• Journal of Ship and Ocean Technology
• /
• v.9 no.3
• /
• pp.23-32
• /
• 2005

Ship STEP(Standard for the Exchange of Product Model Data) which is composed of AP 215 (Ship Arrangement), AP 216(Ship Hull Form), AP 218 (Ship Structure), has been developed more than last 10 years and it is now at the stage just before IS(International Standard). It is expected that ship STEP would be used for the seamless data exchange among various CAD/CAM/CAE systems of shipbuilding process. In this paper the huge and complicated data structure of ship STEP is briefly reviewed at the level of ARM(Application Reference Model) and some abstract test cases which will be included as part of the standards are introduced. Basically ship STEP has common data model to be used without losing compatibility among those three different ship AP's, and it is defined as the modeling framework. Typical cases of data exchange during shipbuilding process, such as hull form data exchange between design office and model basin, midship structure data between shipbuilding yard and classification society are reviewed and STEP physical data are generated using commercial geometric modeling kernel. Test cases of ship arrangement at initial design stage and hydrodynamic data of crude oil carrier are also included.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.5
• /
• pp.87-93
• /
• 2002

SHACAL is based on the hash standard SHA-1 used in encryption mode, as a submission to NESSIE. SHACAL uses the XOR, modular addition operation and the functions of bit-by-bit manner. These operations and functions make the differential cryptanalysis difficult, i.e, we hardly find a long differential with high probability. But, we can find short differentials with high probability. Using this fact, we discuss the security of SHACAL against the amplified boomerang attack. We find a 36-step boomerang-distinguisher and present attacks on reduced-round SHACAL with various key sizes. We can attack 39-step with 256-bit key, and 47-step with 512-bit key.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.202-211
• /
• 2011

The geometric characteristics of step-pool structures and how they are influenced by channel characteristics were investigated in a steep mountain stream in the Experimental Forests of Kangwon National University in Chuncheon, Gangwon-do. Average values of steps for the study reaches were as follows: step spacing, 4.69 m; step height, 0.47 m; step drop, 0.71 m; step-forming particle sizes, 0.68 m; number, 21steps/ 100 m; the ratio of step spacing to channel width, 0.5; and step steepness, 0.13. Relationships between spacing and height of steps and channel gradient showed a negative- and positive correlation, respectively, whereas all geometric variables of steps manifested poor correlation with channel width. Therefore, step steepness, expressed as the ratio of step height to step spacing, increased as channel gradient increased. The ratio of step steepness to channel gradient representing the criterion of maximum flow resistance was 1.2, indicating the channel bed's stable condition. In particular, the relationship between the ratio of step drop to step height and channel gradient showed a significant negative correlation, suggesting the influence of step-pool geometry in trapping sediment and providing an aquatic habitat. Positive correlations also exist between spacing and drop of steps and step particles. Our findings suggest that the dynamics of step-pool structures may strongly control physical and ecological environments in steep mountain streams, so understanding them is essential for stream management.

• Membrane and Water Treatment
• /
• v.11 no.1
• /
• pp.79-85
• /
• 2020

A single-stage deammonification with a sequencing batch reactor (SBR) that simultaneous nitritation, anaerobic ammonia oxidation (anammox), and denitrification (SNAD) occur in one reactor has been widely applied for sidestream of wastewater treatment plant. For the stable and well-balanced SNAD, a feeding strategy of influent wastewater is one of the most important operating factors in the single-stage deammonification SBR. In this study, single-stage deammonification SBR (working volume 30L) was operated to treat a high-strength ammonium wastewater (1200 mg NH₄⁺-N/L) with different feeding strategies (single feeding and nine-step feeding) under the condition without COD. Each cycle of the step feeding involved 6 sub-cycles consisted of aerobic and anoxic periods for partial nitritation (PN) and anammox, respectively. Contrary to unstable performance in the single feeding, the step feeding showed better deammonification performance (0.565 kg-N/m³/day). Under the condition with COD, however, the nitrogen removal rate (NRR) decreased to 0.403 kg-N/m³/day when the Nine-step feeding strategies had an additional denitrification period before sub-cycles for PN and anammox. The NRR was recovered to 0.518 kg-N/m³/day by introducing an enhanced multiple-step feeding strategy. The strategy had 50 cycles consisted of feed, denitrification, PN, and anammox, instead of repeated sub-cycles for PN and anammox. The multiple-step feeding strategy without sub-cycle showed the most stable and excellent deammonification performance: high nitrogen removal efficiency (98.6%), COD removal rate (0.131 kg-COD/m³/day), and COD removal efficiency (78.8%). This seemed to be caused by that the elimination of the sub-cycles might reduce COD oxidation during aerobic condition but increase the COD utilization for denitrification period. In addition, among various sensor values, the ORP pattern appeared to be applicable to monitor and control each reaction step for deammonification in the multiple-step feeding strategy without sub-cycle. Further study to optimize the number of multiple-step feeding is still needed but these results show that the multiple-step feeding strategy can contribute to a well-balanced SNAD for deammonification when treating high-strength ammonium wastewater with COD in the single-stage deammonification SBR.

