. Especially when the length of leg is 85% of the wall thickness, the maximum equivalent stress is only slightly higher than that of the leg of fillet of the size of 1.0*pipe thickness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.279-284
• /
• 2005

The casting defects that are caused by molten metal were cold shut formation, entrapment of air, gas, and inclusion. But the control of casting defects has been based on the experience of the foundry engineers. In this thesis, the computer simulation analyzed the flow of molten metal. The quantitative analyses which proposed the effective mold design was executed Flow patterns of 0.15-0.16m/s molten metal in 15 mm thin plate casting were investigated in order to optimize die-casting process. As increasing ingate velocity in thin plate casting, cold shot was decreased. The parameters of runner shape that affected on the optimized conditions that was calculated with simple equation were investigated. These die casting process control techniques of automobile valve body mid-plate have achieved good agreement with the experimental data of tensile strength, hardness test, and material structure photographies satisfactory results.

• 한국정밀공학회지
• /
• 제7권2호
• /
• pp.14-27
• /
• 1990

Electromagnetic Pulse Forming is the one of the high velocity forming method. When the electric energy which is charged in the capacitor bank is suddenly discharged into the electromagnetic coil, the high magnetic field occurs at the airgap between the electromagnetic coil and workpiece. Thus we can obtain the high electromagnetic pressure, which is proportional to the square of magnetic flux density. This is the basic principle of the electromagnetic pulse forming. In this paper, the equivalent L-R-C circuit is derived by computing the magnetic field and its loss of the total system. Thus, the values of the magnetic flux density and pressure can be obtained from the equation of this circuit. As a result, the computed and measured values of the maximum magnetic flux density and pressure are compared and the characteristics of the tapered field shaper are further discussed as follows; 1) The strength of magnetic flux density and pressure can be controlled by the charged energy and the size of the airgap between the inner field shaper and the workpiece. 2) During the design of the tapered field shaper, the penetration of the magnetic flux through the sharp edge should be considered.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.153-159
• /
• 2007

이 논문은 FRP시스템 외부부착공법의 조기 탈착문제를 개선하기 위해 개발된 유리섬유-강 복합판(GFSP)으로 보강된 RC보의 성능 및 파괴특성에 관한 실험적 연구다. 사용 중인 보의 손상과 재하상황을 실제적으로 모의하기 위하여, 사전균열과 반복하중이 실험변수로 채택되었다. 실험에서 GFSP 보강은 보의 강도증가, 처짐감소, 균열의 억제 등에 매우 효과적인 보강공법임이 확인되었다. 그러나 GFSP로 보강되는 보의 설계는 휨 성능에서 유리섬유의 취성거동을 고려하여야 하는 것을 보여주었다.

• 국제물리치료학회지
• /
• 제10권4호
• /
• pp.1926-1933
• /
• 2019

Background: Physical therapy has been widely studied in various fields, however, the academic trends and characteristics has not been systematically analyzed. Semantic network analysis is used as an approach for this study. Objective: To explore academic trends and knowledge system in the physiotherapy research in the Journal of International Academy Physical Therapy (J of IAPTR) Study design : Literature review Method: Semantic network analysis was conducted using the titles of 272 articles published in the Journal of IAPTR from 2010 to 2019. Results: Frequency analysis revealed following most frequently used key words; Stroke (27 times), Balance (21 times), Elder (13 times), Forward head posture (FHP, 11 times), Muscle activity (9 times). The relationship between the presented keywords is divided into six subgroups (FHP and pain, walk and quality, elder and balance, stroke and apoptosis, muscle strength and function) according to their correlation and frequency to be used together. Conclusion: The study is considered to be of help to researchers who want to identify research trends in physiotherapy.