• Journal of Magnetics
• /
• 제22권1호
• /
• pp.146-149
• /
• 2017

In this study, we compared the standardized value of each signal intensity, the apparent diffusion coefficient (ADC) that digitizes the diffusion of water molecules, and the signal to noise ratio (SNR) using b value 0 400, 1400 ($s/mm^2$). From March 2013 to December 2013, patients with suspicion of simple compound fracture and metastatic spine cancer were included in the MR readout. We used a 1.5 Tesla Achieva MRI system and a Syn-Spine Coil. Sequence is a DWI SE-EPI sagittal (diffusion weighted imaging spin echo-echo planar imaging sagittal) image with b-factor ($s/mm^2$) 0, 400, 1400 were used. Data analysis showed ROI (Region of Interest) in diseased area with high SI (signal intensity) in diffusion-weighted image b value 0 ($s/mm^2$) Using the MRIcro program, each SI was calculated with images of b-value 0, 400, and 1400 ($s/mm^2$), ADC map was obtained using Metlab Software with each image of b-value, The ADC is obtained by applying the ROI to the same position. The standardized values ($SI_{400}/SI_0$, $SI_{400}/SI_0$) of simple compression fractures were $0.47{\pm}0.04$ and $0.23{\pm}0.03$ and the standardized values ($SI_{400}/SI_0$, $SI_{400}/SI_0$) of the metastatic spine were $0.57{\pm}0.07$ and $0.32{\pm}0.08$ And the standardized values of the two diseases were statistically significant (p < 0.05). The ADC ($mm^2/s$) for b value 400 ($s/mm^2$) and 1400 ($s/mm^2$) of the simple compression fracture disease site were $1.70{\pm}0.16$ and $0.93{\pm}0.28$ and $1.24{\pm}0.21$ and $0.80{\pm}0.15$ for the metastatic spine. The ADC ($mm^2/s$) for b value 400($s/mm^2$) was statistically significant (p < 0.05) but the ADC ($mm^2/s$) for b value 1400 (p > 0.05). In conclusion, multi - b value recognition of signal changes in diffusion - weighted imaging is very important for the diagnosis of various spinal diseases.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.472-476
• /
• 2011

Railway R&D technology development projects for the economic value of technology development does not mention the estimated economic impact on future policies must reflect the issues that are raised. In the research phase of technology development by providing value and economic effects can increase the utilization of technology development are considered. However, some items in some way to analyze and quantify its effect on what the procedures are not standardized, not as needed by individual researchers and analysis by providing a variety of reliability problems can occur. Therefore, the development of technologies to measure the value and economic impact analysis and the development of a standardized manual is needed. In this paper, development of railway technology R & D performance (technical, economic) to be estimated by an objective analysis of standardized and that man should aim to create. And the standard manual of the national economic effect in the development of technologies (production inducement effect, the effect of import substitution industries, including analysis using the taxable year), due to technology development and economic benefits (investment in railways in the handbook and the feasibility of the proposed railway project to produce various ally standards), technology development, and on which to base the valuation will.

• Animal Bioscience
• /
• 제35권3호
• /
• pp.453-460
• /
• 2022

Objective: The objective was to test additivity of digestible energy and nutrient concentrations in the hatchery byproduct mixture fed to nursery pigs. Methods: In the previous studies, energy, phosphorus, calcium, and amino acid digestibility of infertile eggs, unhatched eggs, culled chicks, and a mixture of 3 hatchery byproduct ingredients was determined in nursery pigs (initial body weight = 9.4 to 14.2 kg). An additivity test was conducted using these determined values. Results: No difference was observed between determined and predicted metabolizable energy values in the mixture (3,998 and 3,990 kcal/kg as-is basis, respectively). Measured standardized total tract digestible phosphorus in the mixture was less than the predicted value (4.5 vs 5.3 g/kg as-is basis, respectively; p<0.05). Measured standardized total tract digestible calcium in the mixture was greater compared with the predicted value (40.0 vs 31.7 g/kg as-is basis, respectively; p<0.05). Measured standardized ileal digestible tryptophan in the mixture was greater than the predicted value (3.7 vs 3.1 g/kg as-is basis, respectively; p<0.05) whereas other amino acid values were additive. Conclusion: Energy and most of amino acid concentrations in hatchery byproducts are additive in the mixture fed to nursery pigs.

