• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.101-108
• /
• 2011

In forest work, working conditions are very hard to improve. The proper distribution of work time and good posture is believed to bring about direct improvements such as accident prevention. On this, this study has analyzed forest workers' posture and their working hours in order to improve their working conditions in stone channel work. Authors has chosen several core elements of stone channel work to focus on, which include stone masonry, excavation of bed, moving stone, directing work, choosing stone, and breaking stone. The ratio of real working time over total working time was shown as 84.6%. As for the time ratio of each elemental work over the real working time, the stone masonry was 60.4%, the directing work was 15.1%, moving stone was 12.1%, choosing stone was 7.1%, breaking stone was 3.3%, and excavation of bed was 2.0%. According to the analytical results provided by OWAS, the ratio of category III (Work posture has a distinctly harmful effect on the musculoskeletal system) has shown that moving stone turned out 65.2%, choosing stone was 61.5%, stone masonry was 46.1%, breaking stone was 14.3%, excavation of bed was 12.5% and directing work was 6.8%. Furthermore, the ratio of category IV (Work posture with an extremely harmful effect on the musculoskeletal system) has shown that excavation of bed turned out 37.5%, breaking stone was 28.6%, stone masonry was 27.3%, choosing stone was 7.7%, moving stone was 6.1% and directing working was 4.5%. These results are expected to be utilized for the improvement with respect to both working methods in the stone channel work and the workers' working posture.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.251-262
• /
• 2004

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by shotball blasting. To developement of equipment, There is to be down noise and dust. Acording to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor. We have taken Taguchi's parameter design approch, specifically orthogonal array, and determined the optimal levels of stone surface through analysis of the experimental results using SIN ratio.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.3
• /
• pp.31-38
• /
• 2003

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by water jet To development of equipment, There is to be down noise and dust. According to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.838-845
• /
• 2006

Recently construction work in Korea, demands of favorable condition ground had been increased with industrialization acceleration and economic growth. However, because of limited land space, it was so hard to ensure favorable condition grounds that construction work proceeds until soft ground area on plans of road, railroad and industrial complex. In this case, soft ground improvement was required such as a stone column method. Stone column method, making a compaction pile using crushed stone, is a soft ground improvement method. However, stone column method is difficult to apply to the ground which is not mobilized enough lateral confine pressure because no bulging failure resistance. Hence, in present study, evaluates the stone columns reinforced by geogrid for settlement reduction and wide range of application of stone columns. Triaxial compression tests were conducted for evaluation which is about behavior characteristics of stone column on replacement rate. Then, 3-dimensional numerical analysis were conducted for application of stone column reinforced by geogrid as evaluate behavior characteristics and settlement reduction effect of stone column reinforced by geogrid on reinforcing depth change of geogrid.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.171-181
• /
• 2004

A multi axis whetstone polishing system, which uses the flow system of the stone polishing machine head, has been developed. The test results show that the defect by line contact polishing does not occur in both ends of the stone and that it came to trim smoothly. In terms of the surface roughness, the corresponding index was decreased by 3.6 times, improving the polishing effect greatly. It decreased significantly the dust and noise with the wet polishing. The factors of the duty evasion at production site can thus be solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.165-170
• /
• 2004

It used the flow system of the stone polishing machine head and it developed a multi axis whetstone polishing system. With the result, the defect by line contact polishing does not occur in both ends of the stone, and it came to trim smoothly. As the index of the surface roughness decreased to 3.6 times, the polishing effect improved greatly. It decreased greatly the dust and a noise with the wet polishing, and the factors of the duty evasion at production site were solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.75-81
• /
• 1992

