• 한국강구조학회 논문집
• /
• 제23권5호
• /
• pp.535-546
• /
• 2011

본 연구에서는 다양한 명시적 호장법을 사용하여 공간프레임의 반강접 탄소성 후좌굴 해석을 수행하였다. 이를 위해 이전 연구를 발전시켜 다양한 명시적 알고리즘의 호장법과 명시적, 묵시적 해석법에 동시에 적용 가능한 반강접 탄소성 공간프레임요소를 제안하였다. 다양한 명시적 호장법은 예측단계와 수렴단계에 명시적 해석법인 동적이완법을 적용한 것을 의미한다. 따라서 명시적 호장법에는 명시적(예측단계)-명시적(예측단계) 호장법, 명시적(예측단계)-묵시적(수렴단계) 호장법, 묵시적(예측단계)-명시적(수렴단계) 호장법으로 구분된다. 또한 명시적 호장법에 적용 가능하도록 수정된 반강접 탄소성 공간프레임요소는 오일러리안 유한변형이론에 의해 강체회전변형을 고려하였기 때문에 대변위가 발생하는 기하학적 비선형 문제에 적용될 수 있고, 완전 탄소성 소성힌지 알고리즘에 의한 재료적 비선형성을 고려하였으며, 부재내부에 정적 응축된 회전 및 축방향 성분의 선형 스프링에 의해 접합부 반강접 특성을 반영하였다. 제안된 해석법을 이용하여 검증예제를 수행함으로써 본 연구에서 제안된 다양한 명시적 호장법 및 공간프레임요소의 정확성을 검증한다.

• 터널과지하공간
• /
• 제20권1호
• /
• pp.58-64
• /
• 2010

지반과 터널라이닝의 상호작용을 고려한 GLI모델은 기존의 Terzaghi 이완하중과 골조모델을 이용한 방법에 비해 터널의 2차라이닝(콘크리트라이닝)에 작용하는 지반하중을 합리적으로 경감할 수 있음이 입증된 바 있다. 이에 본 연구에서는 기존의 골조모델을 이용하여 설계된 OO선O공구의 콘크리트라이닝에 대해 GLI모델을 도입한 현장설계를 통해 경제성 및 시공성을 개선하였다. 다양한 안전측 고려사항에도 불구하고 철근량의 약 50%가 감소하여 철근자재비를 감소시킬 수 있었고 적정한 철근간격을 확보하여 콘크리트 밀실충전이 용이하였다. 지반조건이 불량한 터널일 수록 더 큰 철근량 절감효과가 있었으며, 이는 Terzaghi 이완하중이 불량한 지반에서 과도하게 산정되기 때문이다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.7-7
• /
• 2002

Recently social demand to achieve low fuel consumption and clean emission requires the development of new generation vehicle beyond the conventional vehicle concept. In this point, new generation vehicle is newly designed as electric vehicle, hybrid electric vehicle, fuel cell electric vehicle or 3 liter car etc. In order to develop new generation vehicle, it is very important to develop new materials and process technologies now. In this paper these new technologies are presented focusing on weight reduction specially. Steel body can be achieved 20-25% weight reduction by adoption of high strength steel and new process technologies, i.e tailored blank and hydroforming. Aluminium body can be achieved 40-50% weigt down by use of all aluminium monocoque body or aluminium space frame with aluminium panel. Plasitic composite body can be achieved 30% weight reduction comparing with conventional steel body.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.45-52
• /
• 2003

A finite element procedure to estimate ultimate strength of space frames considering spread of plasticity is presented. The improved displacement field is introduced based on inclusion of second order terms of finite rotations. All the nonlinear terms due to bending and torsional moment as well as axial force are precisely considered. The concept of plastic hinge is introduced and the incremental load/displacement method is applied for the elasto-plastic analysis. The initial yield surface is defined based on the residual stress and the full plastification surface is considered under the combined action of axial force, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for ultimate strength of space frames are compared with available solutions and experimental results.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.683-694
• /
• 2004

본 논문에서는 접합부의 비선형을 고려한 공간 강뼈대 구조물의 고등해석과 최적설계를 수행하였다. 고등해석은 접합부의 비선형, 기하학적 비선형 및 재료적 비선형을 고려한다. 접합부의 비선형은 Kishi와 Chen이 제안한 3가지 매개변수를 가지는 파워모델을 사용하여 고려하였다. 기하학적 비선형은 안정함수를 사용하여 고려하였으며, 재료적 비선형은 CRC 접선 탄성계수와 포물선 함수를 사용함으로서 고려하였다. 최적화 기법으로는 Choi와 Kim이 제안한 직접탐색법을 사용하였다. 직접탐색법은 LRFD의 상관방정식으로 계산된 값중에서 최대값을 가지는 부재의 크기를 단계별로 증가시키는 방법이다. 목적함수는 구조물의 중량을 사용하였으며, 제약조건식은 구조시스템의 하중-저항능력, 처짐, 층간 수평변위 및 연성요구 조건을 고려하였다. 제안된 방법에 의한 설계결과를 LRFD방법과 비교하였다.

• 한국강구조학회 논문집
• /
• 제15권3호
• /
• pp.299-311
• /
• 2003

점진적 소성화를 고려한 공간뼈대구조의 극한강도를 평가하기 위한 비선형 유한요소 해석법을 제시한다. 유한한 회전각의 2차항 까지 고려된 개선된 변위장을 도입하여 결과적으로 축력뿐만 아니라 휨모멘트 그리고 비틂모멘트에 의한 비선형 효과를 모두 고려한다. 탄-소성 해석을 위하여 소성힌지 개념을 도입하고 비선형 해석방법으로 하중 및 변위증분법을 이용한다. 잔류응력 분포에 의거한 초기항복함수를 정의하고 축력뿐만 아니라 모멘트의 함수로 표현되는 소성영역함수를 사용하여 flow rule과 normality condition을 적용하여 탄-소성 강도매트릭스를 도출한다. 계산시간이 빠른 기존의 소성힌지 해석기법을 사용하는 동시에 소성영역의 진전효과를 효율적으로 나타내었다. 요소의 소성화 진행정도를 나타내는 파라미터를 도입하고 여러 가지 강도감소모델을 사용하여 극한해석을 수행하여 그 결과를 소성영역해석, 쉘요소를 이용한 정밀해석 그리고 실험결과와 비교하였다.

