• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.2
• /
• pp.33-42
• /
• 1993

In order to obtain the basic information for the optimal settlement planning in the reclaimed area, various existing settlement conditions on reclaimed farming village were analysed through a case study of in-and-round farming villages in Deuk Ryang Reclaimed Area. By comparison study between in-and-around villages, the allocation policy of farming settlement in the samll and medium scale area was proposed. The results obtained in this study were as follows ; 1.The population structure of the inner village(Ansim village) had become worse than the around village during 1976~1981 period from the viewpoint of total and female emigration ratios. Especially, the originally unbalanced sex ratio of Ansim village had worsen to the unacceptable ratio of 1.5 : 1(male : female). Therefore, the structural stability of the population should be carefully improved in the newly reclaimed farming villages by the systematic long-term controlling machanism.2.The farming status of Ansim village was much lower than the around villages viewing of the cultivated acreage and agricultural machinery stock Therefore, the continuous and intensive governmental support different from the existing farming area should be required for the settling of reclaimed farming. 3. The regularity of the village site as a planned village, though pursed in the first phase of village construction, had been severely disturbed inflowing of squatters. Recently, there are increasing vaccant houses in the village, and the level of living amenities and personal mobility of Ansim village are much lower than the around village. So, now, the physical structure of the village should be improved to the level of village reconstruction or new village construction. 4. The cultivated area of Ansim village leans to the south side which would be unfavoured by the farmers of the around villages, while its distributing pattern should be concentric around the village site. This phenomenon disturbs the central fuction of the planned farming village. In this respect, role assignment, relationship and balance of competence in farming activities should be planned between in-and-around villages in the reclaimed area from the initial stage. 5. Putting together the above results in this study, the farming and living conditions of Ansim village threaten its existence as a planned new farming village in the reclaimed area. And, so, the full scale reconstruction of village structure, including moving to the new site, should be designed as soon as possible. Although further many studies should be carried out, it would be sure that the new village planning should be reconsidered in the small and-medium scale reclamation works.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.163-168
• /
• 1986

This study was carried out to compare the conditions of Korean and Japanese forestry. Two countries were appeared same trend in forestry condition, so our forestry in future can be estimated with compared Japanese forestry, but the results obtained are as follows ; 1) The average forest area per capita of the world, Japan and Korea are 0.9, 0.23 and 0.16 ha, respectively, this means that Korean forest area is not sufficient. The growing stock of forest per capita is $22.5m^3$ in Japan and $3.9m^3$ in Korea, but timber consumptions per capita are $1m^3$ in Japan and $0.2m^3$ in Korea. Those mean that both countries have not a plentiful resource of forestry. 2) The forestry production activity becomes gradually stagnation. Both in Korea and Japan, the reforestation and stumpage felling area show gradually decreasing tendency, the artificial forest ratio of total forest area is, at present, 28% in Korea and 40% in Japan. 3) In forestry demand aspect, the ratio of imported timber is 79% in Korea and 62.4% in Japan. Because the price index of timber is lower than the general price index, the dullness of forestry-related industries is expected in future. 4) The forestry labour supply has gradually difficulty because of the reduction in farming labour. 5) The managements of national forests show deficit operation, at present, both in Korea and Japan. The results above mentioned are derived form the poor forest resources, therefore, it is considered that rather more and continuous investment is necessary, but also forestry should be invested in the territorial conservation aspect.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.49-58
• /
• 2014

This study was implemented as a part of the experiment to develop two kinds of soil-based Benzo[a]pyrene (BaP) proficiency testing materials (PTMs) for soil analysis. A test was carried out for the check of solubility of the reference material (high purity reagent) using several solvents. Another test was also conducted for the evaluation of homogeneity and stability of two kinds of candidate soil reference materials. The test analysis of BaP in terms of the candidate materials was conducted according to the Standard Soil Analytical Methods by Ministry of Environment. Dissolution of the reference material was shown to vary depending on solvent type and was higher in the order of Dichloromethane > Acetone > Acetone/MeOH (9 : 1) > N-hexane. In addition, the slope on calibration curve for BaP standard solutions was largest on BaP standard solutions prepared with dichloromethane of the tested solvents. Such tendency appeared egually in the commercial BaP standard solution. Therefore, it is thought to be reasonable to use dichloromethane as the solvent in case of the standard stock solution that is used for the measurement of BaP concentration in soil. ISO 13528 and IUPAC protocol were used for verification of homogeneity on the two kinds of soil candidate materials, Both candidate materials were sufficiently homogeneous. Stability assessment of the two candidate materials was made according to ISO Guide 35 and the result showed that both batches did not have any long-term and short term stability issues that might occur during shipping. However, monitoring results of BaP concentration in soil showed that BaP concentration of the two batches measured at 15 days after the sample preparation was reduced by about 24~37% compared with that of the samples measured on 0 day of the sample preparation. Identification was done with several treatments such as irradiation and sterilization etc. The major cause was shown to be irradiation to the samples.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.397-410
• /
• 2018

