• Microbiology and Biotechnology Letters
• /
• v.27 no.4
• /
• pp.292-297
• /
• 1999

Overproduction of L-ornithine by mutant strains isolated from Brevibacterium detoglutamicum BK1046 was investigated. The strain was a L-ornithine auxotroph and exhibited culture instability during fermentation. Through a sequential screening effort, a highly stable strain with lless revertant formation was finally selected and designated B. ketoglutamicum BK52 (KCTC0141BP). It prouduced L-ornithine at a high concentration (above 9 g/L) independent of subculture or cultivation time, and also had a very low tendency of revertant formation. In a long-term storage, this strain maintained its cell stability and productivity of L-ornithine to a reasonable range.

• Korean Journal of Microbiology
• /
• v.17 no.3
• /
• pp.152-159
• /
• 1979

Using Micromonospora strain, gentamicin was produced by fermentation. The increase in gentamicin productivity was studied by strain improvement and systematic optimization of fermentation process variables. The productivity of parent strain of M.purpurea (ATCC15835) was improved by selection of superior mutant after U.V. irradiation and induction of genetamicin resistance. Potato starch and soy bean meal were the best carbon and nitrogen sources for gentamicin fermentation, respectively. The optimum stimulating concentration of Co ion for gentamicin production was 0.006g $CoCl_2$ per liter of broth. Oxygen ws found to be an important factor for gentamicin yield. The optimum pH for the cell growth and gentamicin production were 7.2 and 6.8 respectively. By controlling the pH, oxygen, and other conditions found in this study at the optimal conditions for cell growth and gentamicin production, the total productivity of gentamicin was increased significantly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.178-178
• /
• 1999

Low temperature Si epitaxy can provide flexibility for a device designer to tailor or optimize the device performance. It is better method for controlling the doping thickness, concentration and profile than ion implantation and diffusion. But there is a limited growth thickness in this method. At a given temperature, the film grows epitaxially for a certain limiting thickness(hepi) and becomes amorphous. The transition from crystalline Si to amorphous Si is abrupt. In this study, Si film was deposited by ion beam sputter deposition on Si (0001) above a limiting thickness and measure the strain in the interface between crystalline Si and amorphous Si. The strain was compressive and the maximum value was about 2%.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.378-383
• /
• 2008

Bogie frame of the locomotive is an important structural member for the support of vehicle loading. A lot of study has been carried out for the prediction of the structural integrity of the bogie frame in experimental and theoretical domains. The objective of this paper is to estimate the structural integrity of the bogie frame. Strength analysis has been performed by finite element analysis. From these analysis, stress concentration areas were investigated. For evaluation of the loading conditions, dynamic stress were measured by using strain gage. It has been found that the stress and strain due to the applied loads were multi-axial condition according to the location of strain gage. The fatigue strength evaluations of the bogie frame are performed to investigate the effect of the multi-axial load through the employment of the critical plane approach.

• Journal of Microbiology
• /
• v.34 no.3
• /
• pp.289-293
• /
• 1996

A cadimium-resistant strain isolated from Anyang stream, Azomonas agilis PY101 exhibited strong resistance to 1000 ppm of cadmium ion $(Cd^{2+})$. A agilis PY101 also exhibited resistance to various antibiotics, such as amoxicillin, amplicillin, bacitracin, cefazolin, erythromycin, penicillin, tetracycline, and vancomycin. In the presence of $Cd^{2+}$, the growth of A. agilis PY101 started after an extended lag phase and produced a green-fluorescent pigment induced by cadmium. The dramatic decrease (approximately 400ppm) of concentration of $cd^{2+}$ in the culture medium during the growth phase of A. agilis PY101 was confirmed by the inductively coupled plasma-atomic emission spectrophotometer. Transmission electron microscopic analysis revealed that A. agilis PY 101 actively accumulated $Cd^{2+}$ in the cytoplasm.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.395-398
• /
• 2002

Bioremediation has been showing promise as an alternative to conventional environmental cleanup technologies. The objective of this study is to maximize the degradability of jet fuel in the soil system. The cells isolated from petroleum contaminated site was used for the degradation of jet fuel. When this strain was cultured in the MSM(minimal salt media) containing jet fuel for ten days, the degradability of jet fuel was almost 100%. The concentration of jet fuel did not affect the degradability much and the increased inoculution of strain and addition of nitrogen source decreased the time for complete degradation of jet fuel in the liquid culture. Inoculation of this strain increased the jet fuel degradability in the soil column by 15% and the aeration(50ml/min) and the addition of nutrients($NaNO_3$, $KH_2PO_4$) enhanced the jet fuel degradability(about 90%).

