• Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.161-182
• /
• 2019

Quantifying the amount of carbon pools in forest ecosystems enables to understand about various carbon pools in the forest ecosystem. Therefore, this study was conducted in the Chilimo dry afromontane forest to estimate the amount of carbon stored. The natural forest was stratified into three forest patches based on species composition, diversity, and structure. A total of 50 permanent sample plots of 20 m × 20 m (400 ㎡ ) each were established, laid out on transects of altitudinal gradients with a distance of 100 m between plots. The plots were measured twice in 2012 and 2017. Tree, deadwood, mineral soil, forest floor, and stump data were collected in the main plots, while shrubs, saplings, herbaceous plants, and seedling data were sampled inside subplots. Soil organic carbon (SOC %) was analyzed following Walkely, while Black's procedure and bulk density were estimated following the procedure of Blake (Methods of soil analysis, 1965). Aboveground biomass was calculated using the equation of Chave et al. (Glob Chang Biol_20:3177-3190, 2014). Data analysis was made using RStudio software. To analyze equality of means, we used ANOVA for multiple comparisons among elevation classes at α = 0.05. The aboveground carbon of the natural forest ranged from 148.30 ± 115.02 for high altitude to 100.14 ± 39.93 for middle altitude, was highest at 151.35 ± 108.98 t C ha^-1 for gentle slope, and was lowest at 88.01 ± 49.72 t C ha^-1 for middle slope. The mean stump carbon density 2.33 ± 1.64 t C ha^-1 was the highest for the middle slope, and 1.68 ± 1.21 t C ha^-1 was the lowest for the steep slope range. The highest 1.44 ± 2.21 t C ha^-1 deadwood carbon density was found under the middle slope range, and the lowest 0.21 ± 0.20 t C ha^-1 was found under the lowest slope range. The SOCD up to 1 m depth was highest at 295.96 ± 80.45 t C ha^-1 under the middle altitudinal gradient; however, it was lowest at 206.40 ± 65.59 t C ha^-1 under the lower altitudinal gradient. The mean ecosystem carbon stock density of the sampled plots in natural forests ranged from 221.89 to 819.44 t C ha^-1. There was a temporal variation in carbon pools along environmental and social factors. The highest carbon pool was contributed by SOC. We recommend forest carbon-related awareness creation for local people, and promotion of the local knowledge can be regarded as a possible option for sustainable forest management.

• Korean Journal of Environment and Ecology
• /
• v.15 no.3
• /
• pp.213-223
• /
• 2001

This study was carried out to clarify the distribution pattern of Salicaceae species which are considered as obligatory riparian vegetation, and also the correspondence between their distribution and the environment factors. Eighty-three study sites by stratified sampling were selected from the upstream to the downstream of An-sung stream. Vegetation factors such as coverage by species, disturbance, etc., and environmental factors including microtopography, soil properties, etc., measured and analyzed. Salicaceae species were identified as total 2 genera, 11 species through all study area, and the average occurring species were 2.8 species.5. koreensis among other species showed highest occurring frequency at An-sung streams, and also it was distributed widely through study area. S. gracizistyla was mainly fecund at upstream sites, where sandy soil texture and high longitudinal slope were developed. S. purpurea vats. japonica was mostly observed in the sandy soil, the same as S. gracilistytu and however, was not dominant but rather mixed with S. gracitistyta and S. koreensis. On the other hand, distribution of S. glandulosa were closely related with littoral zone of the lake and the lower sea level with sandy loam and loamy sand Boils of high organic matter content. Under CCA, canonical correspondence analysis, distribution of Saticaceae species was positively correlated with environmental gradients such as soil properties along to topography.

• Journal of Wetlands Research
• /
• v.12 no.3
• /
• pp.129-144
• /
• 2010

We have studied the changes of the environmental and vegetational factors according to the hydro-seral stages in the shoreline of the lagoons, Korea. We have divided seral stages into 7 stages from open water stage to the stratified forest stage considering as the characteristics of water body, dominance of submerged and emergent plant, and development of the shrub, subtree and tree layer. According to the successional stage, water depth gradually decreased and water quality changed from seawater to brackish water and from brackish water to fresh water, organic matter in a soil layer gradually increased, and the litter layer grew up. As the development of the vegetation structure, the life-form of the vascular plants changed as follows; open water ${\rightarrow}$ submerged plant and floating-leaved plant ${\rightarrow}$ emergent plant and submerged plant ${\rightarrow}$ emergent plant ${\rightarrow}$ emergent plant, mesophyte and scrub ${\rightarrow}$ mesophyte. In the late seral stage, the 3 different forest types were established by the water retention or drainage and nutrient accumulation of the soil layer. Salix dominant forest developed in the wetted sites, the forest type dominated by Pinus thunbergii, Carex pumila and mesophytes developed in the well drained sites causing by sand substrate, and the forest type dominated by the planted or ruderals such as Pinus densiflora, Robinia psedo-acacia, Festuca ovina, Setaria viridis ect. developed in the sites composed of forest soil introduced by artificial reclamation.

