• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.201-203
• /
• 2003

This paper presents a simple electronic stater for single phase induction motor(SPIM). To obtain a starting torque, the phase angle of the auxiliary winding is controlled using simple gate trigger control circuit. Because of this electronic stater circuit consists of some passive element and switching device, it is simple and robust. The experimental result shows some good results, and verifies the proposed electronic starter.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.76-79
• /
• 1999

This paper describes real power difference continuous and on/off operation of ballast for fluorescent lamps. We tested ballasts for fluorescent lamps, such that glow stater ballast, rapid stating ballast, and electronic ballast. We measured consumed real power. Input voltage is A.C. 220V and ON time 8 is minutes, OFF time 2 is minutes.

• 한국미생물·생명공학회지
• /
• 제22권5호
• /
• pp.544-549
• /
• 1994

Lactobacilli proliferating in fermented sausages of the specific ripening conditions were isolated from fermented sausages, manufactured in the absence of an added starter, during ripening under controlled temperature-humidity conditions. Based on morphological, physiological and bio- chemical characteristics and carbohydrate fermentation of isolated strains, three strains of isolates were identified as Lactobacillus curvatus, two strains as Lactobacillus sake. Optimal temperature and pH for growth of isolated strains were 30$\circ$C and pH 6.0~7.0, respectively. These strains were salt tolerant, multiplying in the presense of 6~8% NaCl.

• 벤처창업연구
• /
• 제10권5호
• /
• pp.127-135
• /
• 2015

처음 창업을 하게 되면 성공과 실패의 순간을 맛보게 된다. 창업의 조건은 자신의 적성에 맞는 자금력 있는 입지선정과 강인한 창업가정신 등의 경영전략이 필요하다. 그런데 초보창업자는 부동산 거래에 있어서 이중매매와 같은 불의의 사고가 발생하는 경우가 있다. 우리나라 부동산거래 관행은 체계적인 도움을 받기 어려우며, 법률적으로 해결되었다고 하더라도 피해자의 피해는 그대로 남게 되는 어려운 문제가 발생하게 된다. 따라서 그동안 법률적으로 이중매매를 배임죄 등으로 가해자를 처벌하는 문제를 넘어서 이제는 피해를 입은 피해자에 대한 경영학적 접근을 통한 전략이 필요한 때이다. 부동산의 이중매매와 같은 거래사고에 대하여 초보창업자에게 부동산 거래사고 예방을 위한 경영전략은 어떠한지에 관하여 검토 해 보기로 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.753-755
• /
• 2002

This paper presents the characteristic analysis by changing the shape and position of auxiliary pole core for Automotive stater motor. The brush contact resistance and mechanical loss calculated from the experimental data are used in characteristic analysis. The Finite Element Analysis Method(FEM) and 3D Equivalent Magnet Circuit Network(EMCN) are used for analysis. The validity of the proposed methods are verified by comparison of analysis results and experimental ones.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.78-83
• /
• 2000

An iterative time marching procedure for solving incompressible internal flow has been applied to the flow around a rotor-stator. This procedure solves three-dimensional incompressible Reynolds-averaged Navier-Stokes equation on a moving, time-deforming, non-orthogonal body-fitted grid using second-order accurate schemes for the time derivatives and third/second-order accurate schemes for the spatial derivatives. To handle rotationg geometry, the multiblock technique is applied and the overall flow domain is subdivided into two blocks. In each block, a grid is generated and flowfield is solved independently of the other blocks. The boundary data for each block is provided by the neighboring blocks using bilinear interpolation technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.692-694
• /
• 1992

This paper describes a robust flux bonging scheme which utilizes the windings of the machine itself to implement field orientation control of SLIM (Single-sided Linear Induction Motor). By subtracting the voltage across adjacent motor coils of the same phase which are named STATOR TAPPED COIL, a flux signal is obtained which is insensible to stater resister drop at a low speed that exerts a bad Influence on field orientation. The method using STATOR TAPPED COIL has been implemented at SLIM in our laboratory, and experimental results are being scrutinized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.326-329
• /
• 1997

The surface of mica/epoxy paper(130${\mu}{\textrm}{m}$) is investigated with SEM(scanning electron microscope). SEM micrographs revealed that thermal aging has a strong influence on aged specimens. The mica/epoxy paper was exposed at 187$^{\circ}C$ in an ordinary electrical oven for 72hour. Stater windings from two generators were measured by tan delta(tan $\delta$)and maximum partial discharge(Qm). The values of tan $\delta$and Qm were fecund to be higher for new generator than old one. The insulation condition of mica/epoxy paper were measured by ac current and tan $\delta$. Test results are observed that the sound specimens are higher than those aged. Model bar coils subjected to various accelerated agings were evaluated by Qm.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.418-422
• /
• 2001

This paper presents a developed squired cage induction motor for axial flow fan. The developed squirrel cage induction noter for axial flow fan is exchanged the position, rotor and stater. In this method a fan blade is attached to outside rotor. So we can protect the motor from rain and reduce noise, and there is no need to have bending duct to locate the fan motor. Carried out experimental test with this induction motor, and the results were as follows. Starting torque was 21kgㆍcm@120V, maximum efficiency was 0.84@120V. The characteristics of tests were the same as double squirrel-cage type IM.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1501-1510
• /
• 2004

The pumping characteristics of a single-stage disk-type drag pump (DTDP) are calculated for the variation of the vertical clearance between a rotor and stator by the three-dimensional direct simulation Monte Carlo (DSMC) method. The gas flow mainly belongs to the molecular transition flow region. Spiral channels of a DTDP are cut on the both the upper and lower sides of a rotating disk, but a stationary disk is planar. The interaction between molecules is described by the variable hard-sphere model. The no time counter method is used as a collision sampling technique. The vertical clearance has a significant effect on the pumping performance. Experiments are performed under the outlet pressure range of 0.4∼533 Pa. When the numerical results are compared with the experimental data, the numerical results agree well quantitatively