• 제목/요약/키워드: standard size

검색결과 3,312건 처리시간 0.043초

임플란트 경부 디자인이 변연골 응력에 미치는 영향 (Influence of crestal module design on marginal bone stress around dental implant)

  • 임정열;조진현;조광헌
    • 대한치과보철학회지
    • /
    • 제48권3호
    • /
    • pp.224-231
    • /
    • 2010
  • 연구 목적: 본 연구에서는 임플란트 경부 디자인의 측면에서 미세나사, 치은 관통부의 곡면 디자인 적용 및 경부 역사면 부여효과를 직접 비교하여 정량적인 평가를 하고자 하였다. 연구 재료 및 방법: 직경 4.1 mm, 길이 10 mm 의 매립형 (submerged) 고정체 (Dentis Co., Daegu, Korea)를 기본 형상으로 설정하였다. 실험 모델로는 대조 모델의 경부 주위, 즉 치은 관통부/지대주 체결 방법에 변화를 준 다섯 가지 경우로 설정하였다 (실험 모델 I: 경부측 3 mm에 높이 0.15 mm, 피치 0.3 mm의 미세나사 (microthread)가 가공된 모델, 실험 모델II: 실험 모델 I 과 동일한 고정체이나, 매립형이 아니라 1-stage 형 (internal type) 디자인을 가진 미세나사가 가공된 모델, 실험 모델 III: 매식부 나사산은 대조 모델과 동일하나 1-stage 형 경부 디자인을 가지는 미세나사가 가공되지 않은 모델, 실험 모델 IV: 일체형 (one piece system) 임플란트로 치은 관통부에 3 mm 직경의 만곡 (concavity)형상을 갖는 모델, 실험 모델 V : 매식부 나사산 및 지대주는 대조 모델과 동일하나 고정체 platform 가장 자리에 높이 1 mm 의 역사면 (reverse bevel)을갖는모델). 유한요소해석을 위해 PC용으로 출시된 상용 프로그램인 NISA II/Display III (EMRC, Troy, MI, USA)를 사용하여, 축대칭으로 임플란트/악골 조합을 모델링하였다. 고정체 형상은 동일하나 경부 (및 치은 관통부) 디자인에 차이가 있는 여섯 종의 임플란트 (대조 모델 + 다섯 종 실험 모델)를 9 mm 폭경의 악골에 식립하고 임플란트 장축에 대해 30도의 각도를 갖는 100 N의 하중을 받는 조건으로 임플란트/골 복합체의 응력을 해석하였다. 결과:실험 모델 I과 실험 모델 IV에서 변연골 응력이 약간 낮았으나 실험 모델 II, III, 실험 모델 V는 대조 모델보다 변연골 응력이 높았다. 최대 절점응력이 기록된 임플란트로부터 0.2 mm 떨어진 위치에서의 응력은 실험 모델 III에서 21.11 MPa로 가장 높았고 실험 모델 II와 실험 모델 V는 비슷한 수준으로 각각 18.39 MPa, 17.88 MPa이었으며 실험 모델 I, IV는 대조모델의 15.09 MPa 보다 약간 낮은 14.78 MPa, 14.63 MPa 였다. 결론: 경부의 미세나사와 치은 관통부의 곡면 (concavity) 부여가 변연골의 응력집중 방지에 효과가 있는 것으로 분석되었다.

작은 직경 임플란트를 이용한 임플란트 지지 피개의치에 대한 환자 만족도 조사 (Patients satisfaction for implant supported overdenture with small diameter implant)

