• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.255-260
• /
• 2016

In this paper, a full-wave rectifier (FWR) with a simple vibration detector suitable for use with vibrational energy harvesting systems is presented. Conventional active FWRs where active diodes are used to reduce the diode voltage drop and increase the system efficiency are usually powered from the output. Output-powered FWRs exhibit relatively high efficiencies because the comparators used in active diodes are powered from the stable output voltage. Nevertheless, a major drawback is that these FWRs consume power from the output storage capacitor even when the system is not harvesting any energy. To overcome the problem, a technique using a simple vibration detector consisting of a peak detector and a level converter is proposed. The vibration detector detects whether vibrational energy exists or not in the input terminal and disables the comparators when there is no vibrational energy. The proposed FWR with the vibration detector is designed using a $0.35-{\mu}m$ CMOS process. Simulation results have verified the effectiveness of the proposed scheme. By using the proposed vibration detector, a decrease in leakage current by approximately 67,000 times can be achieved after the vibration disappears.

• Journal of Navigation and Port Research
• /
• v.29 no.9
• /
• pp.789-793
• /
• 2005

The container terminals in Korea usually adopts both the bar code and the image recognition systems at the gate complex to capture necessary information on containers passing through the gate. With the rapid advancement of Information Technology(IT) these systems, however, seem to make the user not satisfied due to the inherent limitations such as the long process time taken, low rate of recognition etc., This paper, therefore, examines the adoption of Radio Frequency Identification (RFID) technology to container terminals, and tried to get some implication for the way to improve the productivity of the terminal. The results imply that some improvement in the gate and storage yard operation is feasible by the benefit of using the information of vehicles and containers collected in advance by RFID technology.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.191-202
• /
• 1997

As the suitability of berth allocation will ultimately have a significant influence on the performance of a berth, a great deal of attention should be given to berth allocation. Generally, a berth allocation problem has conflicting factors between servers and users. In addition, there is uncertainty in great extent caused by various factors such as departure delay, inclement weather on route, poor handling equipment, a lack of storage space, and other factors contribute to the uncertainty of arrival and berthing time. Thus, it is necessary to establish berth allocation planning which reflects the positions of interested parties and the ambiguity of parameters. For this, a berth allocation problem is formulated by fuzzy 0-1 integer programming introducing the concept of maximum Position Shift(MPS). But, the above approach has limitations in terms of computational time and computer memory when the size of problem is increased. It also has limitations with respect to the integration of other sub-systems such as ship planning system and yard planning system. For solving such problem, this paper focuses particularly on developing an efficient heuristic algorithm as a new technique of getting an effective solution. And also the suggested algorithm is verified through the illustrative examples and empirical appalicaton to BCTOC.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.827-837
• /
• 2022

If the hydrogen industry is activated, the introduction of C-type and pressurized liquefied hydrogen (LH2) tank suitable for small and medium-sized transp- ortation and storage will be given priority in the future. Therefore in this paper, the behavior for the LH2 property changes and boil-off gas (BOG) treatment of the C-type cargo tank through voyage of the LH2 carrier and pressurized tank of the LH2 receiving terminal were analyzed through computational simulations by making assumptions about the carrier operation and unloading conditions.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.4
• /
• pp.231-236
• /
• 2002

We studied the residual patterns of two fungicides, dichlofluanid and iprodione, in cherry tomato greenhouse after applying with the recommended and double dose. Also, the degradation patterns during storage periods of up to ten days were compared between at room temperature (20$^{\circ}C$) and at cold temperature (4$^{\circ}C$). Removal rates of fungicides by washing with tap-water and detergent solution (0.1%, 0.2%) were measured. Half-lives of dichlofluanid and iprodione in greenhouse cherrytomato were 2.2$\sim$3.5 and 3.3$\sim$5.4 days, respectively. During the storage period, the residues were dissipated more slow. Removal rates were 62.8$\sim$80.3% by tap-water, 60.4$\sim$83.1% by 0.1% detergent solution, and 65.3$\sim$77.6% by 0.2% detergent solution. So, we can predict of terminal residues from cultivation period to marketing, storage and consuming.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.107-114
• /
• 2016