• Architectural research
• /
• 제25권1호
• /
• pp.1-9
• /
• 2023

Structural ageing influences the structural performance in a negative way by reducing the seismic resilience of the structure which makes it a major concern around the world. Retrofitting is considered to be a pragmatic and feasible solution to address this issue. Numerous retrofitting techniques are devised by researchers over the years. The viability of using steel bracings as retrofitting component is evaluated on a G+30 storied building model designed according to ACI318-14 and ASCE 7-16. Four different types of steel bracing arrangements (V, Inverted V/ Chevron, Cross/ X, Diagonal) are assessed in the model developed in commercial nu-merical analysis software while considering both material and geometric nonlinearities. Reducing displacement and cost in the structures indicates that the design is safe and economical. Therefore, the purpose of this article is to find the best bracing system that causes minimum displacement, which indicates maximum lateral stiffness. To evaluate the seismic vulnerability of each system, incremental dynamic analysis was conducted to develop fragility curves, followed by the formation of collapse margin ratio (CMR) as stipulated in FEMA P695 and finally, a cost estimation was made for each system. The outcomes revealed that the effects of ge-ometric nonlinearity tend to evoke hazardous consequences if not considered in the structural design. Probabilistic seismic and economic probes indicated the superior performance of V braced frame system and its competency to be a germane technique for retrofitting.

• 건축역사연구
• /
• 제9권3호
• /
• pp.51-69
• /
• 2000

This study tries to analyze the development of architectural technologies appeared in several tall buildings and large spatial structures from 1955 to 1999 in Korea. We suppose that these buildings represent the development of technology in Korean modern architecture. By the detailed analysis of these buildings, we can arrive at a conclusion as such; During the years 1955-1999, there existed a great changement in the eighties. We can find this fact very well in the domain of structural system and curtain wall system. In large spatial structures, the structural-system of shell and steel truss dome was replaced by that of space frame, space truss and cable truss with membrane. In tall building, the structural system of rigid frame and shear wall was replaced by tubular system, core and outrigger system. Korean architects introduced the aluminum curtain wall in the sixties, but its low technological level caused many problems in reality. Therefore, precast concrete curtain wall appeared from seventies as the main method for an outer wall in tall building. With the augmentation of height after 1980, PC curtain wall was replaced by the aluminum curtain wall of unit type and structural glass wall system. These systems help to stress the transparency in a tall building.

• Smart Structures and Systems
• /
• 제15권1호
• /
• pp.99-117
• /
• 2015

The Stonecutters Bridge (SCB) in Hong Kong is the third-longest cable-stayed bridge in the world with a main span stretching 1,018 m between two 298 m high single-leg tapering composite towers. A Wind and Structural Health Monitoring System (WASHMS) is being implemented on SCB by the Highways Department of The Hong Kong SAR Government, and the SCB-WASHMS is composed of more than 1,300 sensors in 15 types. In order to establish a linkage between structural health monitoring and maintenance management, a Structural Health Rating System (SHRS) with relevant rating tools and indices is devised. On the basis of a 3D space frame finite element model (FEM) of SCB and model updating, this paper presents the development of an SHR-oriented 3D multi-scale FEM for the purpose of load-resistance analysis and damage evaluation in structural element level, including modeling, refinement and validation of the multi-scale FEM. The refined 3D structural segments at deck and towers are established in critical segment positions corresponding to maximum cable forces. The components in the critical segment region are modeled as a full 3D FEM and fitted into the 3D space frame FEM. The boundary conditions between beam and shell elements are performed conforming to equivalent stiffness, effective mass and compatibility of deformation. The 3D multi-scale FEM is verified by the in-situ measured dynamic characteristics and static response. A good agreement between the FEM and measurement results indicates that the 3D multi-scale FEM is precise and efficient for WASHMS and SHRS of SCB. In addition, stress distribution and concentration of the critical segments in the 3D multi-scale FEM under temperature loads, static wind loads and equivalent seismic loads are investigated. Stress concentration elements under equivalent seismic loads exist in the anchor zone in steel/concrete beam and the anchor plate edge in steel anchor box of the towers.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.93-107
• /
• 2016

Seismic fragility analysis is a probabilistic decision-making framework which is widely implemented for evaluating vulnerability of a building under earthquake loading. It requires ingredient named probabilistic model and commonly developed using statistics requiring collecting data in large quantities. Preparation of such a data-base is often costly and time-consuming. Therefore, in this paper, by developing generic seismic drift demand model for regular-multi-story steel moment resisting frames is tried to present a novel application of the probabilistic decision-making analysis to practical purposes. To this end, a demand model which is a linear function of intensity measure in logarithmic space is developed to predict overall maximum inter-story drift. Next, the model is coupled with a set of regression-based equations which are capable of directly estimating unknown statistical characteristics of the model parameters.To explicitly address uncertainties arise from randomness and lack of knowledge, the Bayesian regression inference is employed, when these relations are developed. The developed demand model is then employed in a Seismic Fragility Analysis (SFA) for two designed building. The accuracy of the results is also assessed by comparison with the results directly obtained from Incremental Dynamic analysis.