  • 이상엽;최대균;백장현;권긍록
    • 대한치과보철학회지
    • /
    • 제49권1호
    • /
    • pp.29-37
    • /
    • 2011
  • 연구 목적: 양악 총의치를 사용 중인 환자를 대상으로 하악에 4개의 작은 직경의 임플란트를 식립하여 implant supported overdenture로 전환 시 환자의 만족도 (저작, 유지, 발음, 심미, 사회적 문제, 심리적 문제)를 평가하였다. 연구 재료 및 방법: 60세 이상의 완전 무치악 환자 중 상하악 총의치를 장착한 환자를 대상으로 하였다. 수술 전에 진단 스텐트를 이용한 방사선 사진 (CT, panorama) 촬영을 시행하고 현재 사용하고 있는 의치에 대한 만족도에 대해 조사하였다. 그 후 하악 이공 전방부에 4개의 mini dental implant 식립 및 immediate loading 후 방사선 사진 촬영을 하였다. 식립 1달 후와 3달 후에 방사선 사진을 촬영하였으며 수술 전과 동일한 설문지를 통한 overdenture 사용 시 만족도 조사하였다. 결과: 현재 9명의 환자를 대상으로 시행하였다. 1. 총 36개의 임플란트를 식립하였으며 이중 1개의 임플란트가 실패하여 97.2%의 생존률을 보였다. 2. 임플란트 식립 전, 후 만족도 비교는 oral health impact profile 49를 이용한 설문 조사를 통해 이루어 졌다. 저작 시 불편감, 유지, 발음, 심미, 사회적 활동시 불편감, 심리적 불편감 등으로 비교 분석하였으며 5점 기준으로 불편감이 심할 수록 낮은 점수를 부여하였다. 그 결과 전반적으로 만족도가 상승하였다. 그 중 유지력 면에서 가장 크게 만족도가 상승하였으며 사회활동시 불편감, 심리적 불편감, 저작시 불편감, 심미, 발음 순으로 개선되었다. 결론: 이번 연구를 통하여 mini dental implant를 이용한 의치를 사용시 환자의 만족도가 높아진 것을 볼 수 있었다. 추 후 좀 더 많은 환자를 통해 장기간 연구를 할 예정이며 추가적인 방사선 사진을 촬영하여 임플란트 주위 골 소실 여부를 관찰할 예정이다.

단동온실 내 공기순환팬 사용에 따른 온습도 및 에너지소비량 비교 분석 (Analysis of Air Temperature and Humidity Distributions and Energy Consumptions according to Use of Air Circulation Fans in a Single-span Greenhouse)

  • 이태석;강금춘;김형권;문종필;오성식;권진경
    • 생물환경조절학회지
    • /
    • 제26권4호
    • /
    • pp.276-282
    • /
    • 2017
  • 본 연구는 방울토마토 재배 단동온실에 공기순환팬을 설치하고 공기순환팬이 온실 내 온도 및 습도 분포, 에너지소비량에 미치는 영향을 분석하였다. 공기순환팬은 날개 크기 230mm의 Stainless 팬으로, Lee 등(2016)의 연구결과를 참고하여 시험구 온실에 9m 간격으로 총 18대를 설치하였다. 온실 내부 온습도는 온실 길이방향으로 4등분하여 1/4 지점과 3/4 지점의 중앙에 센서를 설치하고 0.8m, 1.8m 높이 2곳의 온습도를 난방을 주로 하는 야간(오후 6시~다음 날 오전 7시)에 5분 간격으로 측정하였다. 에너지소비량은 각 온실에 위치한 온수펌프의 유량, 온수 출수부와 환수부의 온도차를 측정하여 계산하였다. 공기순환팬을 사용하지 않았을 때 측점 간 온도차 및 습도차의 평균값은 $0.75^{\circ}C$, 2.19%였으며 공기순환팬 사용 시 측점 간 온도차 및 습도차의 평균값은 $0.42^{\circ}C$, 1.27%로 감소하였다. 공기순환팬 설치 온실과 미설치 온실의 누적 에너지소비량은 각각 4,673kWh, 4,009kWh로 공기순환팬 설치 온실에서 약 14.2%의 에너지를 적게 소모하였다. 이러한 결과로 보아 온실 내 공기순환팬 사용은 공기를 지속적으로 교반시켜 주어 온실 전체의 온도 및 습도를 균일하게 만들고, 공기의 온도가 빠르게 변하지 않도록 해주어 난방 장치의 가동 시간과 에너지소비량을 줄일 수 있다.

