• Proceedings of the Korean Geotechical Society Conference
• /
• 1995.10a
• /
• pp.15.2-22
• /
• 1995

Evaluating stiffness of near-surface materials has been one of the critically important tasks in many civil engineering works. It is the main goal of geotechnical characterization. The so-called deflection-response method evaluates the stiffness by measuring stress-strain behavior of the materials caused by static or dynamic load. This method, however, evaluates the overall stiffness and the stiffness variation with depth cannot be obtained. Furthermore, evaluation of a large-area geotechnical site by this method can be time-consuming, expensive, and damaging to many surface points of the site. Wave-propagation method, on the other hand, measures seismic velocities at different depths and stiffness profile (stiffness change with depth) can be obtained from the measured velocity data. The stiffness profile is often expressed by shear-wave (S-wave) velocity change with depth because S-wave velocity is proportional to the shear modulus. that is a direct indicator of stiffiiess. The crosshole and downhole method measures the seismic velocity by placing sources and receivers (geophones) at different depths in a borehole. Requirement of borehole installation makes this method also time-consuming, expensive, and damaging to the sites. Spectral-Analysis-of-Surface-Waves (SASW) method places both source and receivers at the surface, and records horizontally-propagating surface waves. Based upon the theory of surfacewave dispersion, the seismic velocities at different depths are calculated by analyzing the recorded surface-wave data. This method can be nondestructive to the sites. However, because only two receivers are used, the method requires multiple measurements with different field setups and, therefore, the method often becomes time-consuming and labor-intensive. Furthermore. the inclusion of noise wavefields cannot be handled properly, and this may cause the results by this method inaccurate. When multi-channel recording method is employed during the measurement of surface-waves, there are several benefits. First, usually single measurement is enough because multiple number (twelve or more) of receivers are used. Second, noise inclusion can be detected by coherency checking on the multi-channel data and handled properly so that it does not decrease the accuracy of the result. Third, various kinds of multi-channel processing techniques can be applied to f1lter unwanted noise wavefields and also to analyze the surface-wavefields more accurately and efficiently. In this way, the accuracy of the result by the method can be significantly improved. Fourth, the entire system of source, receivers, and recording-processing device can be tied into one unit, and the unit can be pulled by a small vehicle, making the survey speed very fast. In all these senses, multi-channel recording of surface waves is best suited for a routine method for geotechnical characterization in most of civil engineering works.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.221-229
• /
• 2002

Japanese encephalitis virus (JEV) persistence was established and maintained in Vero cell culture for over 1 year. Eleven clones of plaque morphology mutant JEV, with large and small plaque sizes, were obtained from the cell culture supernatant. Genomic RNA replication efficiency of the mutants in naive Vero cell appeared to correspond to their different plaque sizes. No significant changes in envelop protein ORF or in non-coding regions at both ends of the RNA genome suggested that there could be an unidentified factor(s) playing role in JEV attenuation. Unlike to the replication of wild-type JEV, the mutants did not induce severe degree of cytopathic effect in Vero cells upon infection. While obvious decrease of Bcl-2 and its mRNA expression and sharp increase of p53 in naive Vero cells infected with either wild-type JEV or the large plaque-forming mutant, those changes were not observed with the small plaque-forming one. Together with these observation, internucleosomal DNA fragmentation and chromosomal DNA profile in the Vero cells infected with the mutants suggest that an overall changes in cytopathic effect in the plaque morphology mutants-infected cells should be primarily due to the reduced genomic RNA replication and the compromised degree of p53-independent apoptosis by the virus infection at least in part.

• The Korean Journal of Mycology
• /
• v.39 no.1
• /
• pp.39-43
• /
• 2011

A new cultivar "Dan Bi" of Pleurotus eryngii was developed by the method of mono-mono crossing between monokaryotic strains derived from KNR2312 and KNR2596. The parental strains, KNR2312 and KNR2596, are characterized by the property of high quality and a small number of primordia formation, respectively. The optimum temperature of mycelial growth was 25 and that of fruiting body development was $15{\sim}16^{\circ}C$. The period of harvesting including primordia formation was 0.7~1.3 days later than that of control strain Knneutari No. 3 in the culling cultivation. The color of pileus and stipe surface was neutral-brown and pure white, respectively. The shape of pileus was dome and has a scale like as cobweb. The yield was $93{\pm}9.7$ g per 850 cc of plastic bottle. Analysis of the genetic characteristics of the new commercial variety "Dan Bi" showed a different profile as that of the control strain, Knneutari No. 3, when RAPD (Random Amplified Polymorphic DNA) primer #8005 was used. This new variety "Dan Bi" of Pleurotus eryngii is characterized by a small number of primordia formation after scratching.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1095-1100
• /
• 2014

