• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.51-55
• /
• 2003

본 연구는 조사대상지역인 전라남도 해남군 전역에 대해 현장조사된 지질 및 지하수 양수량 자료등과 같은 수리정보를 종합적으로 분석하고 이를 Landsat 영상자료과의 영상융합 과정을 통해 지하수 부존가능성에 대한 수리 지질 지표정보로 추출함으로서 지하수 특성정보를 위성영상정보와 연계하여 효과적으로 도시하고자 하였다. 현장조사시 획득된 자료는 해남지역을 11개 소유역으로 구분한 후 각 구역에 대한 2000여개 관점에서 측정된 양수량과 안정지하수위를 이용하여 산출한 비용출량 자료(groundwater specific capacity)와 각 소 유역 (unit watershed)에 대한 선구조 분석자료, 지질별 분포, 정밀고도자료를 추출하여 산출한 고도, 경사도 분포, 수계패턴과 수계밀도로서 이를 통합적으로 분석하여 해남지역에 대한 지하수 특성을 파악하고자 하였다. 위성영상자료의 처리과정은 Landsat 5 TM 영상자료는 '86. 12. 11 및 '98. 12. 28에 촬영된 WRS(World Reference System) Row-Path116-36로서, 1986년 영상은 12년 차이의 해남의 변화지역을 탐지하기 위한 영상자료로서 활용하였으며 98년 영상을 주요 분석 자료로 이용하였으며 지표 이용정보 추출은 크게 수역추출, 식생분포추출, 지표분류도, 변화탐지영역추출로 구분된다. 본 연구방법은 크게 위성영상분석을 통해 추출된 정보와 지표조사를 통해 획득된 선구조 및 지하수 정보를 Data fusion 방식으로 이용되고 있는 IHS 변환 기법을 통해 본 역에 대한 지하수 정보 및 간척지 등에 의한 지표 개발에 따른 지하수 부존 가능성을 탐색하기 위한 현황을 효과적인 자료로 표현하고자 하였다.및 스페클 잡영 제거 정도에 있어 다른 필터들과 큰 차이가 없지만 경계선보존지수는 다른 필터들에 비하여 가장 우수함을 확인할 수 있었다.rbon 탐식효율을 조사한 결과 B, D 및 E 분획에서 유의적인 효과를 나타내었다. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On th

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.240-245
• /
• 2013

Electrochemical surface treatment is commonly used to form a thin, rough, and porous oxidation layer on the surface of titanium. The purpose of this study was to investigate the formation of nanotubular titanium oxide arrays during short anodization processing. The specimen used in this study was 99.9% pure cp-Ti (ASTM Grade II) in the form of a disc with diameter of 15 mm and a thickness of 1 mm. A DC power supplier was used with the anodizing apparatus, and the titanium specimen and the platinum plate ($3mm{\times}4mm{\times}0.1mm$) were connected to an anode and cathode, respectively. The progressive formation of $TiO_2$ nanotubes was observed with FE-SEM (Field Emission Scanning Electron Microscopy). Highly ordered $TiO_2$ nanotubes were formed at a potential of 20 V in a solution of 1M $H_3PO_4$ + 1.5 wt.% HF for 10 minutes, corresponding with steady state processing. The diameters and the closed ends of $TiO_2$ nanotubes measured at a value of 50 cumulative percent were 100 nm and 120 nm, respectively. The $TiO_2$ nanotubes had lengths of 500 nm. As the anodization processing reached 10 minutes, the frequency distribution for the diameters and the closed ends of the $TiO_2$ nanotubes was gradually reduced. Short anodization processing for $TiO_2$ nanotubes of within 10 minutes was established.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.528-535
• /
• 2020

Recently, the protection coordination method of DC systems has been presented because renewable energy and distributed resources are being installed and operated in distribution systems. On the other hand, it is difficult to detect ground faults because there is no significant difference compared to a steady-state current in ungrounded IT systems, such as DC load networks and urban railways. Therefore, this paper formulates the detection principle of IMD (Insulation Monitoring Device) to use it as a protection coordination device in a DC system. Based on the signal injection method of IMD, which is analyzed by a wavelet transform, this paper presents an algorithm of detecting ground faults in a DC system in a fast and accurate manner. In addition, this paper modeled an IMD and an ungrounded DC system using the PSCAD/EMTDC S/W and performed numerical analysis of a wavelet transform with the Matlab S/W. The simulation results of a ground fault case in an ungrounded DC system showed that the proposed algorithm and modeling are useful and practical tools for detecting a ground fault in a DC system.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.164-168
• /
• 2014