폐암의 조직학적 분류에 따른 종양의 FDG 섭취와 CT 조영증강정도에 관한 연구 (FDG Uptake and a Contrast Enhancement According to Histopathologic Types in Lung Cancers)

  • 한유미;최재걸;김영철;박은경
    • Nuclear Medicine and Molecular Imaging
    • /
    • 제43권1호
    • /
    • pp.19-25
    • /
    • 2009
  • 목적: 폐암에서 양전자단층촬영(PET-CT)에서의 2[F-18]-fluoro-2-deoxy-d-glucose (FDG)의 최대 표준화섭취(SUVmax)와 전산화단층찰영(CT)에서의 조영증장정도에 서로 연관성이 있는지를 알아보고 SUVmax와 조영증강 정도에 있어 폐암의 조직학적 유형간에 유의한 차이가 있는지를 평가 하고자 하였다. 대상 및 방법: PET-CT와 조영증강 흥부 CT를 시행하고 조직학적으로 원발성 폐암으로 확진된 환자 53명을 대상으로 하였다. 초기 및 지연 PET-CT영상에서의 종양의 SUVmax (SUV1, SUV2), 지연영상에서의 SUVmax의 증가정도(SUVd), 잔류지수(RI) 및 종양의 CT 조영증강정도를 측정하고 상관관계를 알아보았으며, 이 변수들의 폐암의 조직학적 유형에 따른 차이와 종양내부에서 차이를 평가하였다. 결과: 평균값과 표준 편차는 SUV1이 $8.3{\pm}4.4$, SUV2가 $10.7{\pm}5.7$, SUVd가 $2.4{\pm}1.6$, RI가 $30{\pm}14$, 조영증강정도가 $47.1{\pm}14.8$ HU (Hounsfield Unit)이었다. 조직학적 유형 간 SUV1과 조영증강정도에는 차이가 없었다. SUV1과 SUVd 사이에는 r=0.74(p<0.01), SUV1과 종양의 크기 사이에는 r=0.58 (p<0.01)로 유의한 상관관계가 있었고 SUV1과 조영증강정도 사이에는 상관관계가 없었다(r=0.06, p=0.69). 같은 종양 내부에서 최대 FDG 섭취부위와 최대 조영증강부위가 일치하지 않는 경우가 10예 있었다. 결론: 폐암에서의 FDG 섭취정도와 CT 조영증강정도는 서로 유의한 양적인 선형 상관관계를 보이지 않았으며 조직학적 분류에 따른 FDG 섭취나 조영증강정도의 차이도 없었다.

Hydronephrosis 환자의 Kidney MAG3 검사 시 Background ROI 설정에 따른 신장 상대 섭취율 변화에 관한 연구 (Research on Changing of Renal Relative Uptake Depending on the Setting of Background ROI in Kidney MAG3 Study of Hydronephrosis Patients)

  • 노익상;안병호;김수영;최성욱
    • 핵의학기술
    • /
    • 제17권2호
    • /
    • pp.25-30
    • /
    • 2013
  • 신장의 기능을 평가하는데 있어 신장 상대 섭취율(Renal Relative Uptake: %)은 매우 중요한 의미를 가지며, 이는 신장과 background의 Region Of Interest (ROI) 설정에 따라 많은 영향을 받게 된다. 특히 hydronephrosis 환자의 경우 육안으로 신장의 위치와 형태, 크기 등을 식별하기 어려운 경우도 있어 사용자가 설정하는 ROI에 따라 결과 값이 많은 차이를 나타내기도 한다. 본 연구는 일정한 신장의 ROI를 전제로 background ROI 설정을 변화시키며 신장 상대 섭취율을 분석하여 결과에 어떠한 영향을 미치는지 연구하였다. 2012년 1월부터 2013년 2월까지 삼성서울병원을 내원하여 Kidney MAG3 검사를 실시한 hydronephrosis 환자 27명을 대상으로 하였다. 환자에게 $^{99m}Tc-MAG3$ 185 MBq (5 mCi)을 정맥주사 후 데이터를 획득하였고, 환자의 영상을 재구성하면서 ROI를 설정하는 과정에서 background ROI를 변화시켰다. 첫째, renal processing 과정에서 자동으로 설정되는 automatic ROI와 사용자가 직접 설정하는 manual ROI를 비교하였다. 둘째, ROI 설정 위치를 신장의 위, 옆, 아래 부분으로 구분하여 설정하였다. 셋째 background 설정 시간을 1-2분, 2-3분으로 구분하여 비교하였다. Automatic ROI와 manual ROI의 신장 상대섭취율을 비교한 결과 약 3.7%p 차이가 나타났고, hydronephrosis가 있는 신장은 직접 ROI를 설정하는 경우 신장 상대 섭취율이 소폭 감소하는 경향을 보였다. ROI 위치에 따른 연구에서 아래쪽에 background를 설정한 결과 값이 가장 근접한 신장 상대 섭취율을 나타내었고, 위쪽의 경우 매우 큰 편차를 보였다. Background 설정 시간에 따른 결과에서 4%p 차이를 확인할 수 있었다. Hydronephrosis의 환자의 경우, automatic ROI는 위치를 설정하는데 오차가 적지 않게 나타났고, 사용자가 설정하는 ROI 위치에 따라서도 큰 폭의 변동성을 나타내었다. 이는 정상 신장에 비해 적은 count 섭취와 주변 조직과의 상대적인 관계에서 야기된 것으로 보인다. 따라서 신장과 background의 ROI를 설정할 시 보다 폭넓게 다양한 변수를 고려하여 오차를 최소화할 수 있는 방안을 연구해야 할 것이다.