• Structural Engineering and Mechanics
• /
• v.57 no.2
• /
• pp.327-355
• /
• 2016

A new analytical derivation of the elastodynamic point load solutions for an isotropic multi-layered half-space is presented by means of the precise integration method (PIM) and the approach of dual vector. The time-harmonic external load is prescribed either on the external boundary or in the interior of the solid medium. Starting with the axisymmetric governing motion equations in a cylindrical coordinate system, a second order ordinary differential matrix equation can be gained by making use of the Hankel integral transform. Employing the technique of dual vector, the second order ordinary differential matrix equation can be simplified into a first-order one. The approach of PIM is implemented to obtain the solutions of the ordinary differential matrix equation in the Hankel integral transform domain. The PIM is a highly accurate algorithm to solve sets of first-order ordinary differential equations and any desired accuracy of the dynamic point load solutions can be achieved. The numerical simulation is based on algebraic matrix operation. As a result, the computational effort is reduced to a great extent and the computation is unconditionally stable. Selected numerical trials are given to validate the accuracy and applicability of the proposed approach. More examples are discussed to portray the dependence of the load-displacement response on the isotropic parameters of the multi-layered media, the depth of external load and the frequency of excitation.

• Journal of Plant Biology
• /
• v.15 no.3
• /
• pp.1-8
• /
• 1972

A comparison between the productivity of the evergreen needle pine(Pinus densiflora) and of the deciduous broad leaved oak(Quercus mongolica) stands, which is located near Choon-Chun city, Kangwon dist. have been established. The pine stand had a stand density of 938 trees per ha and oak stand had of 638 trees per ha. The diameter at breast height (D) and the height of tree (H) of each tree were measured in sample plot of 800$m^2$. Twelve standard sample trees chose from the sample area felled down, and then weighed the stem, branches and leaves separately, according to both the stratified clip technique and the stem analysis. The vertical distribution of photosynthetic system was arranged effectively for high productivity in the productive structure of both trees. The allometric relation between D2H and dry weight of stem (Ws), branches (Wb) and leaves (Wl) of pine were approximated by log Ws=0.6212 log D2H-0.5383 log Wb=0.4681 log D2H-0.7236 log Wl=0.2582 log D2H-5.1567 and those of oak were approximated by log Ws=0.5125 log D2H＋0.0231 log Wb=0.5125 log D2H-0.3755 log Wl=0.8721 log D2H-2.9710 From the above, the standing crops of pine and oak in the sample area were estimated to be as much as 38.83ton and 48.11 ton of dry matter, above ground, per ha, respectively. Annual net production as the sum of the biomass newly formed during one year was appraised at 12.66ton/ha.yr in pine stand and at 8.74 ton/ha.yr in oak. The reason of high productivity of pine stand compared with oak might be resulted from much more about 4 times of the amount of the photosynthetic system, but less non-photosynthetic one of pine than those of oak. To increase the productivity of the forest stands investigated it was necessary to make densly a stand density, to be abundant in the inorganic nutrients and to preserve much water in soil to conserve the litters.

• Journal of Forest and Environmental Science
• /
• v.37 no.3
• /
• pp.243-250
• /
• 2021

Information on butterflies in the Niger Delta Region is relatively scanty because monitoring of their activities and distribution has not been fully documented and these are paramount to establish their conservation protocols. The study therefore aimed at evaluating the species richness distribution pattern, and relative abundance of butterflies in the University of Port Harcourt. The University Park was purposively selected for this study. The park was stratified into three different habitat types (secondary forest, farmland, and residential/garden). A sampling of each stratum was done three times; twice in the morning between 8:00 am and 12:00 pm as well as once in the evening between 4:00 pm and 6:00 pm along a 100 m line transects for 16 months (May 2017-August 2018). Data collected were analyzed for species diversity indices, evenness, and similarity index. A total of 1,932 individual butterflies belonging to 28 species, 18 genera, and five 5 families were identified in the study area. Species diversity and evenness were higher on farmland (1-D=0.909; H'=2.615; E=0.833), and least in the residential area/gardens (1-D=0.744; H'=1.975; E=0.659). The family Nymphalidae (39.0%) had the highest number of species occurrence while Hesperidae (0.4%) had the lowest composition. Anthene larydas (24.12%) had the highest relative abundance in the entire study area, followed by Acraea serena (17.49%). The study, therefore, recommends continuous monitoring of butterfly species diversity and composition also in other regions.

