• 대한토목학회논문집
• /
• 제37권2호
• /
• pp.357-367
• /
• 2017

강지보로 보강된 터널 숏크리트 라이닝은 그 기하학적 형태로 인해 외부하중이 작용됨에 따라 휨 모멘트와 축력이 동시에 발생하게 된다. 숏크리트는 축력 수준에 따라 휨 강성이 달라지며, 이로 인한 심한 비선형 거동을 보인다. 또한 강지보 유형에 따라 역학적으로 상이한 지보 성능을 가진다. 본 연구에서는 화이버 단면 요소(fiber section element)를 이용해 압축력과 휨 모멘트를 동시에 받는 강지보-숏크리트 라이닝의 비선형합성거동을 평가할 수 있는 수치모델을 제시하였고, 이를 활용해 강지보 유형에 따른 합성지보 성능을 수치적으로 분석하였다. 또한, 지반-구조물 상호작용을 구현하기 위해 지반의 연화(softening) 거동을 고려하여 수정된 hyperbolic 모델을 제시하였다. 제시된 수치모델은 기존 아치형 실험체의 하중실험 결과와 해석결과를 비교하여 검증하였으며, 수치해석을 통해 강지보 유형에 따른 라이닝의 합성거동을 분석하였다. 해석결과를 통해, 복철근 형태의 강지보가 기존 H형강과 유사한 극한 하중 지지력을 가지는 것을 확인하였다. 또한 강재량 증가가 잔류 지지력 향상에 크게 기여하였으며, 지보재 주변의 지반강성이 증가함에 따라 강지보 유형에 따른 최대 하중지지력 개선 효과는 작아짐을 확인하였다.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.257-262
• /
• 2019

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

• 한국강구조학회 논문집
• /
• 제19권1호
• /
• pp.29-41
• /
• 2007

다른 복잡한 의사 결정 문제와 같이 구조설계는 많은 다른 기준들 사이의 상반관계에서 이루어지는 의사 결정 문제이다 . 다양하게수학적으로 프로그래밍 된 설계 기법이 점차 현실적인 요소를 감안하여 현실화되고 있으나 여전히 많은 설계의 제한, 즉 수학적으로 모델화 되지 못하는 많은 설계요소들과 관련되어 있다. 본 연구는 이러한 제한을 인식하고 강 프레임 구조물의 최적 설계에 관하여 다루어 지지 않은 설계요소를 감안하여 실무 설계자들에게 하나의 유일한 설계해가 아닌 다른 몇 가지 유용한 설계 대안을 제시할 수 있는 설 계 시스템을 개발 하였다. 본 연구의 알고리즘에 의해 얻어진 설계 대안들은 모델화된 목적함수에 관해 최적의 해는 아니지만 매우 적합한 해들이 며, 동시에 유일한 최적해와 비교 시 다른 설계 해로써 때로는 임의 모델화 되지 않은 설계요소에 관해서는 오히려 더 나은 결과를 나타내 줍 중에 효과적으로 저항하도록 보와 기둥이 모멘트 연결된 강 프레임 구조물을 대상으로 안정성에 문제가 없이 경비절감에 효과적인 설계를 위해 재료비뿐만 아니라 가설 시 부재연결에 소요되는 경비를 포함하는 최소 경비 설계를 위한 의사 결정 지원 시스템을 개 발하고자 한다. 본 시스템은 최적 설계해에 대한 설계대안을 생성하기 위한 변형된 최적화 문제형식으로, 이때 최적 설계해는 하중저항계수설계법 에 따른 비선형 해석과정과 유전알고리즘을 바탕으로 한 최적화 알고리즘을 결합한 알고리즘을 반복 수행하여 얻은 모멘트 연결의 수와 총 경비 와의 상반관계로부터 결정된다. 유용성 평가를 위해 생성된 각 설계대안을 다양한 설계요소에 관해 고찰하였다.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.61-69
• /
• 2016

A numerical simulation of the solid/liquid coexistence temperature range, using solidification segregation model linked with the Kurz-Giovanola-Trivedi model, explained the mechanism of the BTR shrinkage (with an increase in welding speed) in type 310 stainless steel welds by reduction of the solid/liquid coexistence temperature range of the weld metal due to the inhibited solidification segregation of solute elements and promoted dendrite tip supercooling attributed to rapid solidification of laser beam welding. The reason why the BTR enlarged in type 316 series stainless welds could be clarified by the enhanced solidification segregation of impurity elements (S and P), corresponding to the decrement in ${\delta}-ferrite$ crystallization amount at the solidification completion stage in the laser welds. Furthermore, the greater increase in BTR with type 316-B steel was determined to be due to a larger decrease in ${\delta}-ferrite$ amount during welding solidification than with type 316-A steel. This, in turn, greatly increases the segregation of impurities, which is responsible for the greater temperature range of solid/liquid coexistence when using type 316-B steel.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.613-620
• /
• 2005

