• 대한금속재료학회지
• /
• 제47권2호
• /
• pp.99-106
• /
• 2009

The high temperature corrosion properties of heat resistant steels were investigated in oxidation atmosphere including sulfur dioxide. The heat resistant steels of T22, T92, T122, T347HFG and T304H were evaluated at 620, $670^{\circ}C$ for 400 hours. The corrosion rates showed a decreasing tendency while chrome contents of those steels increased from 2 mass.% to 19 mass.%. The in crease in temperature increasement has an more effect on the corrosion rates of low chrome steels than high chrome steels. The weight gains of T22, T92, T304H at $670^{\circ}C$ were 3.7, 1.65, 1.23 times compared with those at $620^{\circ}C$. The external scale formed on T22 was composed of hematite, magnetite and Fe-Cr spinel and internal layer including iron oxide mixed with sulfide. The scales formed on T92, T122, T304H consisted of an outer layer of hematite and inner layer of chrome oxide and hematite. The proportion of chrome oxide at inner layer was increased when the chrome contents in heat resistant steels were increased.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.3-8
• /
• 2001

The mineral industry of the United States is going through a challenging time. The US as an industrial nation faces with increasing demand in raw materials to fuel various industrial sectors but, at the same time, meeting environmental constraints associated with excavating and extracting these raw materials. In addition, gradual depletion of material resources. and the necessity of handling more complex forms of resources of primary origin have led to a decline in her resource productivity, once a strategic advantage of the U.S. As a result. the United States currently relies heavily upon foreign importation of various materials such as precious and strategic metals. However, since the US is the major consumer of most of these materials, the recovery of these values from scrap would help renew her position as a resource-producing nation, and ultimately help spur its domestic economy. Furthermore. recycling would also help maintain a clean environment and reduce energy consumption. In this paper. the author attempts to discuss opportunities and challenges lied ahead of the US mineral in relation to recovering their much-needed resources from secondary sources. The need and demand in various metals in the US will be reviewed and discussed. The implication of resource recovery from secondary sources will also be discussed. Extraction methods treating secondary sources are inherently different from those for primary sources. There is a need for new technologies which are metallurgically efficient and environmentally benign in treating secondary sources. Ways to meet such a need will be examined and key factors to be considered in approaching these challenges will be discussed.

• 대한금속재료학회지
• /
• 제46권6호
• /
• pp.363-369
• /
• 2008

Effects of top coat morphology and thickness on thermal fatigue behavior of thermal barrier coatings (TBC) were investigated in this study. Thermal fatigue tests were conducted on three coating specimens with different top coat morphology and thickness, and then the test data were compared via microstructures, cycles to failure, and fracture surfaces. In the air plasma spray specimens (APS1, APS2), top coat were 200 and $300{\mu}m$ respectively. The thickness of top coat was about $700{\mu}m$ in the perpendicular cracked specimen (PCS). Under thermal fatigue condition at $1,100^{\circ}C$, the cycles to top coat failure of APS1, APS2, and PCS were 350, 560 and 480 cycles, respectively. The cracks were initiated at the interface of top coat and thermally grown oxide (TGO) and propagated into TGO or top coat as the number of thermal fatigue cycles increased. For the PCS specimen, additive cracks were initiated and propagated at the starting points of perpendicular cracks in the top coat. Also, the thickness of TGO and the decrease of aluminium concentration in bond coat do not affect the cycles to failure.

• 대한금속재료학회지
• /
• 제49권9호
• /
• pp.739-745
• /
• 2011

Beta-type alloys are the most versatile class of titanium alloys. They offer the highest strength to weight ratios and very attractive combinations of strength, toughness, and fatigue resistance inlarge cross sections [1]. The present study was made to obtain useful information for the design of ${\beta}$-type titanium alloys with high-strength properties by using the $DV-X{\alpha}$ method. Employing two calculated parameters, the bond order (Bo) and the d-orbital energy level (Md) of alloying elements in ${\beta}$-type titanium alloy was introduced and used for prediction of mechanical properties. Thus, high-strength titanium alloys were designed by calculating the Md and Bo values of the previous and present titanium alloys.

• 자원리싸이클링
• /
• 제14권2호
• /
• pp.43-55
• /
• 2005

세계의 인구증가와 경제성장에 따라 천연자원 특히 전략금속의 수요가 급격히 증가하고 있다. 국가가 보유하고 있는 자원의 양은 천연자원 뿐 아니라 재활용을 통하여 얻을 수 있는 폐자원을 함께 포함해야 한다. 본 연구에서는 전략금속의 안정적 확보와 폐자원의 효율적 재활용을 위하여 코발트의 국내외 사용현황 등을 조사하였으며 아울러 미국 내에서의 코발트 물질흐름에 대한 자료를 정리하였다. 그 결과 미국에서는 2003년도에 약 8,000톤의 코발트가 사용되었으며 원료로 재사용된 스크랩의 양은 총사용량의 28%인 2,200톤이었다. 미국의 경우 초합금과 촉매의 재활용은 잘 이루어지고 있으나 자석류와 초경합금의 경우 재활용율이 다소 낮음을 알 수 있었다.