When considering the long-term safety assessment of spent-nuclear fuel management, americium is one of the most radio-toxic actinides. Although spectroscopic methods are widely used for the study of actinide chemistry, application of those methods to americium chemistry has been limited. Herein, we purified $^{241}Am$ to obtain a highly pure stock solution required for spectroscopic studies. Quantitative and qualitative analyses of purified $^{241}Am$ were carried out using liquid scintillation counting, and gamma and alpha radiation spectrometry. Highly sensitive absorption spectrometry coupled with a liquid waveguide capillary cell and time-resolved laser fluorescence spectroscopy were employed for the study of Am(III) hydrolysis and oxalate (Ox) complexation. $Am^{3+}$ ions under acidic conditions exhibit maximum absorbance at 503 nm, with a molar absorption coefficient of $424{\pm}8cm^{-1}{\cdot}M^{-1}$. $Am(OH)_3(s)$ colloidal particles formed under near neutral pH conditions were identified by monitoring the absorbance at around 506-507 nm. The formation of ${Am(Ox)_3}^{3-}$ was detected by red-shifts of the absorption and luminescence spectra of 4 and 5 nm, respectively. In addition, considerable enhancements of the luminescence intensities were observed. The luminescence lifetime of ${Am(Ox)_3}^{3-}$ increased from 23 to 56 ns, which indicates that approximately six water molecules are replaced by carboxylate ligands in the inner-sphere of the Am(III). These results suggest that ${Am(Ox)_3}^{3-}$ is formed through the bidentate coordination of the oxalate ligands.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.489-496
• /
• 2019

This paper is a study on the evaluation of loss factor of damping treatment materials to reduce the noise and vibration for panels of railway vehicles and automobiles. In order to determine the modal parameters of damping materials, beam excitation tests were carried out using different type PVC coated aluminum and steel base beam specimens. The specimens were excited from 10 Hz to 1000 Hz frequency range using sinusoidal force, and transfer mobility data were measured by using an accelerometer. The loss factors were determined by using integrated program, based on theories of Half Power Method, Minimum Tangent Error Method, Minimum Angle Error Method and Phase Change Method, which enable to evaluate the parameters using modal circle fit and least squares error method. In the case of lower loss factor and data of linear characteristics, any method could be applied for evaluation of parameters, however the case of higher loss factor or data including non-linear characteristics, the minimum angle error method could reduce the loss factor evaluation. The obtained dynamic properties of the coating material could be used for application of Finite Element Method analyzing the noise control effects of complex structures such as carbody or under-floor boxes of rolling stock. The damping material will be very useful to control the structural noise, because the obtained modal loss factors of each mode show very good effect on over $2^{nd}$ mode frequency range.

• Journal of Industrial Convergence
• /
• v.19 no.5
• /
• pp.21-34
• /
• 2021

The purpose of this study is to find out what the investment efficiency of BW is from an investor's point of view and to suggest an efficient investment plan to investors. The research method is to investigate the coupon interest rate, maturity interest rate, issuance date, right exercise start and end date, maturity date, exercise price, etc. for BW issued from 2014 to July 2021. By connecting them, it was attempted to quantitatively understand the efficiency of investment in BW and the effect of new stock acquisitions. As a result of the study, the ratio of the number of days in excess of the exercise price was 41.3% of the available days for new stocks, so it was analyzed that the investment efficiency of bonds with warrants was not high. The return on the exercise start date was 24.8% on average and the return on the end date was 52.6% on average, showing a positive return on average, so it was derived in line with investor expectations. The number of stocks with negative returns on the exercise start date was 1.47 times higher than the number of stocks with positive returns, and the number of stocks with negative returns on the end date was 1.16 times higher than the number of positive stocks.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.5
• /
• pp.1-12
• /
• 2019

