Abstract
A comparison between the productivity of the evergreen needle pine(Pinus densiflora) and of the deciduous broad leaved oak(Quercus mongolica) stands, which is located near Choon-Chun city, Kangwon dist. have been established. The pine stand had a stand density of 938 trees per ha and oak stand had of 638 trees per ha. The diameter at breast height (D) and the height of tree (H) of each tree were measured in sample plot of 800$m^2$. Twelve standard sample trees chose from the sample area felled down, and then weighed the stem, branches and leaves separately, according to both the stratified clip technique and the stem analysis. The vertical distribution of photosynthetic system was arranged effectively for high productivity in the productive structure of both trees. The allometric relation between D2H and dry weight of stem (Ws), branches (Wb) and leaves (Wl) of pine were approximated by log Ws=0.6212 log D2H-0.5383 log Wb=0.4681 log D2H-0.7236 log Wl=0.2582 log D2H-5.1567 and those of oak were approximated by log Ws=0.5125 log D2H＋0.0231 log Wb=0.5125 log D2H-0.3755 log Wl=0.8721 log D2H-2.9710 From the above, the standing crops of pine and oak in the sample area were estimated to be as much as 38.83ton and 48.11 ton of dry matter, above ground, per ha, respectively. Annual net production as the sum of the biomass newly formed during one year was appraised at 12.66ton/ha.yr in pine stand and at 8.74 ton/ha.yr in oak. The reason of high productivity of pine stand compared with oak might be resulted from much more about 4 times of the amount of the photosynthetic system, but less non-photosynthetic one of pine than those of oak. To increase the productivity of the forest stands investigated it was necessary to make densly a stand density, to be abundant in the inorganic nutrients and to preserve much water in soil to conserve the litters.