BACKGROUND: Increase in application of liquid pig manure(LPM) in agriculture as nutritional source has become a social issue due to its influence on water quality. Also, proper application methods have not been developed with respect to indigenous properties of LPM and soil physical properties. Therefore, we conducted this experiment to observe the infiltration characteristics and distribution of dissolved organic compounds of LPM in soils having different soil textures. METHODS AND RESULTS: To do this experiment, we collected three different soils and LPM. We analyzed the physical and chemical properties of both soils and LPM to determine the dilution ratios of LPM. The LPM diluted to 4 different ratios with distilled water was applied to the top of soil column. Infiltration rates were observed by time and depth until the amount of effluent collected from the bottom of the soil columns were stabilized while maintaining the hydraulic head 3 cm above the soil column. The results showed that infiltration rates increased with increasing dilution ratios in the order of sandy, loamy sand, and sandy loam. The time required to reach steady state was increased with decreasing sand contents clay. CONCLUSION: The size and amount of the dissolved organic compounds in LPM that can determine the efficiency as fertilizer and environmental problems as nonpoint pollution source in water quality have not been investigated with respect to behavior and transport of them in soil. Therefore, it requires further research how we can properly apply LPM as valuable fertilizer substitute for inorganic fertilizers.

• Journal of Veterinary Clinics
• /
• v.23 no.2
• /
• pp.87-90
• /
• 2006

The aim of the present study was to investigate the disposition pharmacokinetics of roxithromycin in broilers. Roxithromycin was administered at a single dose of 20 mg/kg body weight by intravenous (i.v.) routes. Plasma concentrations of roxithromycin were determined by liquid chromatography/mass spectrometry. After a single i.v. dose plasma concentrations were best fitted to a two-compartment open model. The values of the pharmacokinetic parameters after i.v. administration were: elimination half-life = $5.83{\pm}1.79h$, mean residence time = $6.33{\pm}0.32h$, total body clearance = $0.55{\pm}0.15L/h/kg$, and volume of distribution at steady state = $3.47{\pm}0.84L/kg$. The pharmacokinetic interpretation of roxithromycin after i.v. administration revealed that the drug was well distributed throughout the body in broilers and slowly eliminated. More studies for the application of roxithromycin against poultry disease are needed to establish a suitable pharmaceutical formulation, propose optimum dosage regimens, investigate clinical efficacy and study the tolerability of repeated doses.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.2
• /
• pp.101-107
• /
• 2010

A rapid and sensitive reversed-phase high performance liquid chromatography (HPLC) method was developed for the determination of N-(-4-Chlorophenyl)-6-hydroxy-7-methoxy-2-chromanecarboxamide (KAL-1120), a novel anti-inflammation agent, in the rat plasma. The method was applied to analyze the compound in the biological fluids such as bile, urine and tissue homogenates. After liquid-liquid extraction, the compound was analyzed on an HPLC system with ultraviolet detection at 275 nm. HPLC was carried out using reversed-phase isocratic elution with a $C_{18}$ column, a mobile phase of a mixture of acetonitril (40 v/v%) at a flow rate of 1.0 mL/min. The chromatograms showed good resolution and sensitivity and no interference of plasma. The calibration curve for the drug in plasma was linear over the concentration range of 0.05-50 ${\mu}g$/mL. The intra- and inter-day assay accuracies of this method ranged from 0.06% to 9.33% of normal values and the precision did not exceed 6.28% of relative standard deviation. The plasma concentration of KAL-1120 decreased to below the quantifiable limit at 1.5 hr after the i.v. bolus administration of 2-10 mg/kg to rats ($t_{1/2,({\alpha})}$ and $t_{1/2,({\beta})$ of 2.15 and 26.7 min at a dose of 2 mg/kg, 3.91 and 33.0 min at a dose of 10 mg/kg, respectively). The steady-state volume of distribution ($V_{dss}$) and the total body clearance ($CL_t$) were not significantly altered in rats given doses from 2 to 10 mg/kg. Of the various tissues tested, KAL-1120 was mainly distributed in the lung and heart after i.v. bolus administration. KAL-1120 was detected in the bile by 30 min after its i.v. bolus administration. However, the concentration in the urine after i.v. bolus administration became too low to measure, suggesting that KAL-1120 is mostly excreted in the bile. In conclusion, this analytical method was suitable for the preclinical pharmacokinetic studies of KAL-1120 in rats.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2009