  • PDF

PET/CT 2D와 3D 영상 획득에서 방사능 집적에 따른 방사능 농도의 평가 (Evaluation of Radioactivity Concentration According to Radioactivity Uptake on Image Acquisition of PET/CT 2D and 3D)

  • 박선명;홍건철;이혁;김기;최춘기;석재동
    • 핵의학기술
    • /
    • 제14권1호
    • /
    • pp.111-114
    • /
    • 2010
  • 양전자 방출 단층촬영은 세포의 생화학적 변화에 따른 방사성의약품의 집적 정도를 영상화함으로서 암을 조기에 진단할 수 있는 검사방법으로 알려져 있다. 이러한 집적 정도는 여러 가지 원인에 따라 발생될 수 있는 것으로 $^{18}F$-FDG 주사량, 종양의 크기, 혈중 포도당 농도 등이 있다. 본 연구에서는 집적방사능과 2D와 3D 영상 획득이 방사능 농도(kBq/mL)에 미치는 영향에 대하여 평가하고자 한다. GE Discovery STe 16 PET/CT에서 1994 NEMA PET phantom을 이용하였으며, 배후방사능과 열소의 방사능 농도비가 1:2, 1:4, 1:8, 1:10, 1:20, 1:30 표준이 되도록 하여 2D와 3D로 영상을 획득하였다. 재구성 방법으로 2D와 3D 모두에서 반복연산법으로 반복횟수 2회, 부분집합 20을 적용하였다. 그리고 CT 감쇠보정법과 획득 시간은 10분으로 설정하였다. 또한 영상분석은 열소의 중심과 배후방사능에 동일한 관심영역을 설정 한 후 각 부분의 방사능 농도를 측정하여 비교 분석하였다. 설정된 관심영역의 배후방사능과 열소의 방사능 농도 비는 2D에서 1:1.93, 1:3.86, 1:7.79, 1:8.04, 1:18.72, 1:26.90, 3D는 1:1.95, 1:3.71, 1:7.10, 1:7.49, 1:15.10, 1:23.24 값을 얻었다. 또한 표준 방사능 농도비를 기준으로 한 백분율 차이(% Difference)는 2D에서 3.50%, 3.47%, 8.12%, 8.02%, 10.58%, 11.06%로 최소 3.47%에서 최대 11.06% 차이가 있고 3D는 3.66%, 4.80%, 8.38%, 23.92%, 23.86%, 22.69%로 최소 3.66%에서 최대 23.92%까지의 차이를 나타냈다. 방사능 농도가 증가할수록 실제 집적된 방사능 농도의 차이가 커짐을 알 수 있으며, 2D가 3D보다 평균 약 10.6% 높게 집적되어 방사능 농도 변화에 영향을 적게 받는 것으로 나타났다. 따라서 임상환자의 추적 검사에서 영상 획득 방법을 변화할 시 정확한 정량 평가를 위해서 이점을 고려하여 적용하여야 한다.