• Land and Housing Review
• /
• v.7 no.3
• /
• pp.157-164
• /
• 2016

Recently, the paradigm of land development has been transformed from the joint development to the step-by-step development due to changes in socio-economic conditions. Nevertheless, the introduction of large-scale transportation facilities such as new transportation system tends to employ the joint development. Although new transportation system is eco-friendly, it occasionally fails at the beginning of the project because of high installation cost. Such phenomenon is caused by not only the system did not reflect the local characteristics but also did not respond to the step-by-step development. Accordingly, in order to introduce transportation system rationally, introducing new methods corresponding to the step-by-step development should be sought. In this study, we assumed that large-scaled land development site be achieved step-by-step development. and suggested the need for a phased introduction through benefit-cost analysis. The findings illustrated that the phased introduction shows economic efficiency with 30% increase of B/C compared to the bulk introduction. It also demonstrates that the bulk introduction under step-by-step development is more efficient than the bulk introduction under joint development.

• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.248-262
• /
• 1991

Simulation model was developed to analyze drying process for tray type red pepper dryer and validated by experiments. This model could predict satisfactorily temperatures and moisture contents of red pepper and temperatures of drying air during drying. Optimize algorithm was developed to search control valiables (drying air temperature, air recycle ratio and air flow rate) of red pepper dryer based on a criterion of minimizing energy consumption under the constraint conditions that statisfied carotenoid retension of at least 210mg per 100g dry matter, the moisture content of bottom layer of 15% (d.b) and drying time of less than 35 hours. Step changes in drying air temperature and air recycle ratio were considered in the optimization. In single step in control variables, the difference of the moisture content between top layer and bottom layer was great and more fan power was required. As the drying trays were exchanged when the moisture content of bottom layer reached to 100% (d.b), fifty percent of energy was saved and the difference of moisture content was little. In double step changes in control variables, optimal conditions were found by changing the step when the moisture content of bottom layer reached to 100% (d.b) (about 19.8 hours from starting drying). Optimum air flow rate was $18.1cmm/m^2$. Optimum drying air temperature and air recycle ratio in the first step was $55.8^{\circ}C$ and 0.80, and in the second step $65.6^{\circ}C$ and 0.88, respectively. In triple step changes in control variables, the optimal conditions were found by changing the steps when the moisture content of bottom layer reached to 250% (d.b) and 150% (d.b). Optimal air temperatures were $66.2^{\circ}C$, $58.4^{\circ}C$ and $66.9^{\circ}C$, and optimal air recycle ratios were 0.778, 0.785, 0.862 at each step, respectively. Optimal air flow rate was $18.9cmm/m^2$. The best operating mode was triple step mode considering energy consumption, drying time, fan power, and quality of dried red pepper. When the triple step mode was used to dry the red pepper, the energy consumption was about 16.5%~57.2% less than that of the single step mode and the drying time was 6.6 hours shorter than that of the double step mode.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.4
• /
• pp.267-275
• /
• 2011

This paper proposes a new quickly convergent pattern search quasi-Newton algorithm that employs the multi-step version of the Symmetric Rank One (SRI). The new algorithm works on the factorizations of the inverse Hessian approximations to make available a sequence of convergent positive bases required by the pattern search process. The algorithm, in principle, resembles that developed in [1] with multi-step methods dominating the dervation and with numerical improvements incurred, as shown by the numerical results presented herein.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.413-420
• /
• 2000

This paper is study for database development for integrated structural system of RC buildings based on STEP In order to develope database, CIS/2 product model and INDECON application were used. CIS/2 will be accepted STEP(The STandard for the Exchange of Product model data) AP230 and INDECON(INtelligent structural DEsign system) is a Integrated structural system of RC buildings. The paper focuses on application from CIS/2 to INDECON database.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.115-118
• /
• 2000

We present a new variable step size LMS algorithm using the correlation between reference input and error signal of adaptive filter. The proposed algorithm updates each weight of filter by different step size at same sample time. We applied this algorithm to adaptive multip]e-notch filter. Simulation results are presented to compare the performance of the proposed algorithm with the usual LMS algorithm and another variable step algorithm.

• Proceedings of the CALSEC Conference
• /
• 1997.11a
• /
• pp.443-461
• /
• 1997

ㆍProSTEP, PDES, Inc., and JSTEP announce agreement on PDM Schema ㆍ November 4, 1997 ㆍInteroperable with STEP AP203, AP2l0, AP214, and AP232 ㆍNeutral specification allows for the exchange of the following types - item master data (part identification, approval of part version) - item structure - item classification - item property (mass, costs) - document management (identification, revision… ) - work management (engineering change request, EC order, project) ㆍVendors of PDM systems are asked to join ProSTEP's PDM Round Table and PDES, Inc.'s PDMnet.(omitted)