It is important to measure the height of trees as an essential element for assessing the forest health in urban areas. Therefore, an automated method that can measure the height of individual tree as a three-dimensional forest information is needed in an extensive and dense forest. Since airborne LiDAR dataset is easy to analyze the tree height(z-coordinate) of forests, studies on individual tree height measurement could be performed as an assessment forest health. Especially in urban forests, that adversely affected by habitat fragmentation and isolation. So this study was analyzed to measure the height of individual trees for assessing the urban forests health, Furthermore to identify environmental factors that affect forest growth. The survey was conducted in the Mt. Bongseo located in Seobuk-gu. Cheonan-si(Middle Chungcheong Province). We segment the individual trees on coniferous by automatic method using the airborne LiDAR dataset of the two periods (year of 2016 and 2017) and to find out individual tree growth. Segmentation of individual trees was performed by using the watershed algorithm and the local maximum, and the tree growth was determined by the difference of the tree height according to the two periods. After we clarify the relationship between the environmental factors affecting the tree growth. The tree growth of Mt. Bongseo was about 20cm for a year, and it was analyzed to be lower than 23.9cm/year of the growth of the dominant species, Pinus rigida. This may have an adverse effect on the growth of isolated urban forests. It also determined different trees growth according to age, diameter and density class in the stock map, effective soil depth and drainage grade in the soil map. There was a statistically significant positive correlation between the distance to the road and the solar radiation as an environmental factor affecting the tree growth. Since there is less correlation, it is necessary to determine other influencing factors affecting tree growth in urban forests besides anthropogenic influences. This study is the first data for the analysis of segmentation and the growth of the individual tree, and it can be used as a scientific data of the urban forest health assessment and management.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.144-150
• /
• 2002

Indian mallow is characterized by the rapid growth and high harvest of the fibrous materials. This study was carried out to investigate the sheet properties of Hanji using Indian mallow, made by different pulping methods, such as alkali and sulfomethylated pulpings and different stock compositions, various mixing ratios of bast fiber, woody core and whole stalk fibers. The results from this study were summarized as follows. The length and width of the bast fibers were 1.40-430 mm(av. 235 mm), and 9.2-26.4 ㎛(av.18.3 ㎛), respectively. The cell wall thickness was 4.0-115 ㎛(av. 7.7 ㎛). Runkel ratio, flexibility coefficient and fiber length/fiber width ratio were 1.38, 0.42 and 128 respectively. Bast fiber and whole stalk were cooked by alkali and sulfomethylated methods. Sulfomethylated pulping resulted in superior pulp in terms of yield and quality as compared with those of alkali pulping. The pulp yields of bast fiber was higher than those of whole stalk

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.151-159
• /
• 2010

Currently, by using the Internet, We can do varius things such as Web surfing, email, on-line shopping, stock trading on your home or office. However, as being out of the concept of security from the beginning, it is the big social issues that malicious user intrudes into the system through the network, on purpose to steal personal information or to paralyze system. In addition, network intrusion by ordinary people using network attack tools is bringing about big worries, so that the need for effective and powerful intrusion detection system becomes very important issue in our Internet environment. However, it is very difficult to prevent this attack perfectly. In this paper we proposed the algorithm for the detection of DoS attacks, and developed attack detection tools. Through learning in a normal state on Step 1, we calculate thresholds, the number of packets that are coming to each port, the median and the average utilization of each port on Step 2. And we propose values to determine how to attack detection on Step 3. By programing proposed attack detection algorithm and by testing the results, we can see that the difference between the median of packet mounts for unit interval and the average utilization of each port number is effective in detecting attacks. Also, without the need to look into the network data, we can easily be implemented by only using the number of packets to detect attacks.

• Korean small business review
• /
• v.41 no.2
• /
• pp.51-78
• /
• 2019

The purpose of this study is to classify unlisted companies' entering method into stock market and to find out a advantageous choice between IPO and SPAC. The research samples are two types(79 IPO companies and 46 SPAC companies) of 125 companies. Which were being listed in the KOSDAQ market from 2010 to 2017. The analysis results are as follows. At first, after analyzing the impact of well known variables such as asset size, company history and number of employees to select listing methods. I found that the variables of asset size and company history have a significant negative (-) effect on the SPAC variable. Secondly, the debt ratio variable has a significant positive (+) effect on the SPAC variable. Third, it was found that the ratio of profitability variables, such as operating income to sales have a systematically positive (+) effect on the SPAC variable. Fourth, I analyzed the impact of the largest stockholder in unlisted companies on the selection of listing methods. I found that the largest stockholder are systematically having a positive (+) effect on SPAC. The result means that unlisted companies that chose SPAC have the larger shareholder shares that are relatively higher than the unlisted companies that chose IPO.