• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.1-21
• /
• 1998

In this paper, a non-conforming 3-D 8-node solid element(MQM10) has beets applied to the analyses of static and dynamic bending problems of laminated composite plates The QM10 element exhibits stiffer bending stiffness which is caused by the reduction of degree of freedom from Q11 element. As an effective way to correct the relative stiffness stiffening phenomenon the modification of Gauss sampling points for composite plates is proposed. The quantity of modification is a function of material properties. Also, another two modified equations are obtained, one is modification for stress, and the other is modification of coefficient of shear modulus in free vibration. It is noted that MQM10 element can analyse the static and free vibration problems of various 3-dimensional composite plates composed of unidirectional laminae, woven laminae or braided laminae. The results of MQM10 element are in good agreement with those of 20-node element.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1309-1317
• /
• 1994

앵커리지 (Anchorage)가 주케이블을 지지하는 전형적인 현수교에서는 행거를 가설한 후에 보강형을 순차적으로 가설하기 때문에 시공시 행거에 별도의 긴장력이 필요없다. 이와는 달리 자정식 현수교는 가교각으로 보강형을 지지한 후 행거를 설치하게 된다. 따라서 행거 가설시 초기 긴장력을 가할 필요가 있으며 이 후 계속되는 시공과정에 의해 장력이 지속적으로 변화하게 된다. 따라서 행거의 가설방법을 변화시켜가며 이에 따른 행거장력의 변화 양상을 파악하여 가장 효율적으로 행거를 가설할 수 있는 방법을 결정할 필요가 있다. 이를 위하여 본 연구에서는 해석적인 방법을 제시하였다. 현수교 시공의 진행에 따라 단계적으로 변화하는 구조계를 모사할 수 있는 사공단계해석 알고리즘을 제시하였다. 또한 자정식 현수교에서 발생할 수 있는 기하비선형 해석모델을 제시하였다. 실물 교량을 대상으로 제시된 해석방법에 따라 가장 효과적이라고 생각되는 시공방법을 제시하였다.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.71-86
• /
• 2018

Thin-walled cross-sections can be optimized to enhance their resistance and progress their behaviour, leading to more competent and inexpensive structural system. The aim of this study is to afford a methodology that would facilitate progress of optimized cold formed steel (CFS) column section with maximum ultimate strength for practical applications. The proposed sections are designed to comply with the geometrical standards of pre-qualified column standards for CFS structures as well as with the number of industrialized and practical constraints. The stiffening evaluation process of CFS lipped channel columns, a five different cross section are considered. The experimental strength and behaviour of the proposed sections are verified by using the finite element analysis (FEA). A series comprehensive parametric study is carried out covering a wide range of section slenderness and overall slenderness ratio of the CFS column with and without intermediate web stiffeners. The ultimate strength of the sections is determined based on the Direct Strength Specification and other design equation available from the literature for CFS structures. A modified design method is proposed for the DSM specification. The results indicate that the CFS column with complex edge and intermediate web stiffeners provides an ultimate strength which is up to 78% higher than standard optimized shapes with the same amount of cross sectional area.

• 대한토목학회논문집
• /
• 제9권3호
• /
• pp.31-38
• /
• 1989

본 논문은 점진적 증가하중에 의한 철근 콘크리트 구조물의 전반적인 거동을 고찰하기 위한 것으로써 콘크리트의 인장균열, 철근 및 콘크리트의 응력-변형을 관계의 비선형성을 고려하였다. 콘크리트는 인장영역에서는 선형 탄성체로 가정하였으며 압축영역에서 탄소성체로 가정하였다. 압축영역의 콘크리트 거동을 파악함에 있어 Kupfer가 제안한 파괴표면 식을 항복한계로 사용 하였으며 associated flow rule에 의해 거동한다고 가정하였다. 철근은 일축응력을 받는 선형의 변형경화 재료로 모델링하였다. 콘크리트의 균열 발생시 인접한 균열 사이의 tension stiffening effect를 고려하였으며 콘크리트 구조물의 해석시 나타나는 유한요소의 크기에 따른 수치해석 오차를 콘크리트 인장부분의 변형연화 영역의 기울기를 보정함으로써 감소시키는 에너지 개념에 의한 ${\epsilon}_0$의 결정 모델 제안하였다.

• 한국강구조학회 논문집
• /
• 제13권6호
• /
• pp.609-619
• /
• 2001

리브로 보강된 가셋트-강관 접합부의 거동은 매우 복잡한 양상을 나타내므로 이론적인 방법으로는 극한강도평가가 불가능하다. 그러므로 본 연구에서는 리브로 보강된 K형 가셋트-강관접합부의 유한요소 해석결과를 실험결과와 비교 분석하여 그 타당성을 입증하고, 유한요소해석에 의한 접합부의 거동을 파악하고 극한강도를 추정하였다. 또한 횡력비, 편심률, 가셋트 길이를 고려한 유한요소해석으로부터 보강효과를 파악하였으며, 보강플레이트의 길이, 높이, 두께의 변화에 따른 해석을 수행하여 합리적인 보강방법을 제안하였다.

