Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

Ultimate Strength Analysis of Space Steel Frames Considering Spread of Plasticity

점진적 소성화를 고려한 공간 강뼈대구조의 극한강도해석

  • Received : 2003.01.22
  • Accepted : 2003.06.07
  • Published : 2003.06.27
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a finite element procedure to estimate the ultimate strength of space frames considering spread of plasticity. The improved displacement field is introduced based on the inclusion of second-order terms of finite rotations. All the non-linear terms due to bending moment, torsional moment, and axial force are precisely considered. The concept of plastic hinges is introduced and the incremental load/displacement method is applied for elasto-plastic analyses. The initial yield surface is defined based on the residual stress, and the full plastification surface is considered under the combined action of axial forces, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for the ultimate strength of space frames are compared with available solutions and experimental results.

점진적 소성화를 고려한 공간뼈대구조의 극한강도를 평가하기 위한 비선형 유한요소 해석법을 제시한다. 유한한 회전각의 2차항 까지 고려된 개선된 변위장을 도입하여 결과적으로 축력뿐만 아니라 휨모멘트 그리고 비틂모멘트에 의한 비선형 효과를 모두 고려한다. 탄-소성 해석을 위하여 소성힌지 개념을 도입하고 비선형 해석방법으로 하중 및 변위증분법을 이용한다. 잔류응력 분포에 의거한 초기항복함수를 정의하고 축력뿐만 아니라 모멘트의 함수로 표현되는 소성영역함수를 사용하여 flow rule과 normality condition을 적용하여 탄-소성 강도매트릭스를 도출한다. 계산시간이 빠른 기존의 소성힌지 해석기법을 사용하는 동시에 소성영역의 진전효과를 효율적으로 나타내었다. 요소의 소성화 진행정도를 나타내는 파라미터를 도입하고 여러 가지 강도감소모델을 사용하여 극한해석을 수행하여 그 결과를 소성영역해석, 쉘요소를 이용한 정밀해석 그리고 실험결과와 비교하였다.

Keywords

Acknowledgement

Supported by : 한국학술진흥재단

References

  1. 대한토목학회 논문집 v.10 no.2 보존력 및 비보존력을 받는 구조물의 기하적 비선형 유한요소해석을 위한 하중 및 변위증분 알고리즘의 개발 김문영;장승필
  2. 대한토목학회논문집 v.22 no.2-A 비대칭 단면을 갖는 박벽 공간뼈대구조의 후좌굴해석을 위한 개선이론 김성보;김문영;장승필
  3. User's Manual Vol. Ⅰ and Vol.Ⅱ Ver. 5.4. ABAQUS
  4. Ph. D. Thesis, Cornell University Inelastic Torsional-flexural Behavior and the Three-dimensional Analysis of Steel Frames Attalla, M.R.
  5. J. Struct. Eng. ASCE v.120 no.8 Spread of plasticity:Quasi-plastichinge approach Attalla, M.R.;Deierlein, G.G.;McGuire, W. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2451)
  6. Comp. Meth. Appl. Mech. Eng. v.35 Finite Element Analysis of Two-and Three-Dimensional Elasto-Plastic Frames-The Natural Approach Aygyris, J.H.;Boni, B.;Hincleniang, W.;Kleiber, M. https://doi.org/10.1016/0045-7825(82)90135-9
  7. Comp. Meth. Appl. Mech. Eng. v.14 On large displacement-small strain analysis of structures with rotational degrees of freedom Argyris, J.H.;Dunne. P.C.;Scharpf, D.W.
  8. Int. J. Numer. Methods Engineering v.14 Incremental displacement algorithms for nonlinear problems Batoz, J.L.;Dhatt, G. https://doi.org/10.1002/nme.1620140811
  9. Journal of Eng. Mechanics v.122 Stability of shear deformable thin-walled space frames and circular arches Chang, S.P.;Kim, S.B.;Kim, M.Y. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:9(844)
  10. J. Struct. Eng. ASCE v.117 no.8 Thin-walled space frames. Ⅰ.: large-deformation analysis theory Chen, H.;Blandford, G.E. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:8(2499)
  11. Theory of beam-columns v.2 Chen, W.F.;Atuta, T.
  12. Engineering and structures v.12 A yield surface equation for doubly symmetrical sections Duan, L.;Chen, W. F. https://doi.org/10.1016/0141-0296(90)90016-L
  13. Proceedings of the Institution of civil engineers: Structure and Buildings Adaptive Space Frame Analysis Part Ⅰ: a Plastic Hinge Approach Izzuddin, B.A.;Elnashai, A.S.
  14. J. Struct. Engrg. ASCE v.109 no.8 Large Deformation Analysis of Elastic-Plastic Frames Kassimali, A. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:8(1869)
  15. Engineering Structures v.22 Improved formulation for spatial stability and free vibration of thin-walled tapered beams and space frames Kim, S.B.;Kim, M.Y. https://doi.org/10.1016/S0141-0296(98)00140-0
  16. Engineering Structure v.24 Second-order Distributed Plasticity Analysis of Space Steel Frames Kim, S.E.;Lee, D.H. https://doi.org/10.1016/S0141-0296(01)00136-5
  17. Ph. D. Thesis. Purdue Univeristy Three-dimensional Second-order Inelatsic Analysis of Steel Frames Nukala, P.K.
  18. Journal of Structural Engineering, ASCE v.99 Tangent stiffness in space frames Oran, C.
  19. Comp. Meth. Appl. Mech. Eng. v.33 Yield surface applications in nonlinear steel frame analysis Orbison, J.G.;Mcguire, W.;Abel, J.F. https://doi.org/10.1016/0045-7825(82)90122-0
  20. Int. J. Numer. Methods Engineering v.26 Elasto-plastic large deformation analysis of space-frames; a plastic-hinge and stress-based explicit derivation of tangent stiffness Shi, G.;Atluri, S. N. https://doi.org/10.1002/nme.1620260306
  21. Stahlbau v.54 no.10 Calibrating frames Vogel, U.
  22. Technical report, SSRC Plastic hinge based methods for advanced analysis and design of steel frames White, D.;Chen, W.
  23. J. Struct. Engrg. ASCE v.112 no.4 Stiffness matrix for geometric nonlinear analysis Yang, Y.B.;McGuire, W. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:4(853)