• 한국작물학회지
• /
• 제49권6호
• /
• pp.516-521
• /
• 2004

본 연구는 재배되고 있는 벼 품종들의 볏짚 사료가치를 구명하고 이에 관련되는 형질을 검토하고자 수행하였다. 볏짚은 질이 낮은 조사료이므로 사료가치 평가를 볏짚수량, 조단백질함량, ADF 및 NDF 함량을 지표로 한 표준화점수, RFV 및 군집분석에 의하여 수행하였으며 그 결과를 요약하면 다음과 같다. 1 볏짚수량은 대안벼가 725.9 kg/10a로 가장 높았고, 금남 벼, 동진 벼 1호, 추청 벼 순으로 높았다. 조단백질함량은 다산벼가 $5.35\%$로 가장 높았다. 2. ADF는 중화 벼가 $34.3\%$로 가장 낮았으며, NDF는 소백벼가 $63.8\%$로 가장 낮았다. 3. 표준화합산점수, RFV 및 군집분석에 의하여 사료가치를 평가한 결과 둔내벼, 오봉벼, 서안벼, 금오벼, 화성벼, 농안벼, 계화벼가 사료가치가 높은 것으로 나타났다. 4. 조단백질함량과 관련된 형질은 엽건물중과 종실건물중이 정의 관계였고, ADF 및 NDF와 관련된 형질은 파종후부터 출수일 까지의 일수, 간장, 엽건물중이 정의 관계였고, 줄기의 건물중이 부의 관계로 나타나 줄기의 건물중이 증가할수록 감소하는 경향이었다. 5.표준화점수 및 RFV의 사료가치와 관련된 분석에서 줄기 건물중 만이 정의 관계를 보이고, 나머지 형질들은 부의 관계를 보여, 볏짚의 사료가치는 줄기의 비율이 높아 소화율을 증가시키는 품종이 높음을 알 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권1호
• /
• pp.19-25
• /
• 2018

Objective: In practical breeding, selection is often performed by ignoring the accuracy of evaluations and applying economic weights directly to the selection index coefficients of genetically standardized traits. The denominator of the standardized component trait of estimated genetic evaluations in practical selection varies with its reliability. Whereas theoretical methods for calculating the selection index coefficients of genetically standardized traits account for this variation, practical selection ignores reliability and assumes that it is equal to unity for each trait. The purpose of this study was to clarify the effects of ignoring the accuracy of the standardized component trait in selection criteria on selection responses and economic weights in retrospect. Methods: Theoretical methods were presented accounting for reliability of estimated genetic evaluations for the selection index composed of genetically standardized traits. Results: Selection responses and economic weights in retrospect resulting from practical selection were greater than those resulting from theoretical selection accounting for reliability when the accuracy of the estimated breeding value (EBV) or genomically enhanced breeding value (GEBV) was lower than those of the other traits in the index, but the opposite occurred when the accuracy of the EBV or GEBV was greater than those of the other traits. This trend was more conspicuous for traits with low economic weights than for those with high weights. Conclusion: Failure of the practical index to account for reliability yielded economic weights in retrospect that differed from those obtained with the theoretical index. Our results indicated that practical indices that ignore reliability delay genetic improvement. Therefore, selection practices need to account for reliability, especially when the reliabilities of the traits included in the index vary widely.

• 한국식품조리과학회지
• /
• 제17권6호
• /
• pp.589-597
• /
• 2001

This study was conducted to develop a standardized Korean cold noodle stock recipe which can be used in food service establishments. The qualities of three kinds of stock made of beef rib only(B group), beef rib added with chicken(BC group), and beef rib added with chicken and vegetable(BCV group) were investigated by using sensory evaluation and instrumental analyses for free amino acids and nucleotides during heating (2, 3, 4, and 6 hr) at 90$\pm$ 5$\^{C}$ The highest amino acid contained in B, BCV, and BCV groups was arginine followed by alanine, glycine, and glutamic acid. B and BC groups was extracted to the best contents of amino acids by heating for 4 hours but BCV group for 3 hours. Nucleotides were extracted from B and BC group between 3 and 4 hours of heating but in BCV group between 2 and 3 hours. In sensory evaluation, BCV group obtained the highest score for overall preference. In the measurement of color difference, BCV group was the lowest in L value(lightness) but the highest in b value(yellowness).

