• Geomechanics and Engineering
• /
• v.39 no.1
• /
• pp.105-113
• /
• 2024

Recently, electrical resistivity surveys have been used to obtain information related to underground structures including burial structure type and depth. However, various field conditions hinder understanding measured electrical resistance, and thus there is a need to understand how various geometries affect electrical resistance. This study explores the effect of geometric parameters of a structure and electrodes on electrical resistance in the framework of the finite element method. First, an electrical resistance module is developed using the generalized mesh modeling technique, and the accuracy of the module is verified by comparing the results with the analytical solution for a cylindrical electrode with conical tip. Then, 387 cases of numerical analysis including geometric parameters of a buried structure and electrodes are conducted to quantitatively estimate the detection depth under a steady-state current condition. The results show that electrical resistance is increased as (1) shallower burial depth of structure, (2) closer distance between ground electrode and structure, (3) longer horizontal electrode distance. In addition, the maximum detection depth corresponding to converged electrical resistance is deeper as (4) closer distance between ground electrode and structure, (5) shorter horizontal electrode distance. The distribution of the electric potential around the electrodes and underground structure is analyzed to provide a better understanding of the measured electrical resistance. As engineering purpose, the empirical equation is proposed to calculate maximum detection depth as first approximation.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.47-54
• /
• 2011

This paper presents exploratory research on consumer awareness and attitudesabout organic food, for which consumer demand continues to increase the paper also assesses consumers' organic food distribution channel preferences. By conducting a literature review, a case study has been carried out in order to glean customer behavior, market condition and typesof distribution channels, and development of specialty stores for organic foods. The early research indicates that consumer awareness and customer attitudes toward organic food are mostly positive however, organic food's high price, as well as a lack of organic food stores, cause a negative effect on consumers' purchase intention. Secondly, the U.S. organic food retail channel consists of such mainstream supermarket/grocery stores and leading natural and organic food supermarket chains as Whole Foods, Trader Joe's, and Sunflower Farmers Market. For the current retail distribution of organic food in Korea, off-line stores are composed of direct management stores and franchise chains. Most of the organic food retail distribution operates through the Internet shopping mall, and are commonly located at retail distribution centers as multi-channel, shop-in-shop stores. Moreover, unlike in the U.S., association and consumers' cooperatives (Co-Ops), and such other member-direct retail stores as Hansallim, iCOOP, Nature Dream,and online shopping malls, are all active in Korea. Thirdly, as a result of an analysis of the present state of the organic food retail channel, as well as building a case for organic food specialty stores, the distinctive featuresand rapid growth of such unique organic food stores as Whole Foods Market, or Trader Joe's successful downsizing strategies, as well as Sunflower Farmers Market low-price approach, show steady industry growth. Moreover, as a result of a case studyof such domestic representative organic food specialty stores as "Olga" and "Chorokmaeul," a similar management style to the United States' "Whole Foods Market" and "Trader Joe's," respectively, can be seen. Similar to the U.S. market, Korean organic food markets should also implement active retail distribution opportunities, allowing consumers to select from various diverse and differentiated choices. In order to accomplish this goal, it is necessary to prepare such measures as sustaining reasonable prices, securing various suppliers for unique products,and improving consumer trust through advertisement strategies that are suitable for each company's branding processes.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.6
• /
• pp.613-624
• /
• 1997

Dorsal root ganglion (DRG) is composed of neuronal cell bodies of primary afferents with diverse functions. Various types of ion channels present on DRG neurons may reflect those functions. In the present study, voltage-gated potassium currents in DRG neurons of neonatal rats were characterized by whole-cell voltage clamp method. Two types of delayed rectifier and three types of transient potassium currents were identified according to their electrophysiological properties. The delayed rectifier currents were named $I_{Ke}$ (early inactivating) and $I_{K1}$ (late inactivating). Steady state inactivation of $I_{Ke}$ began from -100 mV lasting until -20 mV. $I_{K1}$ could be distinguished from $I_{Ke}$ by its inactivation voltage range, from -70 mV to +10 mV. Three transient currents were named $I_{Af}$ (fast inactivation), $I_{Ai}$ (intermediate inactivation kinetics), and $I_{As}$ (slow inactivation). $I_{Af}$ showed fast inactivation with time constant of $10.6{\pm}2.0$ msec, $I_{Ai}$ of $36.9{\pm}13.9$ msec, and $I_{As}$ of $60.6{\pm}2.9$ msec at +30 mV, respectively. They also had distinct steady state inactivation range of each. Each cell expressed diverse combination of potassium currents. The cells most frequently observed were those which expressed both $I_{K1}$ and $I_{Af}$, and they had large diameters. The cells expressing $I_{Ke}$ and expressing $I_{Ke}$, $I_{Ai}$, and $I_{As}$ usually had small diameters. Judging from cell diameter, capsaicin sensitivity or action potential duration, candidates for nociceptor were the cells expressing $I_{Ke}$, expressing $I_{Ke}$ and $I_{Ai}$, and expressing $I_{Ke}$ and $I_{As}$. The types and distribution of potassium currents in neonatal rat DRG were similar to those of adult rat DRG (Gold et al, 1996b).