  • PDF

영상 재구성 방법에 따른 Bone SPECT 영상의 질과 검사시간에 대한 실효성 비교 (Comparison of Effectiveness about Image Quality and Scan Time According to Reconstruction Method in Bone SPECT)

  • 김우현;정우영;이주영;류재광
    • 핵의학기술
    • /
    • 제13권1호
    • /
    • pp.9-14
    • /
    • 2009
  • 최근 영상 처리 기법의 발전으로 영상의 질은 저하시키지 않고 검사 소요시간을 단축시키는 방법들이 개발되고 있다. 특히 단층 촬영의 경우 영상 재구성 방법을 개선하여 영상의 질이 우수한 영상을 획득할 수 있게 되었다. Philips사의 PRECEDENCE 16 감마카메라를 이용해 보편적으로 시행하고 있는 분석법에 의한 FBP 방법과 반복법에 의한 Astonish, 3D OSEM 방법을 이용해 각각 영상을 재구성하여 정성적인 분석과 정량적인 분석을 통해 영상 획득시간을 다르게 한 영상간의 비교와, 동일한 시간으로 획득한 영상을 비교하여 영상의 질이 우수한 재구성 방법에 대해 연구 하였다. 정성적인 분석을 위해 blind test를 한 결과, 영상 획득시간에 따른 영상의 질은 거의 차이가 없는 것을 확인할 수 있었다. 또한 정량적인 분석을 통해서도 영상 획득시간에 따른 영상의 질은 통계적으로 유의한 차이가 없었다. 하지만 영상 획득시간이 동일한 영상을 재구성 방법에 따라 분석한 결과는 통계적으로 유의한 차이가 있음을 확인할 수 있었다. 영상의 질은 반복법을 이용하는 Astonish에 의해 재구성된 영상이 해상력이 좋고 임상적으로 진단적 정보를 제공하는데 우수한 영상으로 판단된다. 영상을 재구성하기 위한 소요시간이 길고 저장 공간의 부족 등으로 현재까지 많이 사용되지 않던 반복법에 의한 재구성 방법이 영상의 질은 향상시키고 검사시간은 단축 할 수 있는 방법이 될 수 있음을 확인하였다.

  • PDF

PET/CT 3차원 영상 획득에서 부분용적효과 감소를 위한 재구성법의 최적화 (The Optimization of Reconstruction Method Reducing Partial Volume Effect in PET/CT 3D Image Acquisition)

  • 홍건철;박선명;곽인석;이혁;최춘기;석재동
    • 핵의학기술
    • /
    • 제14권1호
    • /
    • pp.13-17
    • /
    • 2010
  • PVE는 PET/CT 3D 영상 획득에서 발생되는 것으로 평가값이 저평가되어 영상의 정확도를 떨어뜨리는 현상이다. 특히 이는 병소의 크기가 작고 분해능이 저하될수록 더 큰 오차를 초래하여 검사 결과에 영향을 줄 수 있다. 본 연구는 PVE에 영향을 줄 수 있는 매개변수의 변화를 이용하여 최적의 영상 재구성법을 알아보고자 한다. GE Discovery STE16 장비에서 NEMA 2001 IEC phantom을 이용하여 각기 다른 크기의 구체(직경 37, 28, 22, 17, 13, 10 mm)에 $^{18}F$-FDG를 열소와 배후방사능비 4:1로 주입하여 10분간 영상을 획득하였다. 재구성은 반복재구성법(iterative reconstruction)을 사용하였으며, 반복 횟수(iteration) 2~50회, 부분집합 수(subset number) 1~56개로 변화를 주었다. 분석은 영상의 구체부분에 관심영역(ROI)을 설정하고 최대 표준섭취계수($SUV_{max}$)를 이용하여 백분율 차이(% difference)와 신호대잡음비(SNR)를 산출하였다. 반복 횟수 2, 6, 13, 30, 50회 변화를 준 10 mm 구체의 $SUV_{max}$는 2.32, 3.60, 3.88, 3.88, 3.90이고, SNR은 0.36, 0.49, 0.47, 0.43, 0.41이었으며, 백분율 차이는 58.9, 38.5, 34.8, 35.7, 35.4%로 측정되었다. 또한 6회로 고정한 반복 횟수에 2, 5, 8, 20, 56으로 부분집합 수를 변화시킨 평균 $SUV_{max}$는 10mm의 구체에서 1.46, 3.10, 3.10, 3.48, 3.78로 측정되었으며, SNR은 0.19, 0.30, 0.40, 0.48, 0.45로 나타났다. 또한 각 구체의 SNR의 합은 2.73, 3.38, 3.64, 3.63, 3.38로 측정되었다. 반복 횟수 6회부터 20회까지는 평균 백분율 차이($73{\pm}1%$)와 평균 SNR ($3.47{\pm}0.09$)은 비슷한 값을 나타내었으며, 20회 이상에서는 noise의 영향으로 SUV가 저평가되는 현상이 증가하였다. 또한 동일한 반복 횟수의 경우에 부분집합 값의 변화에서 SNR은 8회부터 20회가 높은 구간($3.63{\pm}0.002$)으로 나타났다. 따라서 작은 병소의 PVE를 줄이기 위해서는 재구성 시간을 고려하여 반복 횟수 6회, 부분집합 수 8~20회에서 PVE를 가장 저감할 수 있다.