Although thin PCBs(Printed Circuit Boards) have recently been required for high density interconnection, high electrical performance, and low manufacturing cost, the utilization of thin PCBs is severely limited by warpage and reliability issues. Warpage of the thin PCB leads to failure in solder-joints and chip. The $B^2it$(Buried Bump Interconnection Technology) for PCB has been developed to achieve a competitive manufacturing price. In this study, chip temperature, package warpage, chip stress and solder-joints stress characteristics of the PCB prepared with $B^2it$ process have been calculated using thermo-mechanical coupled analysis by the FEM(Finite Element Method). FEM computation was carried out with the variations in bump shapes and kinds of materials under 1.5W power of chip and constant convection heat transfer. The results show that chip temperature distribution reached more quickly steady-state status with PCB prepared with $B^2it$ process than PCB prepared with conventional via interconnection structure. Although $B^2it$ structures are effective on low package warpage and chip stress, with high strength bump materials arc disadvantage for low stress of solder-joints. Therefore, it is recommended that optimized bump shapes and materials in PCB design should be considered in terms of reliability characteristics in the packaging level.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.285-291
• /
• 2015

Exposure to cold sea water can be life-threatening to the drowned individual. Although appropriate life jacket can be usually be provided for the buoyance at the drowning accident, heat loss can make the drowned individual experience the hypothermia. Inflatable life jackets filled with inflatable air pocket can increase the thermal protection as well as the buoyancy force. Because it is important to know how the human body behaves unde the different life jacket, present study compares the thermal insulation capacity of solid type life jacket with that of inflatable life jacket. In order to represent the insulation capacity of life jacket, thermal resistance is estimated based on the assumption of steady-state. Also, a transient three-dimensional thermal distribution of the thigh is analyzed by using finite element method implementing the Pennes bioheat equation. The finite element model is a segmental, multi-layered representation of the body section which considers the heat conduction within tissue, bone, fat and local blood flow rate.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.30-36
• /
• 2001

Schisandra nigra Max. has been cultivated far a medical use as well as food. It is an endemic species which has a unique habitat at the altitude of 600-1,400 m in Cheju island. In this study, three natural populations of S. nigra were investigated by using of starch-gel electrophoresis to determine the extent and distribution of genetic diversity. Except 2 monomorphic locus (Mdh-2 and Pgi-1), 4 of the 6 isozyme locus (Idh, Mdh-2, Mnr, and Pgi-2), verified from 4 isozymes, revealed polymorphism in the three populations of S. nigra. The mean number of allele per locus was 1.7 and the percentages of polymorphism loci were 38.9% at 95% level and 50% at 99% level respectively. The observed and estimated heterozygosities were 0.141 and 0.147 respectively. Although plants which were in the face of crisis and distributed in the restricted area, have been known to the very low degree of genetic variation, S. nigra showed higher genetic variation than others. Genetic variation was mostly allocated within population and individuals than that among populations. The result of Wright's F analysis estimates of $F_{IT}$ and $F_{IT}$ showed that S. nigra population revealed Hardy-Weinberg steady state.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.644-648
• /
• 2019

This study examined effects of the wall thermal conductivity coefficients on the thermal fluid phenomenon of a compartment fire. The reduced scale compartment was 0.4 m in width, 0.6 m in length and 0.6 m in height with a fire-board, which has a thermal conductivity coefficient of $0.18W/m{\cdot}K$. The local temperature at a 0.37 m height and the overall heat release rate were measured under the following experiment conditions: a $0.12m^2$ opening area and $0.01m^2$ pool size of a gasoline fire. The numerical results obtained by the Fire Dynamic Simulation were compared with the experimentally measured temperature. The deviations were within 10 % in the period of the steady state for maximum heat release rate (4.8 kW). The numerical results show that the average temperature of the compartment wall decreases by approximately 71 % with increasing thermal conductivity coefficient from $0.1W/m{\cdot}K$ to $100.0W/m{\cdot}K$ on the fixed heat release rate.