• YAKHAK HOEJI
• /
• v.48 no.1
• /
• pp.70-74
• /
• 2004

Bacillus polyfermenticus SCD which is commonly called as Bisroot (equation omitted) has been appropriately used for the treatment of long-term intestinal disorder's. This strain strongly inhibited against methicillin resistance Staphylococcus aureus (MRSA) and various pathogenic microorganisms. Effects of B. polyfermentius SCD administration on death rates and egg-laying rates in two groups of hens were investigated. This strain decreased the death rates of two groups by 16.26％ and 11.72％, respectively. Also this strain increased the egg-laying rates of those 2.74％ and 2.66％, respectively Clinical tests of B. polyfermenticus SCD administration to healthy adults showed not adverse effects but decreased glyceride concentration from 154.52 mg/dl to 135.41 mg/dl after two week administrations.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.2
• /
• pp.5-8
• /
• 2010

In this study, the effect of bending strain on the transport property and critical current of lap and butt-jointed (non-laminated) BSCCO tapes has been investigated. The samples were joined using a mechanically controlled jointing procedure. To achieve a uniform thickness at the joint a single point loading contact has been devised. GFRP mandrels with different bending radii which support the sample during bending have been used. $I_c$ have been measured at 77 K and self field. In the case of easy bending test for jointed BSCCO tapes, sudden degradation of $I_c$ is caused by the local strain concentration due to non uniform deformation at the edge parts of the joint. In the case of hard bending test of jointed BSCCO tapes transverse macroscopic crack at specific subsection caused a large $I_c$ degradation. The transport property of jointed BSCCO tapes in each bending mode was discussed with the damage morphology occurred.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.103-107
• /
• 2022

Scaffolds are the structures that safely protect sensors in various parts of the body. Because of scaffolds must protect sensors from load, the tensile strength of the scaffolds must be higher than 750 kgf/cm². Currently, the tensile strength of scaffolds made with the 3d printer is 714 kgf/cm². We confirm that the tensile strength of the scaffolds increase using air with high nitrogen concentration. In this study, we conducted experiments to find nitrogen concentrations in which the tensile strength of the specimen is higher than 750 kgf/cm². The nitrogen control device and the nitrogen concentration sensor were installed in the chamber type 3d printer. The nitrogen concentration inside the 3d printer was changed by 5 % from 80 % to 100 %. Specimens of ASTM D 638 standard were produced under changed nitrogen concentration. We measured the tensile strength of specimens. We compared the tensile strength of specimens produced under each nitrogen concentration. We confirmed that when air with nitrogen concentration of 90 % was used, the tensile strength of scaffolds were 762 kgf/cm².

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.283-289
• /
• 2002

This study was performed to search for potential microorganism that has rapid fermenting and physiological function from anchovy sauce. We isolated three bacterial strains, JM-1, JM-2, and JM-3 with proteolytic and fibrinolytic activity from anchovy sauce. Among the 3 bacterial strains, JM-3 showed the strongest proteolytic and fibrinolytic activity. Bacterial strain JM-3 was gram-positive rod, motile and formed endospore. The 16S rRNA of bacterial strain JM-3 was amplified by PCR and then its sequence was determined by ABI 310 genetic analyzer. The 16S rRNA sequence of bacterial strain JM-3 was compared to BLAST DNA database and identified to Bacillus subtilis with 99% of homology. The optimum temperature, pH and NaCl concentration for growth of B. subtilis JM-3 were $40^{\circ}C$, 5.0 and 0%, respectively. The optimum temperature, pH and NaCl concentration for proteolytic and fibrinolytic enzyme production of B. subtilis JM-3 were same as optimum conditions for growth. At 20% of NaCl concentration which is common NaCl concentration of fish sauce, B. subtilis JM-3 showed about 60% of proteolytic and fibrinolytic activity of 0% NaCl concentration. From above results, we found that B. subtilis JM-3 will be able to used for starter of functional fish sauce.