  • PDF

Reproducibility of Regional Pulse Wave Velocity in Healthy Subjects

  • Im Jae-Joong;Lee, Nak-Bum;Rhee Moo-Yong;Na Sang-Hun;Kim, Young-Kwon;Lee, Myoung-Mook;Cockcroft John R.
    • International Journal of Vascular Biomedical Engineering
    • /
    • 제4권2호
    • /
    • pp.19-24
    • /
    • 2006
  • Background: Pulse wave velocity (PWV), which is inversely related to the distensibility of an arterial wall, offers a simple and potentially useful approach for an evaluation of cardiovascular diseases. In spite of the clinical importance and widespread use of PWV, there exist no standard either for pulse sensors or for system requirements for accurate pulse wave measurement. Objective of this study was to assess the reproducibility of PWV values using a newly developed PWV measurement system in healthy subjects prior to a large-scale clinical study. Methods: System used for the study was the PP-1000 (Hanbyul Meditech Co., Korea), which provides regional PWV values based on the measurements of electrocardiography (ECG), phonocardiography (PCG), and pulse waves from four different sites of arteries (carotid, femoral, radial, and dorsalis pedis) simultaneously. Seventeen healthy male subjects with a mean age of 33 years (ranges 22 to 52 years) without any cardiovascular disease were participated for the experiment. Two observers (observer A and B) performed two consecutive measurements from the same subject in a random order. For an evaluation of system reproducibility, two analyses (within-observer and between-observer) were performed, and expressed in terms of mean difference ${\pm}2SD$, as described by Bland and Altman plots. Results: Mean and SD of PWVs for aorta, arm, and leg were $7.07{\pm}1.48m/sec,\;8.43{\pm}1.14m/sec,\;and\;8.09{\pm}0.98m/sec$ measured from observer A and $6.76{\pm}1.00m/sec,\;7.97{\pm}0.80m/sec,\;and\;\7.97{\pm}0.72m/sec$ from observer B, respectively. Between-observer differences ($mean{\pm}2SD$) for aorta, arm, and leg were $0.14{\pm\}0.62m/sec,\;0.18{\pm\}0.84m/sec,\;and\;0.07{\pm}0.86m/sec$, and the correlation coefficients were high especially 0.93 for aortic PWV. Within-observer differences ($mean{\pm}2SD$) for aorta, arm, and leg were $0.01{\pm}0.26m/sec,\;0.02{\pm}0.26m/sec,\;and\;0.08{\pm}0.32m/sec$ from observer A and $0.01{\pm}0.24m/sec,\;0.04{\pm}0.28m/sec,\;and\;0.01{\pm}0.20m/sec$ from observer B, respectively. All the measurements showed significantly high correlation coefficients ranges from 0.94 to 0.99. Conclusion: PWV measurement system used for the study offers comfortable and simple operation and provides accurate analysis results with high reproducibility. Since the reproducibility of the measurement is critical for the diagnosis in clinical use, it is necessary to provide an accurate algorithm for the detection of additional features such as flow wave, reflection wave, and dicrotic notch from a pulse waveform. This study will be extended for the comparison of PWV values from patients with various vascular risks for clinical application. Data acquired from the study could be used for the determination of the appropriate sample size for further studies relating various types of arteriosclerosis-related vascular disease.

  • PDF

다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형 (The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM)

  • 박지영;홍태호
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.