• Fire Science and Engineering
• /
• v.28 no.1
• /
• pp.44-51
• /
• 2014

Smoke from fire is a mixture of combustion gases and particles which include micro-droplets formed from condensed organic vapors and carbonaceous agglomerates. The inhalation of smoke particles causes adverse health effects, and it is prerequisite for the hazard and risk analysis of the smoke particles to know how they behaviour in the respiratory tract. The characteristics of the absorption and adsorption of toxic gases and the amount and location of the particle deposition within the respiratory tract that determine the adverse health effects are related to the morphology and the size distribution of smoke particles. In the present work, as a preliminary study for the adverse health effects of smoke particles, the morphologies of the smoke particles from combustible materials were investigated for each fire stage: smouldering, well-ventilated flaming, small under-ventilated flaming, fully-developed under-ventilated fire. The steady-state tube furnace method given in ISO/TS 19700 was used for the generation of smoke particles. The fire stages were controlled by changing furnace temperature and equivalent ratio. The morphologies were analyzed by using Transmission Electron Microscope (Bio-TEM) by collecting the particles on TEM grids put on each stage of a cascade impactor.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.145-153
• /
• 1991

A numerical simulation of the nonsteady state rolling process in the plane strain condition is presented in the basis of the rigid-plastic finite element method by considering large deformation. In order to apply the large deformation theory to the numerical method for sheet rolling problems, constitutive equation relating 2nd-Piola Kirchhoff stress and Lagrangian strain which reflect geometrical nonlinearity is used. To confirm the validity of the developed algorithm, the analysis of the neutral flow region, roll separating force, torque, pressure and stress/strain distributions on the workpiece is conducted from the bite of the material until the steady state is reached. The computed results of the roll force and torque in the present finite element analysis are lower than those corresponding to small strain theory. The pressure distribution at the work piece-roll interface is found to show the typical 'friction hill' type only. The peak value in near the neutral region, however, is good agrements with the existing results. the neutral region, however, is good agrements with the existing results. The frictional force at the roll interface provide detailed information about the neutral point where the shear forces change direction. In addition, the analysis also includes the effect and influence of material condition, strip thickness, work roll diameter, as well as roll speed and lubricant on each deformation process.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.589-599
• /
• 2016

Implemented since 2004, TPLC (Total Pollution Load Control) is the most powerful water-quality protection program. Recently, uncertainty of prediction using steady state model increased due to changing water environments, and necessity of a dynamic state model, especially the watershed model, gained importance. For application of watershed model on TPLC, it needs to be feasible to adjust the relationship (mass-balance) between discharged loads estimated by technical guidance, and arrived loads based on observed data at the watershed outlet. However, at HSPF, simulation is performed as a semi-distributed model (lumped model) in a sub-basin. Therefore, if the estimated discharged loads from individual pollution source is directly entered as the point source data into the RCHRES module (without delivery ratio), the pollutant load is not reduced properly until it reaches the outlet of the sub-basin. The hypothetic RCHRES generated using the HSPF BMP Reach Toolkit was applied to solve this problem (although this is not the original application of Reach Toolkit). It was observed that the impact of discharged load according to spatial distribution of pollution sources in a sub-basin, could be expressed by multi-segmentation of the hypothetical RCHRES. Thus, the discharged pollutant load could be adjusted easily by modification of the infiltration rate or characteristics of flow control devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.644-647
• /
• 2001