Keratin wastes are generated in excess of million tons per year worldwide and biodegradation of keratin by microorganisms possessing keratinase activity can be used as an alternative tool to prevent environmental pollution. For practical use of keratinase, its physicochemical properties should be investigated in detail. In this study, we investigated characteristics of keratinase produced by Xanthomonas sp. P5 which is isolated from rhizospheric soil of soybean. The level of keratinase produced by the strain P5 increased with time and reached its maximum (10.6 U/ml) at 3 days. The production of soluble protein had the same tendency as the production of keratinase. Optimal temperature and pH of keratinase were $40^{\circ}C-45^{\circ}C$ and pH 9, respectively. The enzyme showed broad temperature and pH stabilities. Thermostability profile showed that the enzyme retained 94.6%-100% of the original activity after 1 h treatment at $10^{\circ}C-40^{\circ}C$. After treatment for 1 h at pH 6-10, 89.2%-100% of the activity was remained. At pH 11, 71.6% of the original activity was retained after 1 h treatment. Although the strain P5 did not degrade human hair, it degraded duck feather and chicken feather. These results indicate that keratinase from Xanthomonas sp. P5 could be not only used to upgrade the nutritional value of feather hydrolysate but also useful in situ biodegradation of feather.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.198-202
• /
• 2018

'Yong-A' was bred by Jeollanamdo Agricultural Research and Extension Services in 2015. It was primarily selected through monospore crossing between JNM21008 and JNM21013 in 2009. The strain is named as JNM-Mi-194 and 'Yong-A', showing major characteristics with good production yield. The cultivation characteristics, yield potential, and fruiting body characteristics of 'Yong-A' are as follows; The wrinkle of the fruiting body was of branching type its shape was wave type. MCM, YM, Malt, and PDA media were suitable for growth of this cultivar. The number of effective stipes was 13 ea/0.9 kg. The minor axis of pileus was 5 cm and the major axis was 9 cm. The yield was 291 g per plastic bag (0.9 kg). Yong-A required 60 days for mycelial running at $20^{\circ}C$. The growth and primordial period required 24 days, which was shorter than that of JNM-Mi-21002 (the conventional cultivar). Somatic incompatibility was observed between parental lines and Yong-A. Analysis of genetic diversity in the new variety 'Yong-A' showed a different profile compared to that of the parent strain when Random Amplified Polymorphic DNA primers were used.

• Earthquakes and Structures
• /
• v.5 no.2
• /
• pp.161-205
• /
• 2013

We study seismically induced, anti-plane strain wave motion in a non-homogeneous geological region containing tunnels. Two different scenarios are considered: (a) The first models two tunnels in a finite geological region embedded within a laterally inhomogeneous, layered geological profile containing a seismic source. For this case, labelled as the first boundary-value problem (BVP 1), an efficient hybrid technique comprising the finite difference method (FDM) and the boundary element method (BEM) is developed and applied. Since the later method is based on the frequency-dependent fundamental solution of elastodynamics, the hybrid technique is defined in the frequency domain. Then, an inverse fast Fourier transformation (FFT) is used to recover time histories; (b) The second models a finite region with two tunnels, is embedded in a homogeneous half-plane, and is subjected to incident, time-harmonic SH-waves. This case, labelled as the second boundary-value problem (BVP 2), considers complex soil properties such as anisotropy, continuous inhomogeneity and poroelasticity. The computational approach is now the BEM alone, since solution of the surrounding half plane by the FDM is unnecessary. In sum, the hybrid FDM-BEM technique is able to quantify dependence of the signals that develop at the free surface to the following key parameters: seismic source properties and heterogeneous structure of the wave path (the FDM component) and near-surface geological deposits containing discontinuities in the form of tunnels (the BEM component). Finally, the hybrid technique is used for evaluating the seismic wave field that develops within a key geological cross-section of the Metro construction project in Thessaloniki, Greece, which includes the important Roman-era historical monument of Rotunda dating from the 3rd century A.D.