This research is experimental paper to prepare the structural safety of the upper bridge for support type on tunnel and the effect of settlement. Unit weight test and uni-axial compression test have been performed to simulate the physical property of foundation on the tunnel. Tunnel model of slip form type for centrifuge model has been developed to performed the tunnel excavation while field stress is activated. And the support type of tunnel such as umbrella arch method and large diameter steel pipe reinforce method has been tested for the centrifuge model. After the analysis of experiment, results show that internal displacement of large diameter steel pipe reinforce method is smaller than that of the umbrella arch method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.403-407
• /
• 2005

This paper proposes a looperless tension control algorithm which is robust to disturbance and tensional variation in rolling process using SVR(Support Vector Regression). Hot rolling process which is global technology to coil steel after continuous finishing process for welded bars followed by roughing mill process, becomes hot issue. Finishing mill process not only makes it possible to produce ultra thin steel strip(0.8 mm) but enhance the quality of terminals of coil, which increases the productivity due to faster process. Constant tension control between stands in hot rolling process is essential to enhance the quality of steel. Sensorless tension control is under research by some advanced companies to replace the conventional tension control method because in continuous finishing mill process, it is impossible to install the looper used in conventional control system. Simulation results show the effectiveness of the proposed algorithm.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.331-342
• /
• 2005

This paper presents a non-destructive evaluation (NDE) technique for detecting damages on a jointed steel plate on the basis of the time of flight and wavelet coefficient, obtained from wavelet transforms of Lamb wave signals. Support vector machines (SVMs), which is a tool for pattern classification problems, was applied to the damage estimation. Two kinds of damages were artificially introduced by loosening bolts located in the path of the Lamb waves and those out of the path. The damage cases were used for the establishment of the optimal decision boundaries which divide each damage class's region from the intact class. In this study, the applicability of the SVMs was investigated for the damages in and out of the Lamb wave path. It has been found that the present methods are very efficient in detecting the damages simulated by loose bolts on the jointed steel plate.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.96-99
• /
• 2001

The fatigue life of support bearings is one of the most critical factors for the performance of a control rod driving mechanism. They are operated at high temperature and high pressure and especially lubricated with dramatically low viscosity water. The support bearing is made of standardized 440C stainless steel, and it supports thrust load including the weight of the driving system and external force. Friction and wear characteristics of this material operating under severe lubrication condition is not well known yet, although it is expected to be changed with respect to temperature and boundary pressure. So the friction characteristics are investigated in sliding conditions using the reciprocating tribometer which can simulate the operating conditions. Highly purified water is used as lubricant, and the water is heated up and pressurized. Friction farce on the reciprocating specimens is monitored by the load cells. The results of the experiments are presented in this paper.

• Advances in Computational Design
• /
• 제4권4호
• /
• pp.397-413
• /
• 2019

In this paper, static nonlinear analysis of gable frame is performed using OpenSees software. Both geometric and material nonlinearities are considered in analyses. To consider large displacements, co-rotational coordinate transformation is used in software. The effects of symmetric and asymmetric support conditions including clamped and simple supports are studied. On the other hand, the material nonlinearity is reflected on analyses using Giuffre-Menegotto-Pinto steel material. Note that strain hardening characteristics are also considered in this model. Moreover, I-shaped cross-section is assumed for all members. The results are provided for different geometry properties of gable frame including shallow and deep inclined roof. It should be added that buckling and post-buckling behaviors of gable frame are investigated using related equilibrium paths. A comparison study is also implemented on the responses of buckling loads obtained for different support and geometry conditions. To trace snap-through paths completely, a displacement control method entitled arc-length is utilized. Findings show the capability of proposed model in nonlinear analysis of gable frames.

• 기술혁신학회지
• /
• 제3권2호
• /
• pp.94-110
• /
• 2000

This article prospects the patterns of technological innovation in the steel industry and suggests the directions of technological innovation in Korean steel industry. Technological innovation patterns can be analysed through technological trends, innovation-inducing mechanism, and innovators' relationships. In the technological trends, direct coupling of manufacturing processes, lasting growth of mini-mill, and the importance of technological integration are prospected. In the innovation-inducing mechanism, while production system will be specialized, the development of new steel materials and environment-friendly technological innovation will be accelerated. In the innovators' relationships, steel industry faces more complex competition and new forms of inter-firm cooperation including M&A, joint venture, and joint R&D. In order to cope with such changes in the technological innovation patterns, Korean steel industry need to establish core competence based on technological innovation through a great leap in R&D investment, the production of high value-added products, the development of new generation steel technologies, strategic joint R&D, comprehensive technological cooperation, and government's active support.