• 한국의류학회지
• /
• 제12권2호
• /
• pp.217-223
• /
• 1988

This study is to examine the cleaningproof by dry cleaning runs and parts(shoulder, belly, butt) of garment leathers tanned chrome. This study is composed of three methods of test; color difference test, surface view by scanning electron micrographs, mechanical properties measurement by KES-FB system. The results obtained were as follows: 1. In stiffening of parts of sample, the belly is the best degree in smoothness, fullness, softness. But that of the butt have been found to be the worst degree and to be thick. 2. In fading of parts, the shoulder is an extreme case, but the belly is the best among three parts. 3. In dry cleaning runs, the view after 3 runs has been found to be the best result. 4. The stiffening after dry cleaning 1 run have been low grade, for the sample absorb much solvent of dry cleaning. And, the fading and the decoloration are to be worse after 5 runs. Because the leather surface is affected by dry cleaning runs.

• 전산구조공학
• /
• 제10권4호
• /
• pp.117-130
• /
• 1997

본 논문에서는 등방성판의 인장이나 전단변형은 물론 굽힘문제에도 적용할 수 있는 3차원 고체요소들 중에서 최소의 자유도를 갖는 수정 10절점 상당요소를 제안하였다. 제안된 수정 10절점 상당요소는 Q11요소나 20절점요소로부터 자유도가 줄어듬에 기인한 과대한 굽힘강성을 나타낸다. 이러한 상대적 강성과잉 현상을 수정하기 위한 효과적인 방법으로 가우스 적분점 수정 방법을 제안하였다. 수정량은 포아송 비의 함수이다. 수정 10절점 상당요소의 효과를 여러 가지 예에 적용하여 검증하였다. 제안된 수정 10절점 상당요소에 의한 등방성판의 정적해석과 자유진동 해석의 결과들은 20절점요소를 사용한 결과들과 잘 일치하였다.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.799-827
• /
• 2014

In this paper, a theoretical and experimental study of the sectional behaviour of reinforced concrete beams subjected to short-term loads is carried out. The pure bending behaviour is analysed with moment-curvature diagrams. Thus, the experimental results obtained from 24 beams tested by the authors and reported in literature are compared with theoretical results obtained from a layered model, which combines the material parameters defined in Model Code 2010 with some of the most recognized tensions-tiffening models. Although the tests were carried out for short-term loads, the analysis demonstrates that rheological effects can be important and must be accounted to understand the experimental results. Another important conclusion for the beams tested in this work is that the method proposed by EC-2 tends to underestimate the tension-stiffening effects, leading to inaccuracies in the estimations of deflections. Thus, the actual formulation is analysed and a simple modification is proposed. The idea is the separation of the deflection prediction in two parts: one for short-term loads and other for rheological effects (shrinkage). The results obtained are in fairly good agreement with the experimental results, showing the feasibility of the proposed modification.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1229-1234
• /
• 2005

Since the 20th century, the business of railway was invaded by the invention of airplanes and vehicles in the field of the transportation of passenger and commercial products, however, in the 21st century, the fervent development of a high speed railway made possible the huge capacity of transporting passengers and commercial freight, so the railway industry is facing a new era of railway revolution. The 200 years old railway tradition includes the history of railway bridges built in areas of river, valley and metropolitan region and in that, the number of constructions of railway bridges that is composed of cable-stayed bridges is increasing as one of the most optimal bridges considering the quality of materials and the span of continuous-welded long rail. Thanks to the minimized effects of the fixed load on the stiffening girder section by delivering the fixed load which is applied to the pylon with the composition of elastic supporting points by using cables and the effective structural system that can throughly resist extra loads in addition to fixed load, the long-extended span of a bridge becomes possible. In this structural system, the load that is applied to the stiffening girder section forms a now pattern and in the process of these load delivery, there will be a necessity to examine the concentration of stress occurred in the cable-anchor system of the cable.

• Structural Engineering and Mechanics
• /
• 제56권3호
• /
• pp.473-490
• /
• 2015

This paper presents the analysis of intermediate crack-induced (IC) debonding failure loads for reinforced concrete (RC) beams strengthened with adhesively-bonded fiber-reinforced polymer (FRP) plates or sheets. The analysis consists of the energy release and simple ACI methods. In the energy release method, a fracture criterion is employed to predict the debonding loads. The interfacial fracture energy that indicates the resistance to debonding is related to the bond-slip relationships obtained from the shear test of FRP-to-concrete bonded joints. The section analysis that considers the effect of concrete's tension stiffening is employed to develop the moment-curvature relationships of the FRP-strengthened sections. In the ACI method, the onset of debonding is assumed when the FRP strain reaches the debonding strain limit. The tension stiffening effect is neglected in developing a moment-curvature relationship. For a comparison purpose, both methods are used to numerically investigate the effects of relevant parameters on the IC debonding failure loads. The results show that the debonding failure load generally increases as the concrete compressive strength, FRP reinforcement ratio, FRP elastic modulus and steel reinforcement ratio increase.