An experimental investigation has been carried out to evaluate the characteristics in wastewater treatment using an anaerobic packed bed bioreactor with ceramics, rubber sponge, soft stone A, and soft stone B as carrier. The results of the work have shown that soft stone A as a carrier was superior to other carriers in methane production, then the content of methane for soft stone A was about 70%. First of all, soft stone A had higher efficiency of the COD removal than the others in response of passing the operation, as well as it had a low volatile acid in reactor. In addition, the slope of methane production with respect to the removal of COD ($m^{3}CH_{4}$/kgCOD) was 0.58 for soft stone A. In biomass hold-up equation for each carriers, the equation of soft stone A was m$_{p}$=714 ($C_{o}/0.41+C_{o}$) and it was the largest in this experimented carriers. Based upon the results obtained, it is suggested that the major effective carrier in wastewater treatments within the packed bed bioreactor used in this experimental work by soft stone A.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.117-121
• /
• 2006

This study intends to suggest the effective methods for water leakage prevention around the windows in stone works to up-grade the outdoor public space that has been taken much portion of apartment housing trends. The subjects of the study was selected among the domestic subcontractors of stone works. There are four methods for water leakage prevention around the windows; Firstly, the painting water-proof method after the masonry. Secondly, the urethane water-proof method after galvanizing panels on the gap. Thirdly, the separation method between stone and substructure and the last one is water-proof method that they put some water-proof screen between stone and substructure with the EPDM sheets. According to the analysis of the water-proof effects, constructability and planning, we could approach to conclusion that the most influent items to the water-leakage are the filling material's deformation, the state of oxygenation and deterioration of work skill. Among the water-proof methods in construction the EPDM sheet is most excellent water-proof method to meet the technical conditions. However, we have to apply it to stone works as a water-proof method for the decrease of the leakage defects after standardizing the materials, test and construction skill because there are many work skills according the subcontractors.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.96-101
• /
• 2024

Background: Silicosis among workers who fabricate engineered stone products in micro or small-sized enterprises (MSEs) was reported from several countries. Workplace exposure data of these workers at high risk of exposure to respirable crystalline silica (RCS) dust are limited. Methods: We surveyed workers performing cutting, shaping and polishing tasks at 6 engineered stone fabricating MSEs in Sydney, Australia prior to regulatory intervention. Personal exposure to airborne RCS dust in 34 workers was measured, work practices were observed using a checklist and worker demography recorded. Results: Personal respirable dust measurements showed exposures above the Australian workplace exposure standard (WES) of 0.1 mg/m³ TWA-8 hours for RCS in 85% of workers who performed dry tasks and amongst 71% using water-fed tools. Dust exposure controls were inadequate with ineffective ventilation and inappropriate respiratory protection. All 34 workers sampled were identified as overseas-born migrants, mostly from three linguistic groups. Conclusions: Workplace exposure data from this survey showed that workers in engineered stone fabricating MSEs were exposed to RCS dust levels which may be associated with a high risk of developing silicosis. The survey findings were useful to inform a comprehensive regulatory intervention program involving diverse hazard communication tools and enforcing improved exposure controls. We conclude that modest occupational hygiene surveys in MSEs, with attention to workers' demographic factors can influence the effectiveness of intervention programs. Occupational health practitioners should address these potential determinants of hazardous exposures in their workplace surveys to prevent illness such as silicosis in vulnerable workers.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.491-498
• /
• 2004

In recent years, as an effort to grasp the leading position in the field of maritime trading, new ports and container terminals arc now under construction. Old ports are extended. At the beginning, stones were thrown down to form stone embankments, that is stone-dams, in the outer and inner boundaries of the planned reclamation-land. S.C.P(Sand Compaction Pile) works are often needed to improve the stability of stone-dams, where marine sediments arc relatively thick. Here, interests are centered on the shape of stone body. In this, drilling work won't provide a sufficient resolution. In addition, the result corresponds to only one borehole point information. Thus, the aim of this paper is to introduce an affordable technology, that is, a combined geophysical method(seismic tomography + Televiewer) enables to get the whole information about stone-dam section. The measuring and evaluating procedure is described in detail with an emphasis on dealing with the use of seismic detonator, proper borehole deployment and integrated data analysis. Examples of field experiments at Busan new port are illustrated, which will prove the benefit of combined geophysical method.