The investigations were discussed on the radiation effects of the electrical properties to the p-type MOS capacitors, which were irradiated by cobalt-60 gamma ray sources. The characteristics of capacitance-bias voltage(C-V) and of dielectric dissipation tarter-bias voltage(D-V) on the capacitors were measured at 1 [MHz] frequency. The microscopic behaviors of spate charges in oxide and silicon-silicon dioxide(Si- $SiO_2$) interface were investigated from the experimental data. The C-V characteristics are statical and convenient for the evaluation of the steady state behavior of carriers and interface states characteristics. While, the distribution and magnitude of space charges in oxide can be found out accurately on the $V_{dp}$ in D-V curves. The density of interface states can be deduced with ease from the magnitude of D-peak at depletion state. Thus, it is also concluded that the D-V curves are more useful and easier than conventional C-V curves for analysis of the microscopic and dynamic behavior of carriers in oxide and Si- $SiO_2$interface.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2327-2335
• /
• 2018

Fluid catalytic cracking (FCC) is an important chemical process that is widely used to produce valuable petrochemical products by cracking heavier components. However, many difficulties exist in modeling the FCC process due to its complexity. In this study, a dynamic process model of a FCC process is suggested and its structural observability is analyzed. In the process modeling, yield function for the kinetic model of the riser reactor was applied to explain the product distribution. Hydrodynamics, mass balance and energy balance equations of the riser reactor and the regenerator were used to complete the modeling. The process model was tested in steady-state simulation and dynamic simulation, which gives dynamic responses to the change of process variables. The result was compared with the measured data from operating plaint. In the structural analysis, the system was analyzed using the process model and the process design to identify the structural observability of the system. The reactor and regenerator unit in the system were divided into six nodes based on their functions and modeling relationship equations were built based on nodes and edges of the directed graph of the system. Output-set assignment algorithm was demonstrated on the occurrence matrix to find observable nodes and variables. Optimal locations for minimal addition of measurements could be found by completing the whole output-set assignment algorithm of the system. The result of this study can help predict the state more accurately and improve observability of a complex chemical process with minimal cost.

• Journal of Information Processing Systems
• /
• v.18 no.6
• /
• pp.729-740
• /
• 2022

Netflix, Amazon Prime, and YouTube are the most popular and fastest-growing streaming services globally. It is a matter of great interest for the streaming service providers to preview their service infrastructure and streaming strategy in order to provide new streaming services. Hence, the first part of the paper presents a detailed survey of the Content Distribution Network (CDN) and cloud infrastructure of these service providers. To understand the streaming strategy of these service providers, the second part of the paper deduces a common quality-of-service (QoS) model based on rebuffering time, bitrate, progressive download ratio, and standard deviation of the On-Off cycle. This model is then used to analyze and compare the streaming behaviors of these services. This study concluded that the streaming behaviors of all these services are similar as they all use Dynamic Adaptive Streaming over HTTP (DASH) on top of TCP. However, the amount of data that they download in the buffering state and steady-state vary, resulting in different progressive download ratios, rebuffering levels, and bitrates. The characteristics of their On-Off cycle are also different resulting in different QoS. Hence a thorough adaptive bit rate (ABR) analysis is presented in this paper. The streaming behaviors of these services are tested on different access network bandwidths, ranging from 75 kbps to 30 Mbps. The survey results indicate that Netflix QoS and streaming behavior are significantly consistent followed by Amazon Prime and YouTube. Our approach can be used to compare and contrast the streaming services' strategies and finetune their ABR and flow control mechanisms.

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.615-626
• /
• 2003

The applied model for this study area is WINFLOW using mite element method, It is thought that the simulation result by WINFLOW model under the steady flow state reflects well the ground water distribution within the reliability level which shows the error range of 1.1% to 8.0% from the comparison between the computed values and the observed, and analyzed that the constant head distribution is shown along the east-west direction and gentle and stable head gradient along the north-south direction. Ground water of the study area shows stable movement from the south to the stream area, and the particle trace for each location shows relatively linear shape from the upstream to the pumping location while the radius of influence according to the pumping amount shows a significant difference at the down stream area from the pumping location. The simultaneous pumping from P and P1 shows more complicated appearance, not the increase of the radius of influence than pumping from a single well P or P1, and it is analyzed that the particle path takes nearly linear form. It is known that the flow direction of the ground water and the velocity of the flow affect on the magnitude of the radius of influence of the wells from the fact that the more decreasing pattern of the ground water head is observed at the side of the well and the down stream area than the upstream area when the ground water moves from south to north regarding the radius of influence according to the pumping amount. Satisfactory results in analyses of ground water movement are obtained through the significant reduction of the physical uncertainties in the flow system as well as the relatively convenient model application using WINFLOW model which is proposed in this study.