Purpose - Loading can decrease the productivity due to the possibility of carrying out with the opposite order of storage in container terminal. When the container is to be taken out, it is needed to move the container stacked upon the container to be carried out to other place temporarily. It is called as rehandling. Remarshalling, with the loading plan, is the arranging the containers before the ship arrives in order to avoid the rehandling during the carrying out. The present study tried to find out the factors affecting the efficiency when building the remarshalling plan with the utilization of neighboring storage space as a outer slot, and analyzed the efficiency of several remarshalling algorithms with the combination of those factors. Research design, data and methodology - The present study used, when the remarshalling plan is prepared for utilizing the outer slot, the simulation methods in order to compare the efficiency of the remarshalling algorithms which made with the factors affecting the efficiency. The factors affecting the efficiency are the method of making the child node, method of arrangement, and possibility of application of FIX. In order to analyze the affecting factors on the efficiency, several algorithms are prepared with the combination of production of the child node and the arrangement method with the availability of FIX application. With this algorithm, the effect of the factors on the efficiency after building up of remarshalling plan with the target on the bay with 10 rows, 8 columns, and 10 indices. Results - The method of rearrangement and making of a child node as the factor affecting the efficiency of remarshalling utilization of the outer bay were studied. It is efficient to combine the method of making a child node with MCS in order to reduce the number of moving the containers. For reducing the time in carrying out, it was found that all arrangement methods should be combined with RCS for the efficiency. The result of experiment shows the application of FIX with good result in case of succession ratio. In addition, when FIX was not applied, all of the most combinations resulted in short time in remarshalling. As a result, it can be concluded that the algorithm with proper combination of making the child node and the arrangement can increase the job efficiency based on the importance. Conclusion - The present study suggested and analyzed the algorithms with the combination of the arrangement method, the making of child node, and FIX. It is needed to develop the algorithm to judge the possibility whether the best remarshalling plan can be built or not within the bay in order to find a better method between the two cases such as within the bay and outer the bay. As a method for extending the study on the factors affecting the efficiency, it is possible to find out the way to build the remarshalling plan within the permitted time under any storage situation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.426-439
• /
• 1999

본 논문에서는 웹(World Wide Web)에서 사용자가 손쉽고 편리하게 이용할 수 있는 멀티미디어 대중교통 안내시스템 개발 경험을 소개한다. 개발된 시스템은 클라이언트와 서버 시스템, 경로탐색 시스템, 교통정보 저장 시스템, 노선 및 정류장 관리 시스템으로 구성되어 있다. 클라이언트에서 작동되는 사용자 인터페이스는 직관적으로 이해가 쉽고, 사용이 편리하며 인터액티브한 멀티미디어 대중 교통안내 서비스를 제공한다. 서버 시스템은 교통정보 수집 시스템으로부터 입력되는 데이타와, 경로탐색 시스템, 교통정보 저장 시스템과 연동되어 클라이언트의 요구사항을 처리하고 그 결과를 사용자에게 돌려준다. 수정된 A* 알고리즘을 이용하는 경로탐색 시스템은 최적경로를 탐색하며, 교통정보 저장 시스템은 현재 교통상황, 정류장, 노선, 지도 등의 정보를 저장한다. 노선 및 정류장 관리시스템은 시스템 관리자가 노선 또는 정류장 관리를 서버 화면의 지도상에서 효율적으로 수행할 수 있는 도구이다. 본 논문에서 다루는 대중교통 안내시스템은 Java로 구현하였기 때문에 확장과 이식이 용이하며, 시스템 유지보수 비용이 적게 드는 장점을 가지고 있다. 그리고, 웹 브라우저가 동작되는 환경에서는 어디서나 쉽게 접근이 가능하며 향후 구축될 Intelligent Transportation Systems(ITS)의 한 모듈로써 바로 작동될 수 있을 뿐만 아니라, 현재 인터넷상에서 제공되는 다양한 서비스와도 연동이 가능하다.Abstract This paper introduces our experience for developing a public transportation guidance system, which facilitates the World-Wide Web(WWW) to provide users with easier access and use. The proposed system is composed of four subsystems: client/server system, path search system, traffic data storage system, and traffic raw-data management system. The user interface in clients utilizes Java to furnish users with multimedia data accessibility and interactivity. The server processes clients' requests based on the traffic data coming from remote sensing devices and interacts with the path search system and traffic data storage system to provide users with the results. The path search system, which uses a modified A* algorithm, produces optimal solutions based on dynamic traffic data. The traffic data storage system stores the current traffic information together with the geographical information about the b$us_way routes. The traffic raw-data management system is a graphical user interface which enables the system manager to handle the traffic information easily on the map in the terminal screen. The system has considerable benefits such as portability, scalability, and flexibility since it is implemented using Java. Also, it can be extended to an integrated Intelligent Transportation Systems(ITS) which includes a variety of information on the Internet as well as traffic information.n.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.547-554
• /
• 2010

