DOI QR코드

DOI QR Code

Stiffening evaluation of flat elements towards stiffened elements under axial compression

  • Manikandan, P. (Centre for SONA Structural Engineering Research, Department of Civil Engineering, Sona College of Technology) ;
  • Arun, N. (YS Civil Structural Private Limited)
  • Received : 2016.12.26
  • Accepted : 2017.12.22
  • Published : 2018.01.25

Abstract

Thin-walled cross-sections can be optimized to enhance their resistance and progress their behaviour, leading to more competent and inexpensive structural system. The aim of this study is to afford a methodology that would facilitate progress of optimized cold formed steel (CFS) column section with maximum ultimate strength for practical applications. The proposed sections are designed to comply with the geometrical standards of pre-qualified column standards for CFS structures as well as with the number of industrialized and practical constraints. The stiffening evaluation process of CFS lipped channel columns, a five different cross section are considered. The experimental strength and behaviour of the proposed sections are verified by using the finite element analysis (FEA). A series comprehensive parametric study is carried out covering a wide range of section slenderness and overall slenderness ratio of the CFS column with and without intermediate web stiffeners. The ultimate strength of the sections is determined based on the Direct Strength Specification and other design equation available from the literature for CFS structures. A modified design method is proposed for the DSM specification. The results indicate that the CFS column with complex edge and intermediate web stiffeners provides an ultimate strength which is up to 78% higher than standard optimized shapes with the same amount of cross sectional area.

Keywords

References

  1. AISI: S100-2007 (2007), "North American specification", Specification for the design of cold-formed steel structural members, Washington.
  2. Anil Kumar, M.V. and Kalyanaraman, V. (2012), "Design strength of locally buckling stub-lipped channel columns", J. Struct. Eng., 138, 1291-1299. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000575
  3. Dinis, P.B. and Camotim, D. (2011a), "Post-buckling behaviour and strength of cold-formed steel lipped channel columns experiencing distortional/global interaction", Comput, Struct., 89, 422-434. https://doi.org/10.1016/j.compstruc.2010.11.015
  4. Dinis, P.B. and Camotim, D. (2011b), "Local/distortional/global mode interaction in simply supported coldformed steel lipped channel columns", Int. J. Struct. Stab. Dyn., 11(5), 877-902. https://doi.org/10.1142/S0219455411004385
  5. Dinis, P.B., Camotim, D., Batista, E.M. and Santos, E. (2011), "Local / distortional / global mode coupling in fixed lipped channel columns: Behaviour and strength", Adv. Steel Constr, 7(1), 113-130.
  6. GB 50018-2002, Technical code of cold-formed thin-walled steel structures. Beijing, China; 2002.
  7. IS: 1608-1995(R2006), "Indian specification", Mechanical testing of materials- Tensile testing, India.
  8. Manikandan, P., Sukumar, S. and Balaji, T.U. (2014), "Effective shaping of cold-formed thin-walled builtup beams in pure bending", Arab. J. Sci. Eng., 39, 6043-6054. https://doi.org/10.1007/s13369-014-1261-x
  9. Manikandan, P. and Arun, N. (2016), "Numerical Investigation on cold-formed steel lipped channel columns with intermediate web stiffeners", J. Inst. Eng. India Ser. A, 97(1), 1-7.
  10. Schafer, B.W. and Pekoz, T. (1998), "Direct strength prediction of cold formed steel members using numerical elastic buckling solutions", Proceedings of the 14th Int. Specialty Conf. on Cold-Formed Steel Structures, Univ. of Missouri-Rolla, Rolla, Mo.
  11. Ungermann, D., Lubke, S. and Brune, B. (2014), "Tests and design approach for plain channels in local and coupled local flexural buckling based on eurocode3", Thin. Wall. Struct., 81, 108-120. https://doi.org/10.1016/j.tws.2013.09.013
  12. Wang, C., Zhang, Z., Zhao, D. and Liu, Q. (2016), "Compression tests and numerical analysis of webstiffened channels with complex edge stiffeners", J. Constr. Steel Res., 116, 29-39. https://doi.org/10.1016/j.jcsr.2015.08.013
  13. Yan, J. and Young, B. (2002a), "Column tests of cold-formed steel channels with complex stiffeners", J. Struct. Eng, 128(6), 737-745. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:6(737)
  14. Yan, J. and Young, B. (2004b), "Numerical investigation of channel columns with complex stiffeners-part I: test verification", Thin Wall. Struct., 42, 883-893. https://doi.org/10.1016/j.tws.2003.12.002
  15. Yan, J. and Young, B. (2002d), "Channel columns undergoing local, distortional, and overall buckling", J. Struct. Eng., 128, 728-736. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:6(728)
  16. Yan, J. and Young, B. (2004c), "Numerical investigation of channel columns with complex stiffeners-part II: test verification", Thin Wall. Struct., 42, 895-909. https://doi.org/10.1016/j.tws.2004.01.004
  17. Yang, D. and Hancock, G.J. (2004), "Compression tests of high strength steel channel columns with interaction between local and distortional buckling", J. Struct. Eng., 130(12), 1954-1963. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1954)
  18. Ye, J., Hajirasouliha, I., Becque , J. and Pilakoutas, K. (2016), "Development of more efficient coldformed steel channel sections in bending", Thin Wall. Struct., 101, 1-13. https://doi.org/10.1016/j.tws.2015.12.021
  19. Young, B. (2004), "Design of channel columns with inclined edge stiffeners", J. Constr. Steel Res., 60, 183-197. https://doi.org/10.1016/j.jcsr.2003.09.001