• Radiation Oncology Journal
• /
• 제37권1호
• /
• pp.30-36
• /
• 2019

Purpose: This study aimed to identify the feasibility of the maximum standardized uptake value (SUVmax) on baseline 18F-fluorodeoxyglucose positron emission tomography-computed tomography (FDG PET/CT) as a predictive factor for prognosis in early stage primary lung cancer treated with stereotactic body radiotherapy (SBRT). Materials and Methods: Twenty-seven T1-3N0M0 primary lung cancer patients treated with curative SBRT between 2010 and 2018 were retrospectively evaluated. Four patients (14.8%) treated with SBRT to address residual tumor after wedge resection and one patient (3.7%) with local recurrence after resection were included. The SUVmax at baseline PET/CT was assessed to determine its relationship with prognosis after SBRT. Patients were divided into two groups based on maximum SUVmax on pre-treatment FDG PET/CT, estimated by receiver operating characteristic curve. Results: The median follow-up period was 17.7 months (range, 2.3 to 60.0 months). The actuarial 2-year local control, progression-free survival (PFS), and overall survival were 80.4%, 66.0%, and 78.2%, respectively. With regard to failure patterns, 5 patients exhibited local failure (in-field failure, 18.5%), 1 (3.7%) experienced regional nodal relapse, and other 2 (7.4%) developed distant failure. SUVmax was significantly correlated with progression (p = 0.08, optimal cut-off point SUVmax > 5.1). PFS was significantly influenced by pretreatment SUVmax (SUVmax > 5.1 vs. SUVmax ≤ 5.1; p = 0.012) and T stage (T1 vs. T2-3; p = 0.012). Conclusion: SUVmax at pre-treatment FDG PET/CT demonstrated a predictive value for PFS after SBRT for lung cancer.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권6호
• /
• pp.553-560
• /
• 2018

PET-CT and PET-MRI which integrates CT using ionized radiation and MRI using phenomena of magnetic resonance are determined to have the limitation to apply the semi-quantitative index, standardized uptake value (SUV), with the same level due to the fundamental differences of image capturing principle and reorganization, hence, their correlations were analyzed to provide their clinical information. To 30 study subjects maintaining pre-treatment, $^{18}F-FDG$ (5.18 MBq/㎏) was injected and they were scanned continuously without delaying time using $Biograph^{TM}$ mMR 3T (Siemens, Munich) and Biograph mCT 64 (Siemens, Germany), which is an integral type, under the optimized condition except the structural differences of both scanners. Upon the measurement results of $SUV_{max}$ setting volume region of interest with evenly distributed radioactive pharmaceuticals by captured images, $SUV_{max}$ mean values of PET-CT and PET-MRI were $2.94{\pm}0.55$ and $2.45{\pm}0.52$, respectively, and the value of PET-MRI was measured lower by $-20.85{\pm}7.26%$ than that of PET-CT. Also, there was a statistically significant difference in SUVs between two scanners (P<0.001), hence, SUV of PET-CT and PET-MRI cannot express the clinical meanings in the same level. Therefore, in case of the patients who undergo cross follow-up tests with PET-CT and PET-MRI, diagnostic information should be analyzed considering the conditions of SUV differences in both scanners.

• 대한의용생체공학회:의공학회지
• /
• 제39권6호
• /
• pp.237-242
• /
• 2018

$^{18}F$-fludeoxyglucose PET (FDG-PET) can help finding an abnormal metabolic activity in brain. In this study, we evaluated an efficiency of volume- and cortical surface-based analysis which were used to determine whether standardized uptake value ratio (SUVR) of FDG-PET was different among Alzheimer's disease (AD), mild cognitive impairment (MCI), and healthy control (HC). Each PET image was rigidly co-registered to the corresponding magnetic resonance imaging (MRI) using mutual information. All voxels of the co-registered PET images were divided by the mean FDG uptake of the cerebellum cortex which was thresholded by partial volume effect (>0.9). Also, the SUVR value of each vertex was linearly interpolated from volumetric SUVR image which was thresholded by gray matter partial volume effect (>0.1). Lobar mean values were calculated from both volume- and cortical surface-based SUVRs. Statistical analysis was conducted to compare two measures for AD, MCI and HC groups. Even though the results of volume (SUVR_vol) and cortical surface-based SUVR (SUVR_surf) analysis were not significantly different from each other, the latter would be better for detecting group differences in SUVR of PET.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권12호
• /
• pp.1693-1702
• /
• 2009

Economic values of 14 production and functional traits for two Slovak dairy sheep breeds (Improved Valachian and Tsigai) were calculated. Semi-extensive production systems with one lambing per year were simulated using a bio-economic deterministic computer model. The marginal economic value of a trait was defined as the partial derivative of the profit function with respect to that trait. The relative economic value expressed the percentage proportion of standardized economic value (marginal economic value${\times}$genetic standard deviation) of a trait in the sum of the absolute values of the standardized economic values over all traits. Milk yield was of highest relative importance (26% and 32% in Improved Valachian and Tsigai) followed by productive lifetime and conception rate of ewes (16% and 15% in Improved Valachian and Tsigai, in both traits). Conception rate of female lambs and litter size had nearly the same relative economic importance in both breeds (9% to 11%). Survival rate of lambs at lambing and till weaning reached slightly lower economic values (4% to 7%). The economic importance of all remaining traits was less than 4%.