Low-molecular-weight glutenin subunit (LMW-GS) in common wheat (Triticum aestivum L.) is important for quality processing of bread and noodles. The objectives of this study were to clarify the composition of LMW-GSs and to identify their corresponding proteins. Using LMW-GS specific primers we cloned and characterized 43 LMW-GS genes in the wheat cultivar 'Jokyoung'. Some of these genes contain polypeptides different in size due to the presence of various deletions or insertions within repetitive and glutamine-rich domains. The comparison of deduced amino acid sequence of the LMW-GS genes in Jokyoung with that of 12 groups LMW-GSs of wheat cultivar Norin 61 showed that the deduced amino acid sequences were nearly the same to LMW-GS groups of 1, 2, 3/4, 5, 7, 10 and 11. All LMW-GS genes contain eight cysteine residues, which are conserved among all of the typical LMW-GS sequences. The relative positions of cysteine residues are also conserved, except those of the first and seventh. Based on phylogenetic analysis, the 43 sequences with the same N-terminal and C-terminal amino acid sequences were clustered in the same group. To identify the proteins containing the corresponding amino acid sequences, we determined the N-terminal amino acid sequence of 7 spots of LMW-GSs of Jokyoung separated by two-dimensional gel electrophoresis (2DE). Of them, Glu-B3 (LMW-m and LMW-s) and Glu-D3 (LMW-m) were detected in two and three spots, respectively and the others were not clear. Collectively, we classified diverse LMW-GSs and identified their corresponding protein products. These results will be helpful in breeding programs for improvement of wheat flour quality.

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.117-128
• /
• 2021

In order for the users (shipping firms and shippers) and suppliers (stevedoring firms) in the container terminal industry to win-win, it is necessary to have some appropriate diverse market conditions for the industry. This study analyses the basic conditions and demand and supply characteristics of the industry and investigates the market performance of Busan container ports. First, this article analyses the basic characteristics of demand and supply. As the demand characteristics, there are five ones such as 1) exogeneity of demand, 2) function as export/import transportation and hub for transshipment, 3) increase of users' bargaining power, 4) high substituting elasticity, 5) reduction of volume growth. As the supply characteristics, there are seven ones such as 1) inelasticity of supply, 2) homogeneity of stevedoring services, 3) over-supply, 4) adoption of cutting-edge stevedoring technology, 5) scale economy and impossibility of storage, 6) labor market rigidity, 7) enhancing port's role in SCM. In addition, this study conducts the so-called structure-conduct-performance analysis. For the structure analysis, 1) lacks of scale economy in stevedoring companies, 2) high entry barrier, 3) strengthening of shipping firms' bargaining power, 4) transitory permission scheme for tariff are analyzed. For the conduct analysis, 1) price discrimination between export/import and transshipment, 2) mid-term length of terminal use contract, 3) continuous investment in equipment, 4) low level of cooperation among terminal operating firms are derived. For the performance analysis, 1) inequality in profitability, 2) reduction of export/import cost, 3) delay in adopting cutting-edge technology, 4) idle equipment are analyzed. Following this logical flow, the hypothesis that the market structure influences the market conduct is tested based on the actual dataset. As a future agenda in the conclusion, this article recommends the so-called port industrial policy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.12-21
• /
• 2006

Recently, Very large and high resolution geological data from aerial or satellite imagery are available. Many researches and applications require to do realtime visualization of interest geological area or entire planet. Important operation of wide-spreaded terrain realtime visualization technique is the appropriate model resolution selection from pre-processed multi-resolution model hierarchy depend upon participant's view. For embodying such realtime rendering system with large geometric data, Preprocessing multi-resolution hierarchy from large scale geological information of interest area is required. In this research, recent Cubic multiresolution 4-8 tile hierarchy is selected for global planetary applications. Based upon the tile hierarchy, It constructs the selective terminal level tile mesh for original geological information area and starts to sample individual generated tiles for terminal level tiles. It completes the hierarchy by constructing intermediate tiles with low pass filtering in bottom-up direction. This research embodies series of efficient cubic 4-8 tile hierarchy construction mechanism with out-of-core storage. The planetary scale Mars' geographical altitude data and image data were selected for the experiment.