• 자원리싸이클링
• /
• 제24권4호
• /
• pp.67-75
• /
• 2015

국내 석탄화력발전소 11곳의 석탄회(비산재, 바닥재 및 매립회) 및 매립장 상등수를 채취하여 희유금속의 함량분포를 살펴보았다. 주요 전략광물인 이트륨(Yttrium) 및 네오디뮴(Neodymium)의 경우 약 23 ~ 75 mg/kg 범위로 나타났으며 별도의 회수기술 개발에 대한 가치가 충분한 것으로 판단되었다. 연간 발생하는 비산재 및 바닥재와 더불어 매립회의 양을 감안하면 국내 석탄화력발전소가 보유하고 있는 희유금속은 약 1.67조 원의 가치가 있는 것으로 조사되어 도시광산으로서 충분한 경제적 가치가 있는 것으로 판단된다.

• 복식문화연구
• /
• 제24권4호
• /
• pp.498-510
• /
• 2016

As social media are emerging as essential communication channels for corporates in all areas, luxury jewelry brands have implemented enhanced strategies for brand story videos by creating brand channels on YouTube. In this study, a comparative analysis of the videos made available by Cartier and Tiffany&Co. on their YouTube Brand Channels was conducted, with the aim of identifying their strategic characteristics. The research method encompassed, both literature review and empirical investigations. A quantitative analysis was conducted by means of the 'HEART' model, a type of luxury jewelry brand story, and the following common strategic elements were identified. First, in their brand story videos both brands focus primarily on 'theme'. Second, 'relationship' and 'artisanship' are emphasized in addition to 'theme'. Third, the videos incorporate high level aesthetics to stimulate the fantasies and dreams of their audiences. The strategic differences between the brands are as follows. : First, 'artisanship' is given the greatest significance along with 'theme' in Cartier videos, while 'relationship' has prime significance in Tiffany&Co. videos. Second, a difference between a European approach and an American approach towards luxury brand building is evident, with Cartier hosting exhibitions while Tiffany&Co. provides gala videos instead.

• 자원리싸이클링
• /
• 제30권5호
• /
• pp.3-9
• /
• 2021

우리나라에서 연, 아연, 동, 주석, 니켈, 알루미늄 등의 베이스메탈의 수급구조는 양극화된 특성을 지니고 있다. 연, 아연, 동 등은 국내에 세계적 규모의 생산기업이 있는 반면, 주석, 니켈, 알루미늄 등은 국내 생산기업이 전무하거나, 생산량이 미비하여 내수량의 대부분을 수입에 의존하고 있다. 따라서 베이스메탈의 수입중단 또는 국내생산기업의 생산 중단 등의 공급중단에 따른 리스크에 대한 대비가 필요하다. 본 연구에서는 베이스메탈 6종(구리, 연, 아연, 알루미늄, 니켈, 주석)을 대상으로 수입중단 리스크 발생 시 대응이 필요한 물량과 시장이 대응할 수 있는 물량, 정부가 대응해야 하는 물량(전략비축)을 정량화하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.230-234
• /
• 2009

It is significant technique to increase competitiveness that solar cells have a high energy conversion efficiency and cost effectiveness. When making high efficiency crystalline Si solar cells, evaporated Ti/Pd/Ag contact system is widely used in order to reduce the electrical resistance of the contact fingers. However, the evaporation process is no applicable to mass production because high vacuum is needed. Furthermore, those metals are too expensive to be applied for terrestrial applications. Ni/Cu/Ag contact system of silicon solar cells offers a relatively inexpensive method of making electrical contact. Ni silicide formation is one of the indispensable techniques for Ni/Cu/Ag contact sytem. Ni was electroless plated on the front grid pattern, After Ni electroless plating, the cells were annealed by RTP(Rapid Thermal Process). Ni silicide(NiSi) has certain advantages over Ti silicide($TiSi_2$), lower temperature anneal, one step anneal, low resistivity, low silicon consumption, low film stress, absence of reaction between the annealing ambient. Ni/Cu/Ag metallization scheme is an important process in the direction of cost reduction for solar cells of high efficiency. In this article we shall report an investigation of rapid thermal silicidation of nickel on silngle crystalline silicon wafers in the annealing range of $350-390^{\circ}C$. The samples annealed at temperatures from 350 to $390^{\circ}C$ have been analyzed by SEM(Scanning Electron Microscopy).

• 한국환경농학회지
• /
• 제27권4호
• /
• pp.395-405
• /
• 2008

The objective of this study was to set priority for future core technologies in agricultural and environmental science using analytic hierarchy process(AHP). Forty-six technologies were derived by specialist meetings. Evaluation criteria, for setting the priority were decided as 'technology', 'marketability', and 'public'. Eighteen specialists in agricultural and environmental science answered to the questionnaire for AHP. As the results, 'technology' was decided as the most important evaluation criterion. The 'Feasibility' in 'technology' criterion, 'Market Growth' in 'marketability' criterion, and 'Impact to other industry' in 'public' criterion were decided as sub-criteria in each criterion. The most important technology was 'Risk assessment of toxic heavy metals and establishment of accreditation criteria for environmentally friendly agricultural products.