• Journal of the Korean Home Economics Association
• /
• v.42 no.2
• /
• pp.213-227
• /
• 2004

This study was attempted to investigate the sensory and textural characteristics of mungbean starch gels with soy bean oil and sucrose fatty acid ester(SE) addition during room temperature storage. Freshly prepared mungbean starch gels, with and without soy bean oil and SE, were stored at 25$^{\circ}C$ for 24, 48 and 72 hours. The color value, syneresis, texture and sensory properties of the gels were measured. The lightness(L) of the gels with soy bean oil and without additives was similar whereas that with SE was lower than that without additives. Syneresis of the gels with soy bean oil and SE was lower than that without additives. Rupture stress, rupture strain and rupture energy of the freshly prepared gel with 2∼4% soy bean oil were increased, but there were no differences in rupture properties between the gel with soy bean oil and that without additives. Rupture stress, rupture stain and rupture energy of all the gels with SE were decreased. Addition of soy bean oil to the gel did not change the texture profile of the gel, whereas hardness, springiness and chewiness of the gel with SE were decreased. In sensory evaluation, the acceptability of freshly prepared gel with soy bean oil was similar to that without additives, whereas that of the gel with 2% soy bean oil stored for 24 hours was higher than that without additives. The acceptability of the gel with SE was decreased significantly.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.5
• /
• pp.425-431
• /
• 2005

The systems-level analysis of microbes with myriad of heterologous data generated by omics technologies has been applied to improve our understanding of cellular function and physiology and consequently to enhance production of various bioproducts. At the heart of this revolution resides in silico genome-scale metabolic model, In order to fully exploit the power of genome-scale model, a systematic approach employing user-friendly software is required. Metabolic flux analysis of genome-scale metabolic network is becoming widely employed to quantify the flux distribution and validate model-driven hypotheses. Here we describe the development of an upgraded MetaFluxNet which allows (1) construction of metabolic models connected to metabolic databases, (2) calculation of fluxes by metabolic flux analysis, (3) comparative flux analysis with flux-profile visualization, (4) the use of metabolic flux analysis markup language to enable models to be exchanged efficiently, and (5) the exporting of data from constraints-based flux analysis into various formats. MetaFluxNet also allows cellular physiology to be predicted and strategies for strain improvement to be developed from genome-based information on flux distributions. This integrated software environment promises to enhance our understanding on metabolic network at a whole organism level and to establish novel strategies for improving the properties of organisms for various biotechnological applications.

• Parasites, Hosts and Diseases
• /
• v.51 no.4
• /
• pp.401-412
• /
• 2013

Because of an increased number of Acanthamoeba keratitis (AK) along with associated disease burdens, medical professionals have become more aware of this pathogen in recent years. In this study, by analyzing both the nuclear 18S small subunit ribosomal RNA (18S rRNA) and mitochondrial 16S rRNA gene loci, 27 clinical Acanthamoeba strains that caused AK in Japan were classified into 3 genotypes, T3 (3 strains), T4 (23 strains), and T5 (one strain). Most haplotypes were identical to the reference haplotypes reported from all over the world, and thus no specificity of the haplotype distribution in Japan was found. The T4 sub-genotype analysis using the 16S rRNA gene locus also revealed a clear subconformation within the T4 cluster, and lead to the recognition of a new sub-genotype T4i, in addition to the previously reported sub-genotypes T4a-T4h. Furthermore, 9 out of 23 strains in the T4 genotype were identified to a specific haplotype (AF479533), which seems to be a causal haplotype of AK. While heterozygous nuclear haplotypes were observed from 2 strains, the mitochondrial haplotypes were homozygous as T4 genotype in the both strains, and suggested a possibility of nuclear hybridization (mating reproduction) between different strains in Acanthamoeba. The nuclear 18S rRNA gene and mitochondrial 16S rRNA gene loci of Acanthamoeba spp. possess different unique characteristics usable for the genotyping analyses, and those specific features could contribute to the establishment of molecular taxonomy for the species complex of Acanthamoeba.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.553-558
• /
• 2010

The behavior of composite piles composed of steel pipe pile in the upper part and concrete pile in the lower part by a mechanical splicing joint was examined by field lateral load tests and bending tests. A total of 7 piles including two instrumented piles for bending test were installed. The soil profile consists of soft clay with weak silt with shallow groundwater level. Laboratory tests were carried out to determine the basic soil characteristics and the strength parameters. This paper presents the composite pile behavior with various portions of the upper steel pile: 0, 20, 30, and 45% of the pile embedded pile length. Three-point bending tests were performed to investigate the stress-strain relation at the mechanical joint. Based on these test results, the behavior of composite piles with various upper steel pile length are evaluated and the stability of mechanical joints are examined. Through comparisons with results of field load tests, it was found that lateral load carrying capacity of the composite piles increased and deflections of the composite piles decreased with increasing the upper steel piles. The mechanical joint was proved to retain its structural stability against the tested load conditions. Economical benefits of composite pile of this kind can be gained by setting adequately the length of the upper steel pipe piles.