• Korean Journal of Agricultural Science
• /
• v.15 no.1
• /
• pp.47-68
• /
• 1988

This study was conducted to define the optimal conditions for embryo growth during seed stratification and for breaking dormancy as well as seed germination of stratified ginseng seeds. The experiments were also carried out to detect some materials which were expected to induce seed dormancy in the ginseng seeds. The results summarized as follows; 1. The growth of embryo during seed stratification was significantly inhibited by the existence of endocarp. The fastest embryo growth was resulted at $15^{\circ}C$ and an estimated optimal temperature for embryo growth was about $18^{\circ}C$. 2. There was no significant difference between the embryo growth and germination ratio of ginseng seeds which were sown in seed bed at Aug-5 without seed stratification and that of artificial seed stratification. 3. Embryo growth and germination ratio was significantly inhibited by high temperature treatment at $30^{\circ}C$ for 24 hours or respiration stress by immersing seeds in water for 10 days or more. 4. When the seed stratification was started at $10^{\circ}C$, growth of embryo in the ginseng seeds were almost stopped. But, when the seeds were stratified first at $20^{\circ}C$ for 50 days and next at $10^{\circ}C$ for 50 days, the embryo growth was significantly promoted compared with the embryo growth in the seeds which were stratified at $20^{\circ}C$ for 100 days. 5. The successive embryo growth after seed stratification was significantly accelerated at $10^{\circ}C$ but the seeds chilled at $5^{\circ}C$ for 100 days were resulted in the highest germination ratio as well as the shortest days for germination. 6. The successive embryo growth during chilling treatment and seed germination were significantly inhibited by immersing seeds in water just before chilling treatment or during chilling treatment and by interruption of chilling treatment with raising temperature to $20^{\circ}C$ for 20 days during chilling treatment. 7. The germination ratio of ginseng seeds which finished chilling treatment was highest at $10^{\circ}C$ and 62.5% was the estimated soil moisture for the best germination of ginseng seeds. The ginseng seeds were found to require high amount of oxygen for germination. 8. Only water soluble material in homogenized ginseng seeds showed a significant inhibiting effect on the seed germination of sesame, millet and soybean. Water soluble material dissolved from undehisced ginseng seeds showed stronger inhibiting effect on the seedling growth of sesame than material from dehisced ginseng seeds. Extraction temperature did not influence the inhibiting effect of the material dissolved from ginseng seeds on the seedling growth of sesame. 9. Water soluble materials dissolved from the berry pulps, leaves, fresh roots and dried roots also showed a significant inhibiting effect on the seedling growth of sesame. 10. Water soluble materials dissolved from the ginseng seeds, leaves and fresh roots showed a significant inhibiting effect on the germination of true fungi and the growth of spawn but the growth of phytopathogenic bacteria was not. 11. Among the water soluble materials dissolved from ginseng seeds, the materials of low molecular weight less than 3,000 were resulted a significant inhibiting effect on the seedling growth of sesame and the materials of high molecular weight also showed an inhibiting effect.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.526-535
• /
• 2021

Spatial sampling design plays an important role in GIS-based modeling studies because it increases modeling efficiency while reducing the cost of sampling. In the field of agricultural systems, research demand for high-resolution spatial databased modeling to predict and evaluate climate change impacts is growing rapidly. Accordingly, the need and importance of spatial sampling design are increasing. The purpose of this study was to design spatial sampling of paddy fields (11,386 grids with 1 km spatial resolution) in Korea for use in agricultural spatial modeling. A stratified random sampling design was developed and applied in 2030s, 2050s, and 2080s under two RCP scenarios of 4.5 and 8.5. Twenty-five weather and four soil characteristics were used as stratification variables. Stratification and sample allocation were optimized to ensure minimum sample size under given precision constraints for 16 target variables such as crop yield, greenhouse gas emission, and pest distribution. Precision and accuracy of the sampling were evaluated through sampling simulations based on coefficient of variation (CV) and relative bias, respectively. As a result, the paddy field could be optimized in the range of 5 to 21 strata and 46 to 69 samples. Evaluation results showed that target variables were within precision constraints (CV<0.05 except for crop yield) with low bias values (below 3%). These results can contribute to reducing sampling cost and computation time while having high predictive power. It is expected to be widely used as a representative sample grid in various agriculture spatial modeling studies.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.25-32
• /
• 2018

This paper investigates the effect of rock discontinuities on a shear stress wave that is induced by earthquake or blasting and provides the result of numerical parametric studies. The numerical tests of different conditions of rock and discontinuity have been carried out after confirming that the numerical approach is valid throughout a verification analysis from which the test results were compared with a theoretical solution. In-situ stress condition was considered as a rock condition and internal friction angle and cohesive value, which are the shear strength parameters, were considered as discontinuities condition. The joint inclination angle was also taken into account as a parameter. With the various conditions of different parameters, the test results showed that a shear stress wave propagating through a mass is highly influenced by the shear strength of discontinuities and the condition of joint inclination angle as well as in-situ stress. The study results indicate that when earthquake or blasting-induced dynamic loading propagates through a jointed rock mass or a stratified soil ground the effect of in-situ stress and discontinuities including a stratum boundary should be taken into account when evaluating the dynamic effect on nearby facilities and structures.